Tire Load Range Weight Chart: Load Capacity by Load Range Letter

See what each tire load range letter means, from SL and XL to B through L, with ply ratings, inflation pressures and how to find weight per tire.

8 min read1 viewsTire Load Range Weight Chart: Load Capacity by Load Range Letter
— · 0 votes
Contents
  1. What a tire load range letter means
  2. Load range letter chart with ply rating and pressure
  3. SL and XL ratings on passenger tires
  4. Light truck tire load ranges C, D and E
  5. Commercial and semi truck tire load ranges
  6. Finding the load capacity per tire in pounds
  7. Matching load range to vehicle and passenger weight
  8. Tire load range questions
  9. What do SL and XL mean on a tire?
  10. Is load range E the same as 10 ply?
  11. How much weight can a load range D tire carry?
  12. Where can I get a tire load range chart PDF?
  13. Can I put a higher load range tire on my truck?
  14. What load range do semi truck tires use?

A tire load range letter rates the inflation pressure a tire can hold at its maximum load. Letters run from SL and XL on passenger tires to B through L on light and heavy truck tires. The actual weight per tire in pounds or kilograms comes from the load index and the tire size.

  • Load range letters map to old ply ratings, such as C for 6 ply and E for 10 ply.
  • A higher letter means a stronger casing that holds more pressure, not a fixed weight.
  • Read the exact load capacity per tire from the load index or the sidewall maximum load.
  • A tire carries its rated load only when inflated to the pressure listed for that load.
  • Replacement tires should match or exceed the load capacity on the vehicle tire placard.

What a tire load range letter means

A tire load range letter is a code for casing strength and the pressure the tire can hold. Higher letters belong to tires built to run at higher pressure and carry heavier loads. The letter sits on the sidewall, often after the words 'Load Range' or as 'LR'.

Ply rating is the older system that load range letters replaced on light truck and trailer tires. Early tires used layers of cotton cord, and more plies meant a stronger tire. Modern casings use steel and polyester cords with fewer layers. A 10 ply rating now means equal strength, not ten real layers of cord.

A load range letter does not give a weight by itself. Two load range E tires in different sizes can carry very different loads. The letter sets the pressure class, while the load index sets the pounds. A useful load capacity chart therefore lists the size next to each letter.

Load range letter chart with ply rating and pressure

The load range letter chart below links each letter to its ply rating and maximum inflation pressure. Passenger tires use SL or XL, while light truck and commercial tires use letters B through L. The pressures shown are the cold pressures at which a tire reaches its rated maximum load.

Cold inflation pressure means pressure measured before driving, when the tire is at ambient temperature. Driving warms the air inside, so a hot reading runs higher than the cold figure. Never let air out of a hot tire to match the chart value.

Heavy truck letters H, J and L have no single pressure across all sizes. For those tires, the sidewall marking gives the exact pressure for maximum load. Saving or printing this table gives a basic printable reference for the shop or garage.

Load rangePly ratingPressure for max loadTypical use
SLNot used35 to 36 psi (about 250 kPa)Passenger cars
XLNot used41 to 42 psi (about 290 kPa)Passenger cars, heavier SUVs
B435 psi (about 240 kPa)Light trailers, older LT tires
C650 psi (about 350 kPa)Light trucks, trailers
D865 psi (about 450 kPa)Light trucks, trailers
E1080 psi (about 550 kPa)Heavy pickups, vans, trailers
F1295 psi (about 655 kPa)Heavy LT, commercial vans
G14110 psi (about 760 kPa) on LT sizesHeavy LT, medium trucks
H16Varies by sizeMedium and heavy trucks
J18Varies by sizeHeavy trucks, buses
L20Varies by sizeHeavy trucks, special service

SL and XL ratings on passenger tires

Passenger tires use SL, standard load, and XL, extra load, instead of load range letters. An SL tire reaches its maximum load at about 35 or 36 psi. An XL tire of the same size carries more weight at about 41 or 42 psi.

The XL marking may also appear as 'Reinforced' on some metric passenger tires. An SL tire carries no extra marking, since standard load is the default. The load index next to the size still gives the exact weight per tire.

An XL tire run at SL pressure carries about the same load as an SL tire. The extra capacity appears only when the XL tire is inflated to its higher pressure. The tire placard on the door jamb gives the starting pressure for either type.

