What Bolt Circle Diameter Is and What It Measures

Learn what bolt circle diameter means on a wheel, how PCD notation reads, and how to measure the lug hole circle on four, five, six or eight lug hubs.

9 min read1 viewsWhat Bolt Circle Diameter Is and What It Measures
— · 0 votes
Contents
  1. The imaginary circle through the lug hole centers
  2. PCD, BCD and other names for the same size
  3. How bolt pattern notation shows the diameter
  4. Why wheel and hub must match exactly
  5. Measuring bolt circle diameter on even lug counts
  6. Measuring five-lug wheels without a direct reading
  7. Lug spacing and the general formula
  8. Accuracy limits of measuring at home
  9. Bolt circle diameter questions answered
  10. What is bolt circle diameter on a wheel?
  11. Is PCD the same as bolt circle diameter?
  12. How do you measure a 5-lug bolt circle?
  13. Will a wheel fit if the bolt circle is slightly different?
  14. Does bolt circle diameter affect tire size?

Bolt circle diameter is the size of the imaginary circle through the centers of a wheel's lug holes. Also called PCD or pitch circle diameter, it tells you how widely the lug holes are spread. Together with the lug count, it forms the bolt pattern that a wheel must share with the hub.

  • Bolt circle diameter runs through the centers of the lug holes, not their edges.
  • PCD, BCD and pitch circle diameter all name the same measurement.
  • In notation like 5x114.3, the first number is lug count and the second is the diameter.
  • A wheel and its hub must share the same lug count and the same bolt circle diameter.
  • On five-lug wheels, a ruler laid across the hub cannot read the diameter directly.

The imaginary circle through the lug hole centers

Bolt circle diameter is the diameter of a circle drawn through the center of every lug hole. The circle is imaginary, since nothing on the wheel marks it. Some drawings label it the bolt hole center circle, since it passes through each hole's exact middle. Each stud or bolt sits on that circle at equal spacing around the hub center.

The bolt circle describes where the lug holes sit, not how large the holes are. A wheel with small holes and one with large holes can share the same bolt circle. Hole size depends on the thread and seat of the lug nut or bolt instead. Keeping these two ideas apart prevents confusion when you read a wheel specification.

Wheel bolt circle diameter is given in millimeters, sometimes with an inch equivalent beside it. Small differences matter, because two patterns can look identical to the eye. A gap of a millimeter or two changes whether studs line up with the holes. That is why many specifications carry a decimal, as in 114.3 millimeters.

PCD, BCD and other names for the same size

PCD, short for pitch circle diameter, is another name for bolt circle diameter. Wheel catalogs, hub drawings and forum posts may use either term for one measurement. The abbreviation BCD, for bolt circle diameter, appears in engineering and fastener documents as well. All three terms describe the same circle through the lug hole centers.

Lug pattern and bolt pattern are broader terms that bundle two numbers together. A bolt pattern gives the lug count plus the bolt circle diameter in one short code. Calling the diameter alone 'the bolt pattern' is loose usage that can mislead a buyer. Asking for both numbers removes doubt when you compare wheels.

Lug bolt circle diameter is a phrase for the same size on wheels held by bolts. Some cars thread lug bolts into the hub, while others use studs with lug nuts. The fastener style changes nothing about how the circle is defined or measured. Only the hole positions decide the diameter, whatever passes through them.

How bolt pattern notation shows the diameter

Bolt pattern notation writes the lug count first and the bolt circle diameter second. In 5x114.3, five lug holes sit on a circle 114.3 millimeters across. Some sources write the same pattern as 5x4.5, giving the diameter in inches. Both forms describe one pattern, so converting units is enough to compare them.

The x in bolt pattern notation is a separator, not an instruction to multiply. Read 5x114.3 as five lugs on a circle of 114.3 millimeters. Swapping the order or dropping the unit can make a listing hard to check. Checking the unit is worth a moment whenever a figure looks unfamiliar.

Inch and millimeter versions of a pattern are not always exact matches after conversion. For example, 4.5 inches equals 114.3 millimeters exactly, so those two forms agree. Other listings round their figures, which can hide a real difference of a millimeter or more. Comparing the millimeter value printed by the wheel maker avoids that rounding trap.

NotationLug countBolt circle diameter
4x1004100 mm
5x114.35114.3 mm (4.5 in)
5x1205120 mm
6x139.76139.7 mm (5.5 in)
8x165.18165.1 mm (6.5 in)

Why wheel and hub must match exactly

A wheel hub and a wheel must share the same bolt circle diameter to fit properly. When the circles match, each stud passes straight through its lug hole. The lug nut seat then presses evenly against the wheel at every position. Even clamping holds the wheel centered and flat against the hub face.

A wheel with a slightly different bolt circle may seem to bolt on with force. The studs then bend sideways, and the nuts seat off center in their tapered holes. Uneven clamping can loosen nuts, crack studs or let the wheel shift while driving. A mismatched wheel should not be mounted, even when the gap looks tiny.

Lug count must match as well, since a five-hole wheel cannot fit a four-stud hub. Center bore, the large hole in the middle of the wheel, is a separate check. Offset and lug seat shape also need to agree once the bolt pattern matches. Adapters and multi-pattern wheels exist, but choosing and fitting them calls for a trained tire specialist.

