Trailer Tire Pressure When Towing
Learn how to set trailer tire pressure when towing, why the placard and load-inflation tables matter, and how a heavy trailer load changes the cold inflation target.
Contents
- Start with the trailer tire placard
- Understand cold inflation pressure
- Match pressure to the trailer axle loads
- Set pressure for a heavy trailer load
- Read ST tires and the load range
- Check pressure before every tow
- Know when a specialist should step in
- Trailer tire pressure questions
- What tire pressure should I run when towing a trailer?
- How does a heavy trailer load change tire pressure?
- Should I check trailer tire pressure hot or cold?
- Can I inflate trailer tires to the maximum on the sidewall?
- What does load range mean on trailer tires?
- Where do I find the trailer tire placard?
Trailer tire pressure when towing should be set to the cold inflation pressure that matches the load each tire carries, using the trailer tire placard and the tire load-inflation table. A heavy trailer load can call for more pressure than an empty trailer, but never more than the maximum printed on the tire sidewall. Check and set the pressure before the trip, while the tires are cold.
- Set trailer tire pressure cold, before towing, when the tires have not built heat.
- Use the trailer tire placard first and the tire load-inflation table to match the real axle load.
- A heavy trailer load may need a higher cold pressure than a light one.
- Never exceed the maximum cold pressure molded on the tire sidewall.
- ST tires are built for trailer service and carry their load rating at a stated pressure.
Start with the trailer tire placard
The trailer tire placard is the manufacturer's statement of the correct cold inflation pressure for the trailer as built. It lists the tire size, the load range and the pressure for the original tires at their rated load. Start there, because the placard accounts for the trailer axle loads the frame and suspension were designed to carry.
The placard pressure is a target for a trailer loaded to its rated capacity, not a number to raise at will. If you fit a different tire size or load range than the placard names, the placard pressure may no longer match the tire. In that case, work from the new tire's load-inflation table and the actual load on each axle.
Read the placard on the frame or tongue, not on the tire, and keep it visible. A missing or unreadable placard leaves you without the manufacturer's figure, so consult the trailer maker or a tire specialist. Do not guess a pressure from the size alone, because two tires of one size can carry different loads at the same pressure.
Understand cold inflation pressure
Cold inflation pressure is the pressure in a tire that has not been driven and has cooled to ambient temperature. Tire makers rate load capacity at this cold figure, so all pressure checks and fills belong before the trailer moves. Heat from towing raises pressure, and that rise is normal, not a sign of overinflation.
Setting pressure on a warm tire gives a false high reading and leaves the tire underinflated once it cools. If you must add air on the road, note the warm reading and recheck cold at the next stop. A tire that reads low cold after a short tow may have a slow leak rather than a pressure problem.
Cold pressure depends on ambient temperature, and a cold morning can drop the reading noticeably. Check trailer tire pressure at the start of a trip in the season you travel, not from a reading taken weeks earlier. Adjust only to the cold target and let the towing heat take care of itself.
Match pressure to the trailer axle loads
Each tire carries part of the trailer axle loads, and the pressure must support that share. Load the trailer as you intend to tow, then weigh each axle or the whole trailer at a scale to learn the real figure. A tire load-inflation table then converts that load into the minimum cold pressure for the tire.
Trailer axle loads shift with how cargo sits, so a load over one axle can exceed the other. Weighing each axle separately shows where the pressure demand is highest. Set every tire on an axle to support the heavier side, so no single tire runs below its load's requirement.
Do not split the difference between an empty and a loaded trailer when the trailer runs loaded. The pressure that supports the heavy trailer load is the one that protects the tires. When the trailer runs empty for long stretches, the placard or table figure for that lighter load is the reference.
| Trailer condition | Pressure reference |
|---|---|
| Empty or lightly loaded | Placard pressure or table figure for the lighter axle load |
| Loaded to rated capacity | Placard pressure for the original tires |
| Heavy trailer load near the tire limit | Table figure for the measured axle load, up to the sidewall maximum |
| Different tire than the placard names | Load-inflation table for the new tire and the measured load |
Set pressure for a heavy trailer load
A heavy trailer load raises the load each tire carries, so the cold inflation pressure must rise to match it. Trailer tire pressure for heavy load work starts with the measured axle load, not with a habit or a number from a past trip. The tire load-inflation table gives the minimum cold pressure for that load at the tire's rated speed.
