Tire Load and Speed Rating Table: Reading Both Ratings Together

Learn how a tire load and speed rating table works, what the load index and speed symbol mean, and how to read both ratings together on one sidewall.

9 min read0 views
— · 0 votes
Contents
  1. What the two sidewall codes mean
  2. How to read a load index table
  3. How to read a speed symbol table
  4. Reading both ratings together
  5. Load index vs speed rating: what differs
  6. Where regional charts differ
  7. Matching a tire to the vehicle
  8. Using a rating table at the tire shop
  9. Tire Load and Speed Rating Questions
  10. How do I read a tire rating chart for speed and load indices?
  11. What is the difference between tire load index and speed rating?
  12. Does a higher load index mean a better tire?
  13. Can I fit a tire with a different speed symbol?
  14. Do regional tire charts give different load figures?
  15. What does a combined load and speed rating mean?

A tire load and speed rating table pairs a load index number with a speed symbol letter so you can read the weight a tire carries and the speed it is rated for. The load index is a code for kilograms per tire, and the speed symbol is a code for a maximum speed. Reading both together tells you more than either code alone.

  • The load index number is a code that maps to a load capacity in kilograms per tire, not a weight in pounds on the sidewall.
  • The speed symbol is a letter that maps to a maximum speed, and the rating applies only when the tire carries its rated load.
  • One combined load and speed rating means the load capacity drops as speed rises, so the pair must be read together.
  • A higher load index or speed symbol does not make a tire fit for every vehicle; the vehicle's own specification sets the requirement.
  • A replacement tire should meet or exceed the load index and speed symbol the vehicle manufacturer specifies.

What the two sidewall codes mean

The sidewall rating sequence places a load index number before a speed symbol letter, as in 91V. The load index is a single number that points to a row in a load index table. The speed symbol is a letter that points to a row in a speed symbol table.

A load index chart converts the sidewall load index number into a load capacity per tire in kilograms. A higher load index number maps to a larger load capacity, and the step between numbers is not the same size across the table. The number is a code, so 91 does not mean 91 kilograms.

A speed symbol table converts each speed rating letter into a maximum speed. The letters run in a sequence, and later letters in that sequence stand for higher speeds than earlier ones. The speed symbol alone says nothing about weight, and the load index alone says nothing about speed.

How to read a load index table

A load index table is a two-column chart: the load index on one side, the tire load capacity per index on the other. You find the number printed on the sidewall and read across to the kilogram figure. That figure is the load one tire can carry when it is inflated to the pressure the vehicle specifies.

Read the load capacity as a per-tire figure, then add the tires that share the vehicle's weight. A four-wheel vehicle spreads its load across four tires, and a trailer or a heavy-duty axle spreads it differently. The table does not tell you how the vehicle's weight is distributed, so the vehicle specification does.

Load index rules keep the table honest: the published capacity holds at the stated inflation pressure and under the conditions the tire was rated for. Running a tire below that pressure lowers the load it can carry. A load index number read from the table is a ceiling, not a target to run at.

How to read a speed symbol table

A speed symbol table lists each speed rating letter next to the maximum speed it stands for. You find the letter on the sidewall and read across to the speed figure. That figure is the top speed the tire is rated to sustain while carrying its rated load.

Speed rating letters form an ordered sequence, and each letter covers a band up to its listed speed. The rating belongs to the tire as built, so a repair or a change of size can affect it. A speed symbol is a limit for the tire, and it does not raise the speed limit of the vehicle or the road.

Speed symbol rules tie the letter to load: the rated speed holds only when the tire carries no more than its rated load. Fit a tire with a lower speed symbol than the vehicle specifies and you lose headroom at high speed. The symbol is not a suggestion, and it should match or exceed the vehicle's requirement.

Reading both ratings together

Load and speed rating together describe one working envelope for the tire, not two separate numbers. The combined load and speed rating means the tire can carry its rated load up to its rated speed. Above that speed, the load the tire can carry falls away.

A combined load and speed table shows this relationship directly, with load index and speed symbol read as a pair. Two tires with the same load index but different speed symbols do not share the same envelope. Two tires with the same speed symbol but different load indices differ in the weight they can carry at that speed.

For a tire comparison by rating, put the load index and the speed symbol side by side rather than comparing one column. A tire with a higher load index and a lower speed symbol may suit a heavier vehicle that runs slower. A tire with a lower load index and a higher speed symbol may suit a lighter vehicle that runs faster.

