Toyota Tacoma Spare Tire Speed Rating
Find the speed rating on your Toyota Tacoma spare tire, read its sidewall code, and learn how size and load rating affect driving on the spare.
Contents
- The Tacoma spare is generally a full-size tire
- How to read the spare tire sidewall code
- What the speed rating letters mean
- Factory spare tire speed rating versus road tires
- Tacoma spare tire size and load rating
- Driving on a Tacoma spare after a flat
- Checking the under-bed spare before you need it
- Tacoma spare tire speed rating questions
- What speed rating is the spare tire on a Toyota Tacoma?
- Is the Tacoma spare tire full size?
- How fast can I drive on my Tacoma spare tire?
- Can I use the Tacoma spare tire permanently?
- Does the spare need the same load rating as the other tires?
The Toyota Tacoma spare tire speed rating is the single letter at the end of the size code on the spare's sidewall. Tacomas generally carry a full-size spare under the bed rather than a compact temporary tire. That spare can still differ from the road tires in brand, size or rating, so the code printed on your spare gives the only sure answer.
- The speed rating is the single letter after the load index on the spare's sidewall.
- A Tacoma spare is generally full size, but it may not match the road tires.
- Your truck's safe top speed drops to the rating of the lowest-rated tire installed.
- A compact temporary spare carries its own lower speed limit printed on the sidewall.
- Check the under-bed spare's pressure and condition before you need it.
The Tacoma spare is generally a full-size tire
The Toyota Tacoma spare tire is generally a full-size tire carried under the rear of the bed. The Tacoma layout places a full-size spare there rather than a compact temporary tire. The spare hangs from a cable winch beneath the frame, behind the rear axle. That location keeps it out of the cab but exposes it to road spray and dirt.
A full-size Tacoma spare is not always a matching spare. Depending on trim, the spare may sit on a steel wheel while the road tires sit on alloys. The spare tire can also differ from the other four in brand, tread pattern or speed rating. A previous owner may have swapped the spare for whatever tire was on hand.
The Tacoma spare wheel specification should match the hub in bolt pattern, center bore and offset. Offset is the distance from the wheel's centerline to its mounting face. A spare wheel that came with the truck meets those needs by design. A wheel bought used or taken from another vehicle needs a tire shop to confirm its fit.
How to read the spare tire sidewall code
The spare tire sidewall code lists size, construction, load index and speed rating in one string. A sample code reads 265/70R16 112S, though your spare may show different figures. The first number, 265, is the section width in millimeters. The 70 is the aspect ratio, the sidewall height as a percentage of width.
The letter R in a tire size means radial construction, and 16 is the rim diameter in inches. The two or three digits after the rim size form the load index. The single letter that follows the load index is the speed rating. In the sample code, 112 is the load index and S is the speed rating.
Light truck tires on a Tacoma may begin with LT and show two load numbers separated by a slash. The first of those numbers applies to single-wheel use, which is the setup on a Tacoma. On an under-bed spare, dirt and grime can hide the molded markings. Wipe the sidewall clean before reading the code.
What the speed rating letters mean
A tire speed rating letter shows the highest sustained speed the tire can handle at its rated load. Tire makers assign the letter through standardized laboratory testing at correct inflation. Underinflation, overloading, damage and tread wear all reduce the speed a tire can take.
Speed rating letters do not follow plain alphabetical order across the whole scale. The letter H sits between T and V, a holdover from an older rating system. Light truck and all-terrain tires fitted to a Tacoma may carry lower letters than car tires.
The speed rating on a full-size Tacoma spare is a ceiling, not a target speed. A spare that has hung unused under the bed may have lost pressure or aged. Stay well below the rated speed until the tire's pressure and condition are confirmed.
| Speed rating | Maximum speed (mph) | Maximum speed (km/h) |
|---|---|---|
| Q | 99 | 160 |
| R | 106 | 170 |
| S | 112 | 180 |
| T | 118 | 190 |
| H | 130 | 210 |
| V | 149 | 240 |
Factory spare tire speed rating versus road tires
The factory spare tire speed rating on a Tacoma may or may not match the road tires. The owner's manual and the tire placard on the driver's door jamb describe the original tires. Comparing the spare's sidewall code against those sources shows whether it meets the original specification.
Mixing tires with different speed ratings limits the truck to the lowest rating installed. A spare rated S on a truck with T-rated road tires caps your speed at the S limit. Different tires also grip and steer differently, which affects handling during emergency moves.
