How to Change Tire Size on an Edge CTS3

Learn how to change tire size on an Edge CTS3, where the tire size setting lives, how tire diameter feeds speedometer calibration, and what to verify.

3 min read1 viewsHow to Change Tire Size on an Edge CTS3
— · 0 votes
Contents
  1. Find the tire size menu
  2. Enter the tire diameter correctly
  3. Save, then verify the change
  4. Questions about Edge CTS3 tire size
  5. How do I set tire size on an Edge CTS3?
  6. Does the Edge CTS3 need the tire diameter instead of the sidewall size?
  7. What happens to speedometer calibration if the tire size is wrong?
  8. Do I need a specialist to change tire size on an Edge CTS3?

Changing tire size on an Edge CTS3 means entering the new tire diameter in the device's tire size setting so speedometer calibration matches the tires now on the vehicle. The Edge CTS3 is an in-cab monitor and tuner, and its menu walks you through the size entry before you save and confirm the change.

Find the tire size menu

The tire size setting on an Edge CTS3 sits inside the device's settings menu, not on the main gauge screen. Use the touch screen to open settings, then look for the vehicle or calibration section where tire size is listed. Select the tire size entry and the device shows the current value stored for the vehicle.

Enter the tire diameter correctly

The Edge CTS3 asks for tire diameter rather than a sidewall code such as 275/65R18. Measure the mounted tire from the ground to the top of the tread, or convert the sidewall numbers to a diameter in the unit the device expects. Enter the figure the device requests and check the unit before you confirm it. A wrong unit makes the speedometer calibration wrong even when the number looks right.

Save, then verify the change

After you enter the tire diameter, save the setting so the Edge CTS3 writes it to the vehicle. Drive a short distance and compare the speedometer reading against a GPS reference to confirm the calibration matches. If the reading is off, recheck the diameter figure and the unit, then enter the value again. Some vehicles also need the change confirmed through the device's programming step.

Questions about Edge CTS3 tire size

How do I set tire size on an Edge CTS3?

You set tire size on an Edge CTS3 through the device settings menu, where a tire size setting accepts the tire diameter. Open settings on the touch screen, select the tire size entry, type the new diameter, and save it. Then verify the speedometer against a GPS reference before you rely on the reading.

Does the Edge CTS3 need the tire diameter instead of the sidewall size?

Yes, the Edge CTS3 tire size setting works from tire diameter, not the sidewall code printed on the tire. A size such as 275/65R18 must be converted to an overall diameter before entry. Measure the mounted tire or calculate the diameter from the sidewall numbers, and enter it in the unit the device shows.

What happens to speedometer calibration if the tire size is wrong?

Speedometer calibration drifts when the tire size stored in an Edge CTS3 does not match the tires on the vehicle. The speed reading and the distance the vehicle reports both shift from the true values. Recheck the tire diameter entry and the unit, then correct the setting and compare against a GPS reference.

Do I need a specialist to change tire size on an Edge CTS3?

A tire size change on an Edge CTS3 is a menu entry, but the device also programs vehicle settings, so a trained specialist should handle it if you are unsure. Incorrect programming can affect speed readings and other vehicle functions. Ask a qualified technician when the steps or the unit are unclear.

Latest articles