Metric Tire Size Chart for 17-Inch Rims

Read a metric tire size for a 17-inch rim and work out the section width, aspect ratio, sidewall height and overall diameter in millimeters and inches.

8 min read1 views
— · 0 votes
Contents
  1. What each number in a metric size means
  2. Calculating sidewall height from the aspect ratio
  3. Working out overall diameter in millimeters and inches
  4. Reading a 17-inch rim size chart by column
  5. Comparing two 17-inch sizes side by side
  6. Checking load index and speed symbol
  7. When the chart alone is not enough
  8. Questions about 17-inch metric tire sizes
  9. What does a metric tire size chart for 17-inch rims show?
  10. How do I do a quick tire size 17 lookup?
  11. How do I calculate overall diameter in millimeters and inches for a 17-inch tire?
  12. What is the aspect ratio on a 17-inch tire?
  13. Can I fit a different 17-inch size than the original?

A metric tire size for a 17-inch rim is written as three numbers, such as 225/45R17, and each one describes a different dimension. The first number is the section width in millimeters, the second is the aspect ratio, and R17 states that the tire fits a 17-inch rim diameter. From those numbers you can calculate the sidewall height and the overall diameter without measuring the tire.

  • The size 225/45R17 means a 225 mm section width, a 45 aspect ratio and a 17-inch rim diameter.
  • Sidewall height is the section width multiplied by the aspect ratio, divided by 100.
  • Overall diameter equals the rim diameter plus two sidewall heights.
  • A 17-inch rim needs a size that ends in R17, and the width and aspect ratio can vary.
  • Compare two sizes by their calculated overall diameter before you change anything.

What each number in a metric size means

A metric tire size packs three dimensions into one code, and reading it in order keeps the chart simple. The first number is the section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, which is the sidewall height expressed as a percentage of the section width.

The letter after the slash marks how the tire is built, and R stands for radial construction. The number after the letter is the rim diameter in inches, so a size ending in R17 is made for a 17-inch rim. A load index and a speed symbol can follow, and they describe carrying capacity and speed capability rather than geometry.

Take 225/45R17 as a worked example. The section width is 225 mm, the aspect ratio is 45, and the rim diameter is 17 inches. A quick size lookup reads these three values straight from the sidewall and ignores the load and speed markings.

Calculating sidewall height from the aspect ratio

Sidewall height follows directly from the section width and the aspect ratio, and the result is a real distance in millimeters. Multiply the section width by the aspect ratio, then divide by 100 to turn the percentage into a length. A 225/45 tire has a sidewall height of 225 times 45 divided by 100, which is 101.25 mm.

The aspect ratio changes the sidewall without changing the width. Two tires with a 225 mm section width but aspect ratios of 45 and 55 have sidewalls of 101.25 mm and 123.75 mm. A lower aspect ratio gives a shorter sidewall on the same width.

Sidewall height matters because it feeds every other dimension in the chart. Overall diameter and the rolling circumference both depend on it. Record the sidewall height for each size you compare so the rest of the calculation stays consistent.

Working out overall diameter in millimeters and inches

Overall diameter is the full height of the tire from the ground to the top of the tread, and it combines the rim with two sidewalls. Convert the rim diameter from inches to millimeters, add twice the sidewall height, and you have the overall diameter in millimeters. Divide that total by 25.4 to get it back in inches.

For 225/45R17, the 17-inch rim is 431.8 mm. Two sidewalls of 101.25 mm add 202.5 mm, giving an overall diameter of 634.3 mm, or about 24.97 inches. Keeping the arithmetic in millimeters first avoids rounding errors when you compare sizes.

Overall diameter in millimeters and inches tells you how a tire sits against another. A size with the same calculated diameter keeps the speedometer reading close to the original. A noticeably larger or smaller diameter changes the reading and the clearance around the wheel arch.

Reading a 17-inch rim size chart by column

A 17-inch rim size chart lists the sizes built for that rim diameter and puts each dimension in its own column. The section width, aspect ratio, sidewall height and overall diameter sit side by side so you can compare sizes at a glance. Every row ends in R17 because the chart is limited to that rim.