Tacoma owners who fit larger all-terrain or mud tires sometimes leave the original spare in place. A mismatched spare then differs in overall diameter, tread and possibly speed rating. A noticeable diameter difference can affect four-wheel drive, traction control and speedometer readings. Check the owner's manual before engaging four-wheel drive with a mismatched spare.
Tacoma spare tire size and load rating
The Toyota Tacoma spare tire size should match the road tires as closely as possible. Factory sizes vary by model year and trim, so read the door placard for your truck's original size. Rim diameter, tire width and overall diameter all matter once the spare goes on.
The Tacoma spare load rating, shown by the load index, must cover the weight on that corner. A load index chart converts the number into kilograms or pounds per tire. A spare with a lower load index than the road tires limits how much the truck can carry. Avoid towing or hauling heavy cargo on a spare rated below the original tires.
Passenger tires marked P and light truck tires marked LT carry load differently at the same size. LT tires reach their rated load at higher inflation pressures than passenger tires. Inflate the spare to the pressure on the door placard or the tire maker's load chart.
Driving on a Tacoma spare after a flat
A full-size Tacoma spare can work as a regular tire when it matches the others and is sound. Matching means the same size, a similar tread depth and a load index at least equal to the originals. A speed rating at or above the road tires keeps the truck's speed capability unchanged. Any shortfall in those areas makes the spare a short-term fix until the flat is repaired.
A compact temporary spare follows stricter rules than a full-size tire. Temporary spares with a T at the start of the size code often carry a 50 mph (80 km/h) limit. The exact limit appears on the sidewall or a label on the wheel. If a previous owner fitted a compact spare to your Tacoma, follow the limit printed on it.
Spare tire pressure should be checked as soon as possible after mounting. Drive gently at first and watch for vibration, pulling or unusual noise. Lug nuts need tightening to the torque figure in the owner's manual, ideally with a torque wrench. A tire shop should inspect the flat road tire and decide whether it can be repaired.
Checking the under-bed spare before you need it
An under-bed Tacoma spare needs regular checks because it sits out of sight and exposed to weather. Pressure drops slowly over time, and road salt can corrode the winch cable. A spare that cannot be lowered offers no help at the roadside.
Lowering the Tacoma spare uses the jack handle and extension fed through an access hole at the rear of the truck. Turning the winch lowers the tire on its cable until you can unhook it. Practicing once at home makes the steps familiar before a roadside emergency.
Tire rubber ages even when a spare is never used, so check the manufacturing date code on the sidewall. Cracks in the sidewall or tread grooves signal that the spare needs replacing. A tire professional can judge whether an older spare is fit for road use.
- Read the sidewall code and note the speed rating letter
- Check pressure against the door placard or tire chart
- Inspect for cracks, bulges and dry rot
- Find the manufacturing date code on the sidewall
- Lower and raise the spare to test the winch
- Confirm the jack, handle and lug wrench are on board
Tacoma spare tire speed rating questions
What speed rating is the spare tire on a Toyota Tacoma?
The Toyota Tacoma spare tire speed rating depends on the trim and the tire fitted, so read the letter after the load index on its sidewall. The Tacoma generally carries a full-size spare, which may share the road tires' rating or sit lower. The door placard and owner's manual show the original tire details for comparison.
Is the Tacoma spare tire full size?
Yes, the Toyota Tacoma generally carries a full-size spare under the bed. That spare may still differ from the road tires in wheel type, brand or tread. Checking the sidewall code confirms whether its size matches the other four.
How fast can I drive on my Tacoma spare tire?
The maximum speed on a Tacoma spare is set by the speed rating letter on that tire. A compact temporary spare carries a lower limit printed on its sidewall or wheel label. Low pressure, heavy loads or an aged tire call for slower speeds than the letter allows.
Can I use the Tacoma spare tire permanently?
A full-size Tacoma spare can serve as a regular tire only if it matches the others in size, type and condition. A mismatched spare should be treated as a short-term fix until the flat is repaired or replaced. A tire shop can advise on matching tread depth, especially on four-wheel-drive trucks.
Does the spare need the same load rating as the other tires?
Yes, the Tacoma spare should have a load index equal to or higher than the original tires. A lower load index reduces how much weight that corner of the truck can carry. Compare the load index on the spare with the original tire size code on the door placard or in the owner's manual.