Tire Load Index Chart by Size
See how a tire load index chart pairs sidewall load indexes with kilograms and pounds, how tire size affects capacity, and how to check the right rating.
Contents
- What the load index number means
- Where the load index sits in the tire size
- Reading a load index chart in kg or lb
- Load index and inflation pressure work together
- Passenger and light truck charts differ
- Checking whether a tire's load index fits
- Load index areas that trip people up
- Load Index Chart Questions
- What is a tire load index chart?
- How do I convert a load index to kg?
- What does load index 117 mean?
- Does tire size change the load capacity?
- Can I fit a tire with a lower load index than specified?
- Why do light truck tires use a different chart?
A tire load index chart pairs each load index number with the maximum load one tire can carry when inflated to the pressure stated for that load. The chart gives a weight in kilograms or pounds for each index, and the tire size on the sidewall tells you which indexes are available for that size. Reading the number on the sidewall and matching it to the chart is the fastest way to find load capacity per tire.
- Find the load index in the size string on the sidewall, after the slash and the aspect ratio.
- A load index number maps to one maximum load per tire, listed in kilograms or pounds.
- The chart weight holds only at the inflation pressure the tire maker specifies for that load.
- A light truck tire often uses a higher load range and a different load-inflation table than a passenger tire.
- Never fit a lower load index than the vehicle maker specifies, because the tire may not support the axle load.
What the load index number means
The load index is a code number on the sidewall that stands for a maximum load per tire at a stated inflation pressure. The number itself is not a weight; you look it up in a load index table to get kilograms or pounds. A higher load index points to a higher load capacity, but the table, not the number, gives the figure.
Load index values run in steps, and each step adds a fixed amount of capacity to the one below it. Because the steps are small, two tires that look alike in size can differ in load rating by one or two indexes. The load index rating belongs to the tire, not to the wheel, so the same wheel can take tires of different ratings.
A load index chart turns that code into a weight so you can compare a tire against the vehicle's requirement. The chart is a lookup, not a calculator, so you need both the number and the table to get an answer. The same index shows as kg per tire or as pounds per tire depending on which column you read.
Where the load index sits in the tire size
The load index on the sidewall sits at the end of the size string, right after the aspect ratio and before the speed symbol. A size such as 225/45R17 94W carries the load index 94 and the speed rating W. Reading the size string in order takes you to the number you need for the chart.
Tire size itself sets the range of load indexes a tire maker can build into a given footprint. A wider or taller tire can hold more air and support more weight, so larger sizes tend to offer higher indexes. Load index by tire size is therefore a range rather than a single value for each size.
A P-metric tire carries a P before the size, while an LT tire carries LT and serves light truck duty. The letters matter because they route you to the right load table and the right inflation rules. Never drop the prefix when you look up load capacity per tire size.
- Locate the size string on the sidewall, for example 225/45R17 94W.
- Note the letter prefix, such as P for passenger or LT for light truck.
- Read the two or three digits after the aspect ratio as the load index.
- Ignore the letter after the load index, which is the speed rating.
- Match the load index number in the chart to get kilograms or pounds.
Reading a load index chart in kg or lb
A load index chart lists every index number in one column and the matching load capacity in kilograms or pounds in the next. Load index to kg conversion is already done in the table, so you read across a row instead of doing arithmetic. A printable load index chart lets you keep the table in the car or the workshop.
The kilogram column and the pound column in a load index chart show the same capacity in two units. A load index to weight conversion is a direct read, and the chart value is rounded to a clean figure. Tire load capacity by size follows from this table once you know which indexes the size offers.
A tire load index chart 117 entry, for example, gives the capacity that index carries so you can compare heavy-duty sizes. The chart does not decide whether a tire suits your vehicle; the vehicle maker's required load rating does. Use the table to check a candidate tire, not to invent a requirement.
| Load index | Load per tire (kg) | Load per tire (lb) |
|---|---|---|
| 91 | 615 | 1356 |
| 94 | 670 | 1477 |
| 100 | 800 | 1764 |
| 110 | 1060 | 2337 |
| 117 | 1285 | 2833 |
Load index and inflation pressure work together
The weight in a load index table applies only when the tire is inflated to the pressure the maker lists for that load. Inflation pressure for load is part of the same lookup, so a chart without a pressure column is only half the answer. Underinflation lowers the load a tire can carry at the same index.