Code on sidewallLoad index meaningSpeed symbol meaningWhat the pair tells you
91VLoad capacity per index from the load tableMaximum speed from the speed symbol tableRated load up to the rated speed, then a falling capacity
95HHigher load capacity than 91Lower maximum speed than VMore weight, less speed headroom
87WLower load capacity than 91Higher maximum speed than VLess weight, more speed headroom

Load index vs speed rating: what differs

Load index and speed rating differ in what they measure: one is weight and the other is speed. The load index maps to kilograms per tire, and the speed symbol maps to a maximum speed. Comparing them directly is a category error, which is why the chart pairs them.

A load index vs speed rating comparison matters when you change tire size. A wider tire may carry a lower load index at the same inflation pressure, and a lower-profile tire may carry a higher speed symbol. Neither change is automatically an upgrade, and the combined rating decides.

Tire ratings side by side show that the two codes move independently across a range. A tire line may offer the same speed symbol with several load indices, or the same load index with several speed symbols. The pair printed on the sidewall is the one that applies to that tire.

Where regional charts differ

Regional tyre charts can differ in how they print the same load index values. Some charts give load capacity in kilograms, others in pounds, and the rounding at each step can vary. The load index code itself is shared, so the number on the sidewall means the same thing across charts.

A load index and speed rating chart printed for one region may add columns for local labeling or inspection requirements. Those columns are not part of the tire's rating and do not change the load or speed figures. Use the code on the sidewall and the physical units, not the extra columns.

Charts also differ in whether they show the combined load and speed table or only the single-column tables. A chart that shows load and speed rating together is more useful for matching a tire to a vehicle. When two charts disagree, trust the units and the code rather than the layout.

Matching a tire to the vehicle

The vehicle manufacturer's specification sets the load index and speed symbol a tire must meet. That specification appears on the tire placard and in the vehicle documentation. A replacement tire should meet or exceed both codes, and a lower code is a downgrade.

Fitting a tire with a lower load index reduces the weight the tire can carry at its rated pressure. Fitting a tire with a lower speed symbol reduces the speed headroom the vehicle was built for. Either change can affect handling and braking, and a trained tire specialist should confirm fitment.

The load index and speed symbol on the sidewall are the starting point, not the whole fitment. Wheel size, rim width, clearance and inflation pressure all interact with the rating. A tire that matches the codes can still be wrong for the wheel, so check the full specification.

Using a rating table at the tire shop

A rating table is a reference, and the sidewall is the authority for the tire in your hand. Read the load index and speed symbol from the sidewall first, then look them up. Do not copy a code from a chart onto an order without checking the tire itself.

Ask for the load index and speed symbol in writing when you compare options. Two tires that look alike can carry different codes, and the difference shows up in the table. A tire comparison by rating is only fair when both codes are stated.

Mounting and inflation are jobs for a trained technician, because a tire seated or inflated incorrectly can injure someone. The table tells you what the tire is rated for, and the technician confirms the wheel and the pressure. Keep the placard specification with the vehicle so the next replacement matches it.

Tire Load and Speed Rating Questions

How do I read a tire rating chart for speed and load indices?

Read the load index number and the speed symbol letter from the sidewall, then look each one up in its own column. The load index gives the load capacity per tire in kilograms, and the speed symbol gives the maximum speed. Read them as a pair, because the rated load holds only up to the rated speed.

What is the difference between tire load index and speed rating?

The load index is a code for the weight one tire can carry, expressed as kilograms per tire in the load table. The speed symbol is a code for the maximum speed the tire is rated to sustain. They measure different things, so a chart pairs them instead of ranking them against each other.

Does a higher load index mean a better tire?

A higher load index means a larger load capacity per tire, not a better tire overall. The right load index is the one the vehicle manufacturer specifies, and going above it adds weight capacity you may not need. Match the vehicle specification and confirm fitment with a trained specialist.

Can I fit a tire with a different speed symbol?

A replacement tire should meet or exceed the speed symbol the vehicle specifies. A lower speed symbol reduces the speed headroom the vehicle was built for and can affect handling. A trained tire specialist should confirm any change before you fit it.

Do regional tire charts give different load figures?

Regional tyre charts can print load capacity in kilograms or in pounds, and rounding at each step may differ. The load index code on the sidewall stays the same across charts. Trust the code and the physical units rather than the chart layout.

What does a combined load and speed rating mean?

A combined load and speed rating means the tire carries its rated load only up to its rated speed. Above that speed, the load the tire can carry falls. The combined load and speed table shows that relationship, which is why the pair is read together.

Latest articles