Tire Dimension Comparison from Sidewall Markings
Read the numbers on a tire sidewall and compare width, aspect ratio and overall diameter so you can judge fitment and replacement size before you buy.
Contents
- Read the sidewall size code in order
- Section width and sidewall height
- Work out overall diameter
- Compare two sizes side by side
- Nominal versus measured dimensions
- Check rim width compatibility
- Quick mental checks and shortcuts
- Use the comparison before you buy
- Tire Dimension Questions Answered
- How do I compare tire dimensions from sidewall markings?
- Can I compare tire sizes by sidewall numbers without tools?
- How do I calculate overall diameter from tire markings?
- Why do measured tire dimensions differ from the labeled size?
- Does a tire size change affect speedometer accuracy?
- What should I check besides width and diameter when comparing tires?
A tire dimension comparison starts with one code printed on the sidewall: width, aspect ratio and rim diameter in that order. From those three numbers you can work out section height, overall diameter and how a tire sits next to another size. The label is nominal, so measured tire dimensions can differ a little from the arithmetic.
- The sidewall code reads width, aspect ratio, then rim diameter, as in 225/45R17.
- Section height is the width multiplied by the aspect ratio, divided by 100.
- Overall diameter is the rim plus twice the section height, and it drives fitment and speedometer error.
- Comparing two sizes means matching rim diameter and checking diameter change against your vehicle's original size.
- Measured tire dimensions differ from labeled ones because of tread depth, rim width and manufacturer tolerance.
Read the sidewall size code in order
A tire sidewall code such as 225/45R17 packs three numbers into a short string. The first number is section width in millimeters, measured across the widest part of the inflated tire. The second is the aspect ratio, a percentage of that width that gives the sidewall height.
The letter R shows radial construction, which describes how the internal cords are laid. A number after the R is the rim diameter in inches, so 17 means the tire mounts on a 17-inch wheel. Some codes add a load index and a speed rating at the end, which matter for fitment but not for width or height.
A P or LT at the front marks a passenger or light truck version of the code, and you should keep that meaning in the comparison. The format is the same across both, so read the three main numbers first. Everything else on the sidewall is secondary to those.
- 225: section width in millimeters
- 45: aspect ratio as a percentage of width
- R: radial construction
- 17: rim diameter in inches
- 91: load index
- V: speed rating
Section width and sidewall height
Section width is the tire width the manufacturer writes on the label, and it is not the same as tread width. Tread width is the rubber that touches the road, which is narrower than the section width at the widest point. Two tires with the same section width can still show different tread width.
Sidewall height, also called section height, comes from the aspect ratio. Multiply the section width by the aspect ratio and divide by 100 to get section height in millimeters. A 225/45 tire therefore has a nominal sidewall height of about 101 millimeters.
Aspect ratio changes flip the effect between sizes. A taller sidewall on the same width gives more cushioning and a taller overall tire. A lower sidewall on the same width gives a shorter tire and a firmer ride.
| Size | Section width | Aspect ratio | Section height |
|---|---|---|---|
| 205/55R16 | 205 mm | 55 | about 113 mm |
| 225/45R17 | 225 mm | 45 | about 101 mm |
| 245/40R18 | 245 mm | 40 | about 98 mm |
Work out overall diameter
Overall diameter is the height of the tire from the ground to the top, and the sidewall numbers give you it in two steps. Convert the rim diameter from inches to millimeters, then add twice the section height. The result is a nominal overall diameter for that size code.
For a 225/45R17 tire, the rim is about 432 millimeters, and two section heights add about 202 millimeters. The nominal overall diameter is therefore about 634 millimeters, or roughly 25 inches. The calculation is arithmetic on the sidewall markings, so you can do it without tools.
Overall diameter comparison tells you whether a replacement size keeps the same rolling circumference. A change in overall diameter shifts the speedometer reading and the clearance under the fender. Keeping the original diameter close protects both.
- Convert rim inches to millimeters by multiplying by 25.4
- Multiply section width by aspect ratio, then divide by 100
- Double the section height
- Add the doubled section height to the converted rim
- Round the result for a quick working figure
Compare two sizes side by side
A side-by-side size comparison works through four fields at once: width, aspect ratio, rim diameter and the calculated overall diameter. Write each size in the same format so the numbers line up. Then check where the two sizes differ and by how much.
Width comparison shows how the tire sits on the rim and inside the wheel well. A wider section width needs enough rim width compatibility and enough clearance to the suspension. Aspect ratio comparison shows whether the sidewall gets taller or shorter between the two sizes.