A load-inflation table pairs pressure with load for a specific tire, and the pair changes as pressure rises. Running a tire below the listed pressure for its load raises heat and stress in the sidewall and tread. Care of tires under load starts with checking pressure against the load you actually carry.
Do not raise pressure above the limit molded on the sidewall to gain capacity, because the tire is not built for it. The tire maker's load-inflation table, not a general chart, sets the pressure for a given load. Load capacity per tire is therefore a pressure-dependent figure, not a fixed number.
Passenger and light truck charts differ
A light truck tire load index chart uses different load-inflation rules than a passenger chart, even when the index numbers match. LT tires are built to carry loads at higher pressures, so their table pairs pressure and load in larger steps. A passenger tire and an LT tire of the same index can therefore carry different loads at different pressures.
The load range on an LT tire, such as C, D or E, signals the construction and the pressure the tire is built for. Load range and load index are separate markings, and you need both to read an LT tire correctly. A P-metric tire has no load range letter, so its chart entry is read on its own terms.
Mixing a passenger chart entry with an LT tire, or the reverse, gives a wrong load capacity. Tyre load rating tables from other regions follow the same index numbers, so the index itself travels. The pressure column does not always travel, which is why the correct chart for the tire type matters.
Checking whether a tire's load index fits
Wrong load index tires how to check comes down to comparing the tire's index against the vehicle maker's required rating. The required rating is on the tire placard on the vehicle, not in a generic chart. If the tire index is lower than the placard figure, the tire does not fit the job.
A lower index reduces the maximum load per tire, so the axle may be under-supported at full load or when towing. Fitting a higher index is possible when the wheel and pressure suit it, but it does not raise the vehicle's rated capacity. The placard and the axle load limits remain the ceiling.
Have a trained tire technician confirm fitment when the index is close to the limit or the vehicle carries loads. Inflation pressure must match the load-inflation table for the chosen tire, and the technician can set it. A chart check supports that decision but does not replace it.
Load index areas that trip people up
The index number on the sidewall is easy to confuse with the speed symbol that follows it, so read the position carefully. A load index chart explained properly shows that the number before the letter is load and the letter is speed. Reversing them gives a meaningless lookup.
A tire can carry dual load markings when it is built for both single and dual fitment, and each has its own index. Use the index that matches how the tire is mounted on the vehicle. Dual fitment reads from a separate part of the sidewall markings.
Rounding in a chart is normal, and the exact figure appears in the tire maker's data book. For legal load limits, use the figure the manufacturer publishes for the tire. A region-specific chart, such as a Canada load index chart, keeps the same index values but may list the required markings differently.
Load Index Chart Questions
What is a tire load index chart?
A tire load index chart is a table that pairs each load index number with the maximum load one tire can carry, given in kilograms or pounds. The index is molded on the sidewall at the end of the size string. Reading the number against the table gives the load capacity per tire.
How do I convert a load index to kg?
You convert a load index to kg by reading the kilogram column for that index in a load index table. The table already holds the conversion, so no arithmetic is needed. If only pounds are listed, the kilogram figure is the same capacity expressed in metric units.
What does load index 117 mean?
Load index 117 means the tire is rated for the maximum load listed for index 117 in the load index chart, not a weight printed on the tire. Index 117 sits in the heavier range used by large and light truck sizes. Check the pressure listed with that load in the tire maker's load-inflation table.
Does tire size change the load capacity?
Yes, tire size changes the range of load indexes a maker can build, so larger sizes can offer higher capacities. The index is the deciding marking, and the chart gives the weight for that index. Two sizes with the same index carry the same rated load at the listed pressure.
Can I fit a tire with a lower load index than specified?
No, a tire with a lower load index than the vehicle placard specifies does not meet the vehicle's load requirement. The lower index means less maximum load per tire at the listed pressure. Fitting one can leave the axle under-supported, so choose a tire that meets or exceeds the placard figure.
Why do light truck tires use a different chart?
Light truck tires use a different load-inflation table because they are built to carry loads at higher pressures than passenger tires. An LT tire and a passenger tire with the same index can therefore have different capacities at their own pressures. Use the chart that matches the tire type on the sidewall.