Measuring bolt circle diameter on even lug counts

Bolt circle diameter on four, six or eight lug wheels can be measured straight across. With an even lug count, every hole has a partner directly opposite it on the circle. Measure from the center of one hole to the center of the hole across from it. That center-to-center distance across the hub equals the bolt circle diameter.

Finding the exact center of a lug hole is easier with a trick that uses the edges. Measure from the inner edge of one hole to the outer edge of the opposite hole. The offset by one hole radius cancels out when the holes are the same size. The result matches the center-to-center reading without guessing where each center lies.

Studs on a hub follow the same rule as lug holes on a wheel. Measure from the outer edge of one stud to the inner edge of the opposite stud. Exposing the hub means lifting the vehicle, which calls for proper jack stands and firm ground. If you are unsure about lifting a car, leave that step to a trained technician.

Measuring five-lug wheels without a direct reading

Five-lug bolt circle diameter cannot be read straight across, because no hole sits directly opposite another. A ruler laid across the hub passes between two holes on the far side. Any direct measurement therefore comes out shorter than the true diameter. A small calculation or a bolt pattern gauge solves the problem.

Lug spacing, the distance between centers of two neighboring holes, unlocks the five-lug calculation. Multiply that spacing by 1.701 to get the bolt circle diameter. The factor comes from circle geometry and stays the same for every five-lug wheel. For example, a spacing of 67.2 millimeters gives a diameter of about 114.3 millimeters.

A bolt pattern gauge is a template with marked circles that sits over the studs or holes. Matching the holes to a printed circle gives the diameter without any arithmetic. Gauges help when telling apart close patterns, such as 5x114.3 and 5x115. Small differences like that are hard to separate with a ruler alone.

  • Count the lug holes to confirm there are five.
  • Pick two neighboring holes.
  • Measure from the left edge of one hole to the left edge of the next for a center-to-center value.
  • Multiply that spacing by 1.701.
  • Compare the result with the nearest listed bolt circle diameter.

Lug spacing and the general formula

Lug spacing and bolt circle diameter are linked by one formula for any lug count. Divide the center-to-center spacing of neighboring holes by the sine of 180 degrees over the lug count. The result is the diameter of the circle those holes sit on. A calculator with a sine function handles the arithmetic easily.

Each lug count has its own fixed multiplier for the spacing between neighboring holes. Four lugs use 1.414, five lugs use 1.701 and six lugs use exactly 2. Eight lugs use about 2.613, while three lugs use about 1.155. The multipliers let you check a straight-across reading on even counts as well.

Lug spacing alone is not a bolt pattern, and listings sometimes confuse the two. A spacing figure is always smaller than the bolt circle diameter on wheels with three or more lugs. A number that seems too small for a known pattern may be a spacing value. Labeling which number you measured keeps a parts search from going wrong.

Accuracy limits of measuring at home

Home measurement of bolt circle diameter is accurate enough to identify a pattern, but not to fit adapters. A ruler reads only to its smallest marks, and viewing angle adds a little error. Close patterns can differ by less than that, so a single reading may point to two candidates. Repeat each measurement on several hole pairs and compare the results.

Worn or damaged lug holes can shift readings, since elongated holes no longer mark a clean center. Corrosion around studs and paint in the holes can also hide the true edges. Clean the area gently before measuring, and treat a hole that looks oval as a warning sign. A wheel with stretched lug holes needs inspection by a tire specialist before any further use.

Owner's manuals, wheel stamps and the vehicle maker's data give the bolt pattern without measuring. Many wheels carry the pattern cast or stamped on the back of a spoke or near the hub. Matching your measurement to one of these sources confirms the number. Where sources disagree, a tire shop can check the hub with proper gauges.

Bolt circle diameter questions answered

What is bolt circle diameter on a wheel?

Bolt circle diameter is the diameter of the circle passing through the centers of a wheel's lug holes. The size appears in millimeters after the lug count, as in 5x114.3. Wheel and hub must share this figure for the studs to line up.

Is PCD the same as bolt circle diameter?

Yes, PCD or pitch circle diameter is the same measurement as bolt circle diameter. Both terms name the circle through the lug hole centers. The abbreviation BCD also refers to that same figure.

How do you measure a 5-lug bolt circle?

A 5-lug bolt circle is found by measuring the center-to-center spacing of two neighboring holes and multiplying it by 1.701. A direct reading across the hub does not work, since no hole sits opposite another. A bolt pattern gauge gives the answer without arithmetic.

Will a wheel fit if the bolt circle is slightly different?

No, a wheel with a slightly different bolt circle diameter does not fit correctly. The studs bend to reach the holes, and the lug nuts seat off center. Special floating-seat fasteners exist for close patterns, but only a trained tire specialist should judge and fit them.

Does bolt circle diameter affect tire size?

No, bolt circle diameter has nothing to do with tire size. Tire size on the sidewall describes width, the ratio of sidewall height to width, and rim diameter. The bolt circle concerns only how the wheel attaches to the hub.

Read next

Latest articles