Sort the chart by section width first, then by aspect ratio, and the pattern becomes readable. Narrower sizes with a tall aspect ratio give a taller sidewall, while wider sizes with a low aspect ratio give a short one. The overall diameter column shows which sizes land close to each other.

Use the chart as a reference and check the calculated values yourself before relying on a row. A printed chart can round numbers, and the diameter you need depends on the original size on the vehicle. Your tire placard gives the size the vehicle was built for.

Comparing two 17-inch sizes side by side

Comparing two metric sizes for a 17-inch rim comes down to three numbers: section width, sidewall height and overall diameter. Write both sizes in the same format, calculate each diameter the same way, and subtract one from the other. The difference in millimeters shows how far apart the two tires sit.

A 225/45R17 and a 245/40R17 share the same rim diameter but differ in width and sidewall. The wider tire has a 245 mm section width, and its lower aspect ratio brings the sidewall to 98 mm. The calculated diameters are close, so the overall height stays similar while the tread gets wider.

Width changes bring their own limits, and a wider tire can rub on suspension or body parts. Fitment also depends on the wheel width that the rim allows. A trained tire technician can confirm clearance and load rating before a size change is made.

SizeSection widthAspect ratioSidewall heightOverall diameter
225/45R17225 mm45101.3 mm634.3 mm (24.97 in)
245/40R17245 mm4098.0 mm627.8 mm (24.72 in)
215/55R17215 mm55118.3 mm668.6 mm (26.32 in)

Checking load index and speed symbol

Load index and speed symbol sit at the end of a metric size, and they set the tire's carrying and speed capability. The load index is a code that maps to a maximum load per tire, and the speed symbol is a letter for a maximum speed. Neither value changes the geometry in the chart.

A replacement tire should meet or exceed the load index and speed symbol of the original size. The vehicle placard lists the values the manufacturer specifies. Fitting a lower load index reduces the tire's rated capacity.

Load index and speed symbol belong to the same size code but answer a different question than width or diameter. Check them separately when you compare a new size. A tire technician can match them to the vehicle and the intended use.

When the chart alone is not enough

A metric tire size chart gives dimensions, and fitment on a vehicle needs more than dimensions. Wheel width, offset, brake clearance and suspension travel all affect whether a tire and rim fit. The chart cannot see any of them.

Changing the overall diameter affects the speedometer, the gearing and the clearance around the wheel arch. A size that calculates close to the original keeps those effects small. A large step away from the original size deserves a professional check.

Mounting and balancing a tire on a rim takes proper equipment and training. Have a tire technician confirm the fitment and perform the installation. The chart is a planning tool, not a substitute for that inspection.

Questions about 17-inch metric tire sizes

What does a metric tire size chart for 17-inch rims show?

A metric tire size chart for 17-inch rims lists sizes that end in R17 and shows the section width, aspect ratio, sidewall height and overall diameter for each. The chart lets you compare sizes built for the same rim diameter. Read each row in the same order as the size code on the sidewall.

How do I do a quick tire size 17 lookup?

A quick tire size 17 lookup reads the three numbers before the R17 and converts them with one formula. Take the section width, multiply by the aspect ratio and divide by 100 for the sidewall. Add twice the sidewall to the converted rim diameter for the overall diameter.

How do I calculate overall diameter in millimeters and inches for a 17-inch tire?

Overall diameter in millimeters is the rim diameter in millimeters plus two sidewall heights. Multiply 17 inches by 25.4 to get 431.8 mm, then add the two sidewalls. Divide the result by 25.4 to express the same diameter in inches.

What is the aspect ratio on a 17-inch tire?

The aspect ratio on a 17-inch tire is the sidewall height as a percentage of the section width. A 45 aspect ratio on a 225 mm width gives a 101.25 mm sidewall. A lower aspect ratio produces a shorter sidewall on the same width.

Can I fit a different 17-inch size than the original?

A different 17-inch size can fit when the calculated diameter stays close to the original and the width suits the wheel. Offset, brake clearance and the load index also need to match the vehicle. A tire technician should confirm the fitment before installation.

Latest articles