Bias Ply Tire Dimensions Chart
Learn how a bias ply tire dimensions chart works, what section width, overall diameter and rim diameter mean, and how to read a sidewall marking correctly.
Contents
- What a bias ply tire dimensions chart shows
- Decoding the bias ply sidewall marking
- Section width and what it measures
- Overall diameter and ride height
- Matching rim diameter to the wheel
- Using a tire size lookup table
- Reading a chart for classic and vintage cars
- Checking a chart size against the real tire
- Bias Ply Tire Size Questions
- What does a bias ply tire chart list?
- How do I read bias ply tire dimensions from the sidewall?
- Is section width the same as tread width?
- Can I fit a tire with a different overall diameter?
- Does the rim diameter on the tire have to match the wheel?
- Why does my measured tire differ from the chart?
A bias ply tire dimensions chart lists sizes by rim diameter, section width and overall diameter, so you can match a tire to a wheel and a vehicle. The numbers on the sidewall give you the same three values in a set order. Reading that marking is how you find the right row in any lookup table.
- A bias ply size is read as section width, rim diameter, then overall diameter in inches.
- Section width is measured at the widest part of the inflated tire, not at the tread.
- Overall diameter grows with section height and rim diameter, so it sets the tire's rolling size.
- The rim diameter on the tire must match the wheel diameter exactly.
- A size lookup table converts a sidewall marking into the dimensions a chart lists.
What a bias ply tire dimensions chart shows
A bias ply tire dimensions chart is a table that lists tire sizes against their geometric measurements. Each row pairs one size code with its section width, rim diameter and overall diameter. The chart is a reference for comparing tires without mounting them on a wheel.
Bias ply construction uses crossed cord layers under the tread, which gives the tire its size behavior. The dimensions in a chart describe the inflated tire at its rated size. These figures let you compare a replacement tire with the one already on the car.
The chart does not cover load, speed or tread design, because those values come from other markings. A chart answers the size question only. Treat it as a measuring aid, not a full specification sheet.
- Section width in inches
- Rim diameter in inches
- Overall diameter in inches
- Size code as printed on the sidewall
Decoding the bias ply sidewall marking
A bias ply size is written as three numbers in a fixed order, and each one feeds a column of the chart. The first number is section width, the second is rim diameter and the third is overall diameter. A marking such as 7.50-16 therefore reads across in that sequence.
The sidewall marking carries the size code, which is the key for a tire size lookup table. Match the code exactly rather than rounding it to a nearby size. A leading letter or extra digits can mark a different construction or service type.
Compare the marking with the chart before you order or mount anything. A mismatch between the tire's stated rim diameter and the wheel is a fitment error, not a chart error. Read the code from the tire itself, not from a memory of the old one.
Section width and what it measures
Section width is the widest measurement of the inflated tire across its sidewalls, and it is the first dimension in a size code. It is not the tread width and not the width of the wheel. A chart lists section width in inches for bias ply sizes.
The same nominal section width can measure slightly differently depending on the rim width it sits on. A wider rim spreads the sidewalls and changes the measured figure. The chart value assumes the tire is mounted on its specified rim width.
Check clearance at the widest point of the tire, not just at the tread. Suspension parts, inner fenders and steering components sit close to the sidewall bulge. Section width is the number that tells you whether the tire has room.
Overall diameter and ride height
Overall diameter is the distance across the inflated tire from tread to tread, and it sets the ride height and the rolling size. A taller overall diameter raises the vehicle and changes the distance covered per wheel turn. The chart lists this figure so you can compare a replacement with the original.
Overall diameter follows from rim diameter plus twice the section height, so a change in either value moves the total. Fitting a taller tire can affect speedometer readings, gearing and clearance to the body. Check those effects before you change the size away from the original.
