How to Measure Motorcycle Rim Width
Learn where to measure a motorcycle rim, which tools give an accurate reading, and how to convert the inside rim width between inches and millimeters.
Contents
- Where the rim width measurement is taken
- Tools that read inside rim width
- Removing the tire before measuring
- Motorcycle rim width questions
- Is motorcycle rim width measured bead seat to bead seat?
- Is motorcycle rim width given in inches or millimeters?
- Can you measure rim width with the tire still on?
- Why does motorcycle rim width matter for tire fitment?
To measure motorcycle rim width, take the inside distance between the rim flanges where the bead sits. That figure matches the nominal width marked on many rims, not the outer edge-to-edge size. This page covers where to place the tool, which tools work, and how to read the result.
Where the rim width measurement is taken
Motorcycle rim width measurement is taken across the inside of the rim, between the two flange walls. The rim flange is the raised outer lip that holds the tire bead in place. Just inside each flange sits the bead seat, the ledge where the tire bead locks when inflated. A rim flange-to-flange reading over the outer edges gives a larger number that does not match tire charts.
Tools that read inside rim width
Inside rim width is read with a caliper, a rim width gauge, or a steel ruler. A caliper with inside jaws gives a precise reading when the jaws rest against both flange walls. A rim width gauge is a dedicated tool that spans the inner flanges and shows the width directly. Take readings at several points around the wheel, since a bent or dented rim can vary.
Removing the tire before measuring
An accurate motorcycle wheel rim width reading needs the tire off the rim. With the tire mounted, the bead seat and inner flange walls are hidden from the tool. Dismounting a motorcycle tire can damage the bead or rim, so a trained tire technician should do it. On spoked wheels, ignore the rim band, the rubber or tape strip covering spoke nipples, when placing the tool.
Motorcycle rim width questions
Is motorcycle rim width measured bead seat to bead seat?
Yes, motorcycle rim width is measured across the inside, from one bead seat area to the other. The reading is taken against the inner faces of the flanges that rise above each bead seat. Tire makers list approved rim widths using this inside figure.
Is motorcycle rim width given in inches or millimeters?
Motorcycle rim width is marked in inches on many rims, written like 17 x 3.50. In that marking, 17 is the rim diameter and 3.50 is the inside width. One inch equals 25.4 millimeters, so a caliper reading converts easily either way. Letters such as MT next to the width name the rim profile type, not a size.
Can you measure rim width with the tire still on?
No, an accurate inside rim width cannot be read with the tire mounted. The tire bead covers the bead seats and presses against the inner flange walls. Measuring over the outer flanges gives only a rough estimate that runs wider than the true width. The marking stamped on the rim offers another way to learn the width without removing the tire.
Why does motorcycle rim width matter for tire fitment?
Motorcycle rim width decides which tire widths can seat and hold their intended profile. A tire on a rim that is too narrow or too wide can distort its tread shape. Tire makers publish a range of approved rim widths for each tire size. Compare your measured width to that range before choosing a tire.