Tire Markings Chart: Sidewall Numbers and Symbols at a Glance
A quick reference to tire sidewall markings: decode the size code, load index, speed rating, DOT code and symbols, and see how each number shapes tire geometry.
Contents
- How to read a sidewall from left to right
- Decoding the tire size code step by step
- Load index and speed rating in one table
- Sidewall symbols and what each one means
- The DOT code, week and year digits
- How the size code shapes tire geometry
- Using a quick reference chart in practice
- Mistakes to avoid when reading markings
- Tire sidewall marking questions
- What does a tire markings chart show at a glance?
- Can you give some sidewall number examples?
- How do I find the week and year in a DOT code?
- What is the difference between load index and speed rating?
- Do sidewall symbols change the tire geometry?
- Is a tire marking infographic enough to confirm a tire fits my vehicle?
A tire markings chart turns the string of numbers and letters on a sidewall into plain meaning. The first group gives the size code, then come the load index and speed rating, then construction and approval symbols. Read the chart left to right and each symbol has one job.
- The size code such as 225/45R17 gives width, aspect ratio, construction and rim diameter in order.
- The load index is a number code for carrying capacity, and the speed rating is a letter code for maximum speed.
- A DOT code ends with four digits that give the production week and year.
- Symbols on the sidewall cover things like mud and snow use, studding and approval marks.
- Tire geometry follows from the size code, so aspect ratio controls sidewall height.
How to read a sidewall from left to right
A sidewall reads in blocks, and each block answers a different question about the tire. The large size string comes first, then the load and speed codes, then smaller marks for production and approval. A reference chart keeps those blocks in the same order so you can compare tires quickly.
Start with the size designation because it tells you whether the tire fits the wheel and the vehicle. Move to the service description, which pairs a load index with a speed rating. The remaining marks cover where and when the tire was made and what standards it meets.
A tire marking quick reference works on any passenger or light truck tire once you know the block order. Write the blocks down in sequence before you look anything up. The order on the sidewall is the order a chart follows.
- Size code, for example 225/45R17
- Service description, load index plus speed rating
- Construction letter inside the size code
- DOT code with week and year digits
- Symbols for snow, studs and approval
Decoding the tire size code step by step
The tire size format packs four measurements into one string, and reading it in order is the whole trick. A size like 225/45R17 means a 225 millimeter section width and an aspect ratio of 45. The R stands for radial construction, and 17 is the rim diameter in inches.
Section width is measured across the widest part of the inflated tire, not across the tread. Aspect ratio is the sidewall height expressed as a percentage of that width. A lower aspect ratio therefore gives a shorter sidewall on the same width.
Light truck sizes can add a letter before the width, such as LT, and some sizes give the width in inches first. Metric and inch formats both appear on sidewalls, so check which format the tire uses. The size code reference stays the same once you know the format.
Load index and speed rating in one table
The load index and speed rating sit together after the size code and form the service description. The load index is a number code that maps to a carrying capacity per tire. The speed rating is a letter code that maps to a maximum speed under specified conditions.
A load index and speed rating lookup is needed because neither code is a direct unit. Higher numbers and later letters mean greater capacity and higher speed capability. Never fit a tire with a lower load index or speed rating than the vehicle manufacturer specifies.
The table below shows the pattern of the codes, not a full list. Use a complete load index and speed rating table from the tire maker for the exact figure you need. The vehicle placard gives the minimum codes for your car.
| Code type | Example code | What the code gives |
|---|---|---|
| Load index | 91 | Carrying capacity per tire |
| Load index | 104 | Higher capacity per tire |
| Speed rating | H | Speed capability step |
| Speed rating | V | Higher speed capability step |
Sidewall symbols and what each one means
Sidewall symbols are small pictograms and letters that carry specific use and approval information. A mountain snowflake symbol marks a tire rated for severe snow service. The letters M and S mark mud and snow tread, which is a weaker claim than the mountain snowflake.
Other symbols cover studding, rotation direction and inner or outer mounting. An arrow shows the required rotation direction on a directional tire. A mark on one sidewall tells you which face must point outward on an asymmetric tire.
