Units Used in Tire Size Numbers
Tire size units explained: which numbers are metric, which are inches, and how to read section width, aspect ratio, rim diameter and flotation sizes.
Contents
- Metric numbers in a tire size
- How inches appear in tire sizes
- Reading sidewall numbers by position
- Questions About Tire Size Units
- What unit are tires measured in?
- What units do tire sizes use for the first number?
- Is the wheel diameter in a tire size given in inches or millimeters?
- What does the aspect ratio number in a tire size mean?
Tire size numbers use more than one unit of measurement, and the unit is not written on the sidewall. A tire size unit of measurement depends on where the number sits in the size string: width and sidewall figures are metric on an ISO metric tire, while rim diameter and flotation sizes are stated in inches.
Metric numbers in a tire size
ISO metric tire sizing gives section width in millimeters, and the aspect ratio is a percentage with no unit at all. A size such as 225/45R17 states a 225 mm section width and a sidewall height of 45 percent of that width. Rim diameter comes after the letter R and is measured in inches, not millimeters. Mixing the two systems inside one size string is normal, so read each number by its position.
How inches appear in tire sizes
Inch measurements in tire sizing cover rim diameter and the outside dimensions of flotation and LT metric sizes. A flotation size such as 31x10.50R15 lists an overall diameter of 31 inches, a section width of 10.50 inches and a 15 inch rim. The numbers before the R are separated by an x to show two inch dimensions plus the rim. These sizes suit light truck and off-road use, where overall diameter matters more than a metric width.
Reading sidewall numbers by position
The tire size format places each figure in a fixed order, and the unit follows that order rather than a label. Section width opens a metric size in millimeters, then the aspect ratio, then the construction letter, then the rim diameter in inches. Load index and speed rating sit after the rim figure and carry no length unit at all. When the first number ends with a decimal point, the size is usually an inch-based flotation size instead.
Questions About Tire Size Units
What unit are tires measured in?
Tires are measured in millimeters for section width and in inches for rim diameter on a metric size. The sidewall height is given as an aspect ratio, which is a percentage of the section width with no unit. Flotation sizes state overall diameter and width in inches instead.
What units do tire sizes use for the first number?
The first number of a metric tire size uses millimeters and describes section width, the widest part of the inflated tire. A figure of 205 means 205 mm across the sidewalls. If that first number has a decimal point, such as 10.50, the size is an inch-based flotation size.
Is the wheel diameter in a tire size given in inches or millimeters?
Wheel diameter in a tire size is given in inches, even when the rest of the size is metric. The number after the construction letter R, such as 16 or 17, is the rim diameter in inches. That rim figure must match the wheel the tire is mounted on.
What does the aspect ratio number in a tire size mean?
The aspect ratio is a percentage of the section width and has no unit of its own. On a 225/45R17 tire, the 45 means the sidewall height is 45 percent of the 225 mm width. A lower aspect ratio gives a shorter sidewall on the same width.