The sidewall maximum cold pressure is the ceiling, and no load justifies going above it. If the table calls for more pressure than the sidewall allows, the tire is too small or the load is too high for it. Move to a higher load range or a larger tire rather than overinflating what you have.
Underinflation hurts more under load, because a soft tire flexes further and builds heat. A tire run below its required pressure for a heavy trailer load can fail on the road. Keep a gauge in the tow vehicle and check each trailer tire before a loaded trip.
Read ST tires and the load range
ST tires are special trailer tires, built with a stiffer sidewall to handle trailer service and the turning loads a trailer imposes. The ST marking on the sidewall tells you the tire is intended for trailer axles rather than a driven or steering position. Match the load range to the trailer's rated capacity when you replace tires.
Trailer load range letters, such as C, D or E, describe the tire's load-carrying capacity at a stated pressure. A higher load range carries more load at a higher cold pressure, and it does not mean you inflate to that pressure when the trailer is light. Use the load-inflation table for your load range and the measured load.
Sidewall markings give the maximum load and the maximum cold pressure for that tire. Treat the maximum as a limit, not a target, unless the trailer really runs at that load. A tire technician can confirm the load range and pressure that suits your trailer and its cargo.
Check pressure before every tow
Trailer tire pressure deserves a check before every tow, because trailer tires sit for long periods and lose air slowly. A tire that held pressure last month can be low today without any visible damage. Walk around the trailer with a gauge and read all tires, including the spare.
Check the valve stems and caps as part of the same walk-around, since a missing cap lets dirt into the valve. Look for bulges, cracks or foreign objects in the tread and sidewall. A tire with a bulge or a deep cut should come off before the trailer moves, not after.
Set the spare to the same cold pressure as the tires in service, so it is ready when needed. After a long stop, feel the trailer tires for a tire that runs much hotter than the others. A hot tire paired with a low reading points to a problem that needs attention before the next leg.
Know when a specialist should step in
Some trailer pressure questions need a trained tire technician rather than a roadside guess. A trailer that has no placard, an unusual tire size or a load near the tire limit all call for a professional check. The same applies when a tire shows uneven wear or repeated pressure loss.
Weighing a loaded trailer at a scale gives the numbers a technician needs to set pressure correctly. Bring the trailer loaded, along with the tire size and load range from the sidewall. A specialist can then compare the trailer axle loads with the load-inflation table and confirm a safe cold pressure.
Never exceed the sidewall maximum to chase a load, and never run a tire soft to soften the ride. Both choices can damage the tire and the trailer. Where the correct figure is unclear, keep the trailer parked until someone qualified confirms it.
Trailer tire pressure questions
What tire pressure should I run when towing a trailer?
Run the cold inflation pressure that matches the load each trailer tire carries. Start with the trailer tire placard and confirm the figure with the tire load-inflation table for the measured axle load. A loaded trailer may need more pressure than an empty one, but never above the sidewall maximum.
How does a heavy trailer load change tire pressure?
A heavy trailer load raises the load on each tire, so the cold pressure needed to carry it goes up. Use the load-inflation table to find the minimum pressure for the measured axle load. Stop at the maximum cold pressure molded on the tire sidewall and change tires if the load needs more.
Should I check trailer tire pressure hot or cold?
Check trailer tire pressure cold, before towing, when the tires have cooled to ambient temperature. Warm tires read higher because towing heat raises pressure, and that rise is normal. A warm reading cannot tell you whether the cold pressure is right, so recheck cold at the next stop.
Can I inflate trailer tires to the maximum on the sidewall?
The sidewall maximum is a limit, not a target for every trip. Inflate to the pressure the load-inflation table gives for the actual trailer load, up to that maximum. Running at the maximum with a light load gives a harsher ride without adding load capacity.
What does load range mean on trailer tires?
Load range on a trailer tire describes its load-carrying capacity at a stated cold pressure. A higher load range, such as E over D, carries more load at a higher pressure. Match the load range to the trailer's rated capacity and set pressure from the table for your actual load.
Where do I find the trailer tire placard?
The trailer tire placard sits on the trailer frame or tongue, and it lists the tire size, load range and cold pressure. Read it before you set pressure, since it reflects the trailer as built. If the placard is missing, ask the trailer maker or a tire specialist for the correct figure.