How to Change Tire Size with an Autel Scanner
Learn how to change tire size with an Autel scanner by updating vehicle configuration and checking speedometer calibration after the new tires are fitted.
Contents
- Why the vehicle configuration must match
- Walking through the scanner menus
- Checking speedometer calibration
- Tire Size Scanner Questions
- Can an Autel scanner change tire size on any vehicle?
- Does changing tire size with a scanner fix the speedometer?
- What do I need before changing the tire size?
- What happens if the vehicle configuration stays on the old size?
How to change tire size with an Autel scanner comes down to changing the vehicle configuration so the control modules know the new tire dimensions. The scanner writes the tire size or a matching configuration value into the vehicle, then you verify the speedometer calibration and related systems. The steps vary by model, so the tool menus follow the vehicle you select.
Why the vehicle configuration must match
Vehicle configuration tells each control module which tire dimension the car was built around. A module that still expects the old size can misreport wheel speed and set false warnings. Updating the configuration after a tire change keeps the electronics aligned with the rubber actually on the car. The Autel scanner is the interface that writes this value into the vehicle.
Walking through the scanner menus
Connect the Autel scanner to the diagnostic port and let it read the vehicle identification. Choose the configuration or tire size function for the body and chassis modules that store the dimension. Enter the new size exactly as the tool requests it, following the on-screen prompts. Confirm the write and let the tool report whether the change was accepted.
Checking speedometer calibration
Speedometer calibration depends on the stored tire dimension, so check the reading after the configuration change. Compare the indicated speed against a reference and watch for a mismatch that points to an unaccepted value. Recheck the configuration if the speedometer still reflects the old tire size. A trained technician should handle any step that involves writing module data.
Tire Size Scanner Questions
Can an Autel scanner change tire size on any vehicle?
An Autel scanner can change tire size only on vehicles whose modules accept a configuration write through the tool. Coverage depends on the scanner model, its software version and the vehicle platform. Some vehicles need a manufacturer-level function or a dealer tool instead. Check the tool menu for your exact model before starting.
Does changing tire size with a scanner fix the speedometer?
Changing tire size with a scanner corrects the speedometer only when the new dimension is written into the module that calculates vehicle speed. That module uses the stored tire size to convert wheel rotation into road speed. If a different module holds the value, the reading stays wrong. Verify the calibration after the write.
What do I need before changing the tire size?
Before changing the tire size, note the exact new dimension from the tire sidewall and confirm the vehicle accepts it. Connect a charged Autel scanner with current software for that vehicle. Keep the ignition in the state the tool requests during the write. A trained technician should perform the configuration change if you are unsure of the procedure.
What happens if the vehicle configuration stays on the old size?
A vehicle configuration left on the old size makes modules work from the wrong tire dimension. Wheel speed, speedometer readings and related warnings can disagree with the real tires. The scanner may also show fault codes tied to the mismatch. Rewriting the correct size resolves the configuration error.