Measure a mounted tire at the tread with the vehicle's weight on it to see the loaded figure. The chart value is the unloaded nominal size, so a small difference is expected. Use the chart for comparison and the tape for confirmation.
| Dimension | What it sets | Where to find it |
|---|---|---|
| Section width | Sidewall clearance | First number in the size code |
| Rim diameter | Wheel match | Second number in the size code |
| Overall diameter | Ride height and gearing | Third number in the size code |
Matching rim diameter to the wheel
Rim diameter must match the wheel diameter exactly, and no chart value can correct a mismatch. A tire marked for one rim size will not seat correctly on a wheel of another size. Confirm the wheel diameter from the wheel itself before you rely on the chart.
Wheel width also matters, because a tire has a range of rim widths it can sit on safely. A chart may list a recommended rim width alongside the size, and that figure guides the choice. Stay within the range the tire maker specifies for safe seating.
Mounting a tire on the wrong rim can damage the tire, the wheel or both, and it can fail under load. Leave mounting and balancing to a trained tire technician with the right equipment. The chart helps you choose the size, not perform the install.
Using a tire size lookup table
A tire size lookup table converts the code on the sidewall into the dimensions you need to compare. Start at the code, find the matching row and read across to section width, rim diameter and overall diameter. The table removes the need to guess which number means what.
Write down the old size and the new size side by side before deciding. Compare each of the three dimensions rather than looking at the size code alone. A small change in section width or overall diameter can matter for clearance and gearing.
Keep the original size in the table as a baseline when you shop for a replacement. If a substitute size appears close, check both figures against the vehicle and the wheel. The table shows the numbers, and the fitment check stays with you.
Reading a chart for classic and vintage cars
Bias ply sizes on classic and vintage cars often follow older marking styles, and a dimensions chart keeps those codes readable. Some markings use a letter prefix or a different digit count from modern sizes. The chart translates the older code into the same three dimensions.
Original wheels on older vehicles can be narrow, which limits the section width a tire can carry well. Check the wheel width against the tire's range before you pick a wider size. A chart row that looks close on diameter can still be wrong for the rim.
Replacement availability changes over time, so compare dimensions rather than assuming a code is still made. Match the chart figures to the wheel and the vehicle's clearance. Where the change is significant, ask a tire technician to confirm the fitment.
Checking a chart size against the real tire
A chart gives nominal dimensions, and a mounted tire can measure a little differently in practice. Measure the section width and overall diameter on the inflated tire for a real comparison. Inflation pressure and rim width both affect the result, so measure in the same conditions.
Measure overall diameter across the tread at the center of the tire, with the vehicle's weight on the wheel. Measure section width at the widest point of the sidewall, not at the tread edge. Record both figures next to the chart values to see how close they sit.
If the measured figures sit far from the chart, check that you read the correct size code and the correct row. Also confirm the tire is inflated to its rated pressure for the vehicle. A large gap points to a wrong code or a wrong chart row, not a faulty tire.
Bias Ply Tire Size Questions
What does a bias ply tire chart list?
A bias ply tire chart lists each size code with its section width, rim diameter and overall diameter. These three dimensions describe the inflated tire's geometry. The chart lets you compare sizes without mounting them.
How do I read bias ply tire dimensions from the sidewall?
Bias ply tire dimensions are read in order as section width, rim diameter and overall diameter. A marking such as 7.50-16 gives those three values in sequence. Match the full code to the chart row rather than rounding it.
Is section width the same as tread width?
No, section width is not the tread width. Section width measures the widest point across the inflated sidewalls, while tread width measures the rubber that touches the road. The chart lists section width for fitment and clearance checks.
Can I fit a tire with a different overall diameter?
Yes, a tire with a different overall diameter can fit if clearance and the wheel allow it, but the change affects ride height and gearing. A taller tire raises the vehicle and alters speedometer readings. Compare both figures before you commit to the change.
Does the rim diameter on the tire have to match the wheel?
Yes, the rim diameter on the tire must match the wheel diameter exactly. A tire will not seat correctly on a wheel of a different diameter. Confirm the wheel size before you mount anything, and let a trained technician do the mounting.
Why does my measured tire differ from the chart?
A measured tire can differ from the chart because chart figures are nominal and depend on rim width and inflation pressure. Measure the inflated tire at the rated pressure for a fair comparison. A large difference points to a wrong size code or a wrong chart row.