DOT approval marks show the tire meets the relevant safety standard for sale in that market. Treat the symbol list as a guide to what to look for, not as a substitute for the owner manual. A tire shop can confirm any symbol you cannot identify.
The DOT code, week and year digits
The DOT code is a string that ends in four digits giving the production week and year. The first two of those digits are the week of the year and the last two are the year. A tire marked 3221 was built in week 32 of 2021.
Older tires may show a three digit code, which uses a single digit for the year. The four digit form is what you find on tires made since the early 2000s. Reading the DOT code week and year helps you compare the age of two tires on the same vehicle.
The DOT code also includes a plant code and a size code, which are factory references. The week and year digits are the part that matters to a buyer checking freshness. Keep the full code if you need to trace a tire back to its plant.
How the size code shapes tire geometry
Sidewall symbols and tire geometry connect through the size code, because every number in the code sets a dimension. Section width sets how wide the tire sits, and aspect ratio sets how tall the sidewall stands. Rim diameter sets the hole in the middle.
Overall tire diameter comes from the rim diameter plus twice the sidewall height. Changing the aspect ratio while keeping the same width changes that total height. A taller overall diameter affects speedometer reading and clearance, so compare before you swap sizes.
Tire geometry also decides how much sidewall flex is available for absorbing road input. A shorter sidewall flexes less and transmits more of the road surface. A taller sidewall flexes more and gives a softer ride on rough surfaces.
Using a quick reference chart in practice
A tire marking reference sheet speeds up the job when you compare several tires side by side. Write the size code, load index and speed rating for each candidate in a row. Add the DOT week and year so age sits next to size in one view.
A visual chart helps beginners spot the blocks on a real sidewall. Match each block on the tire to the same block in the chart before reading values. Skip any mark the chart does not list and identify it separately.
For group travel vehicles, check that every tire in the fleet carries the same service description and size code. Mismatched codes across axles can change how the vehicle handles a load. Fleet checks belong to a qualified technician when the vehicle carries passengers.
Mistakes to avoid when reading markings
A frequent reading error is taking the aspect ratio as a measurement in millimeters. Aspect ratio is a percentage of section width, so it has no unit of its own. Treating it as a fixed height gives the wrong overall diameter.
Another mistake is reading the load index as a weight in kilograms or pounds. The index is a code that points to a capacity in a table. Look up the value rather than guess from the number.
Confusing the DOT year digits with the model year of the tire is also an error. The code gives production week and year only. When any marking is unreadable or missing, have a trained tire technician inspect the tire before use.
Tire sidewall marking questions
What does a tire markings chart show at a glance?
A tire markings chart shows each block of sidewall text next to its meaning. It covers the size code, load index, speed rating, DOT code and symbols. The chart keeps the order of the blocks the same as on the tire.
Can you give some sidewall number examples?
A sidewall number example is 205/55R16 91V, which reads as 205 millimeters wide, 55 percent aspect ratio, radial, 16 inch rim, load index 91 and speed rating V. Another example is 235/75R15 105S, a taller size with a higher load index. Each number maps to one line in the reference table.
How do I find the week and year in a DOT code?
The DOT code ends in four digits, and those digits give the week and year of production. The first two digits are the week and the last two are the year. Read the four digits as one group, not as two separate dates.
What is the difference between load index and speed rating?
The load index is a number code for how much weight the tire can carry. The speed rating is a letter code for the maximum speed capability. They appear together after the size code as the service description.
Do sidewall symbols change the tire geometry?
Sidewall symbols describe use and approval, not dimensions, so they do not change tire geometry. Geometry comes from the size code, mainly width, aspect ratio and rim diameter. Read the size code when you need to compare dimensions.
Is a tire marking infographic enough to confirm a tire fits my vehicle?
An infographic explains the markings but does not confirm fitment for a specific vehicle. Fitment depends on the size, load index and speed rating the vehicle manufacturer specifies. Check the vehicle placard and have a tire technician confirm the fit.