Trailer Wheel Size Guide
Read trailer wheel sizes plainly: diameter, rim width, bolt pattern, offset, hub bore and load rating, and learn how each number decides whether a wheel fits.
Contents
- Diameter and rim width work together
- Bolt pattern and hub bore center the wheel
- Offset and load rating decide the fit
- Trailer wheel size questions
- What does a trailer wheel size guide cover?
- How do I match a bolt pattern to my trailer hub?
- Does wheel offset matter on a trailer?
- What wheel load rating does a trailer need?
A trailer wheel size guide explains the measurements that decide whether a wheel fits your trailer and carries its load. Each value describes one part of the wheel, and a wheel suits a trailer only when all of them match.
Diameter and rim width work together
Trailer wheel diameter and rim width are the two numbers that set what a tire can do. The diameter must match the tire bead seat, and the rim width must sit within the range the tire maker lists. A rim that is too narrow or too wide changes how the tire sits and wears, so check both figures together.
Bolt pattern and hub bore center the wheel
A bolt pattern describes how many lug holes a wheel has and how far apart they sit. Lug nut count alone is not enough, because two wheels with the same count can have different spacing. Hub bore is the center hole that centers the wheel on the hub, and a bore that does not match needs a trained specialist to assess.
Offset and load rating decide the fit
Wheel offset sets how far the mounting face sits from the wheel center, and it decides clearance to the frame and fender. A wheel load rating states the weight one wheel is built to carry, and the trailer axle load sets the minimum you need. Fit a wheel rated below the load on its share of the axle and the wheel can fail under towing.
Trailer wheel size questions
What does a trailer wheel size guide cover?
A trailer wheel size guide covers the measurements that decide fitment and load capacity. It explains diameter, rim width, bolt pattern, offset, hub bore and wheel load rating. Read each value from the wheel or hub rather than guessing from the tire alone.
How do I match a bolt pattern to my trailer hub?
Bolt pattern matching compares the lug nut count and the spacing between the holes on the wheel and the hub. Count the studs on the hub and measure the spacing across the stud circle. A wheel with the same count but different spacing will not seat correctly.
Does wheel offset matter on a trailer?
Wheel offset matters on a trailer because it sets how far the tire sits from the frame and fender. Too much change in either direction can cause rubbing or reduced clearance. Keep the offset close to the original value unless a trained specialist confirms the change.
What wheel load rating does a trailer need?
Trailer wheel load rating must meet or exceed the weight each wheel carries on its axle. Divide the loaded axle weight across the wheels on that axle, then compare that figure with the rating on the wheel. Choose a wheel rated for at least that load, and have a specialist confirm the axle figures.