Light truck tire load ranges C, D and E

Light truck tires, marked LT before the size, carry load range letters such as C, D and E. Load range C equals a 6 ply rating with a 50 psi maximum. Load range D equals 8 ply at 65 psi, and E equals 10 ply at 80 psi.

Light truck tires often show two load index numbers, such as 121/118, after the size. The first number is the load index for a tire mounted alone on the axle end. The second, lower number applies when two tires run side by side as duals.

A higher load range on a light truck rides stiffer at the pressures it needs for full load. Running it at low pressure lowers its capacity to that of the lower letter. Choose the letter that matches the axle weights, not simply the highest one available.

Commercial and semi truck tire load ranges

Commercial truck tires for medium and heavy trucks use load ranges F through L. Semi truck tires on 22.5 inch or 24.5 inch rims fall in this group. Each wheel position on a tractor or trailer may call for load range G, H or J.

Heavy truck load capacity by load range depends strongly on tire size and wheel position. Commercial tires show a dual load index, such as 144/142, for single and dual mounting. A load index of 144 equals 2,800 kg, or 6,175 lb, per tire in single use.

The tire maker's load and inflation table lists heavy truck loads at each pressure step. Reading that table by size and position gives the correct cold pressure for the load. Mounting and inflating these tires calls for a trained commercial tire technician. Multi-piece rims and high pressures can cause serious injury during mounting or inflation.

Finding the load capacity per tire in pounds

The load capacity per tire comes from the load index, a number printed after the tire size. In a marking like 265/70R17 121/118S, the 121 is the single load index. Load index 121 equals 1,450 kg, or 3,197 lb, per tire.

Every tire sidewall states the maximum load in pounds and kilograms near the bead. That figure applies only at the maximum pressure printed beside it. At lower pressure, the tire carries less, and the maker's table gives the reduced value.

The load index table below converts several index numbers into kg and lb per tire. The same index means the same weight on any tire, whatever its load range letter. Multiply the single figure by the number of tires to get total rated capacity.

Load indexkg per tirelb per tire
916151,356
1008001,764
1101,0602,337
1161,2502,756
1211,4503,197
1261,7003,748
1442,8006,175

Matching load range to vehicle and passenger weight

The right load range for a vehicle depends on the total weight it carries, including passengers. Passenger weight, cargo and trailer tongue weight all add to the load on each axle. Tongue weight is the downward force a trailer coupler puts on the hitch. The vehicle tire placard lists the original tire size, pressure and load rating.

Gross axle weight rating, or GAWR, is the maximum weight one axle may carry. Divide the GAWR by the number of tires on that axle to find the needed load per tire. Each tire's load capacity at its running pressure should meet or exceed that figure.

A scale ticket from a loaded vehicle gives real axle weights to compare with tire ratings. The front axle and the rear axle often carry different loads on a vehicle. Check each axle against the tire ratings on its own. Tires with less load capacity than the original fitment should not go on the vehicle.

Tire load range questions

What do SL and XL mean on a tire?

SL means standard load and XL means extra load on passenger tires. Neither uses a load range letter, so their weight capacity comes from the load index. An XL tire reaches its higher rated load at about 41 or 42 psi.

Is load range E the same as 10 ply?

Yes, load range E corresponds to a 10 ply rating on light truck tires. The rating describes casing strength, not the true number of cord layers inside. A load range E tire reaches its maximum load at about 80 psi cold.

How much weight can a load range D tire carry?

A load range D tire has no single weight figure, because its capacity depends on size. The load index and sidewall maximum load give the pounds for that exact tire. Load range D only tells you the tire reaches that load at about 65 psi.

Where can I get a tire load range chart PDF?

A tire load range chart PDF can be made by saving or printing the tables here. Tire makers also publish load and inflation tables in their product data books. Those tables give the load at each pressure step for a specific size.

Can I put a higher load range tire on my truck?

Yes, a higher load range tire can go on a truck if the size matches. Ride may feel firmer at the pressures the tire needs to carry its full load. Check that the wheel is rated for the higher pressure before inflating to it.

What load range do semi truck tires use?

Semi truck tires use load ranges such as G, H or J, with F or L in some sizes. The exact load per tire depends on size and on single or dual mounting. A trained commercial tire technician should handle mounting and inflation of these tires.

Read next

Latest articles