Diameter comparison is the fitment check that decides most swaps. A size with a matching diameter but a wider section may still rub at full steering lock. Use the side-by-side numbers as the starting point and confirm clearance on the vehicle.
- Line up width, aspect ratio and rim diameter
- Calculate overall diameter for both sizes
- Note the width difference in millimeters
- Note the diameter difference in millimeters
- Check clearance to suspension, brakes and body
Nominal versus measured dimensions
Measured versus labeled dimensions differ because the sidewall code is nominal size, not a report of the tire on your wheel. Measured tire width changes with the width of the rim it sits on. A narrow rim pulls the sidewall in, while a wider rim spreads it out.
Tread depth and wear alter the measured overall diameter from a new tire to a worn one. Inflation pressure also moves the measured section width a little. Published tire dimension data is a guide, and the actual tire dimensions on a mounted wheel sit within a tolerance range.
Treat the arithmetic as a close estimate, not a measurement. The comparison still works for checking tire fitment and comparing two tires. For exact figures, measure the mounted tire at the width the vehicle uses.
Check rim width compatibility
Rim width compatibility decides whether a tire mounts correctly and wears evenly across the tread. Every section width has a range of approved rim widths from the tire maker. A tire on a rim outside that range changes shape and contact patch.
A wide tire on a narrow rim bulges at the sidewall, and the tread may crown in the middle. A narrow tire on a wide rim stretches the sidewall and leaves the rim edge exposed. Both cases distort the measured section width from the nominal figure.
Compare the rim width marked on the wheel with the range for the tire you plan to fit. Tire fitment depends on rim width as much as on the sidewall code itself. A trained tire technician should confirm the pairing when the two figures sit at the edges of the range.
Quick mental checks and shortcuts
Quick mental checks let you compare tires from sidewall numbers before reaching for a calculator. Going one step wider with a lower aspect ratio keeps the sidewall height close. A 5 percent width change with a 5 point aspect ratio change roughly holds the overall diameter.
Plus sizing uses this shortcut: each inch added to rim diameter is offset by a step down in aspect ratio. The tire gets wider and the sidewall shorter while the overall diameter stays near the original. It is a fast tire dimensions comparison for planning a wheel change.
A sidewall markings checklist stops mistakes with these shortcuts. Confirm the rim diameter matches the wheel, check the load index and speed rating, and note the diameter difference before committing. These steps catch swapping errors that the arithmetic alone will not.
Use the comparison before you buy
The comparison is only useful if it leads to a fitment decision you can defend. Start from the size on the vehicle placard or the current tire, then compare any candidate size against it. The original size gives you the reference diameter and width.
A replacement tire size check confirms three things: the rim diameter matches the wheel, the overall diameter stays close, and the width clears the body. Load index and speed rating comparison then confirms the tire can carry the vehicle. A trained specialist should confirm the final choice for the vehicle.
Used tires need the same check because the sidewall code on a worn tire still describes the original nominal size. The measured diameter of a worn tire differs from a new one of the same size, which matters when matching tires across an axle. Compare the labeled dimensions first, then measure what is on the wheel.
Tire Dimension Questions Answered
How do I compare tire dimensions from sidewall markings?
Tire dimension comparison from sidewall markings uses the width, aspect ratio and rim diameter in that order. Calculate section height from width and aspect ratio, then add twice that to the rim diameter for overall diameter. Compare those results between the two tires you are weighing.
Can I compare tire sizes by sidewall numbers without tools?
Yes, a sidewall number comparison works with basic arithmetic or a quick mental estimate. Width, aspect ratio and rim diameter give section height and overall diameter in a few steps. The figures are nominal, so they guide the comparison rather than replace a measurement.
How do I calculate overall diameter from tire markings?
Overall diameter comes from converting rim inches to millimeters, then adding twice the section height. Section height is the section width multiplied by the aspect ratio, divided by 100. The result is the nominal overall diameter for that size code.
Why do measured tire dimensions differ from the labeled size?
Measured versus nominal dimensions differ because the label is a reference size, not a measurement of the tire on your rim. Rim width, inflation, tread depth and manufacturer tolerance all shift the actual tire dimensions. The labeled figures remain the reliable basis for comparison.
Does a tire size change affect speedometer accuracy?
Yes, a change in overall diameter changes how far the tire travels per revolution and shifts the speedometer reading. A larger diameter makes the speedometer read lower than actual speed, and a smaller one reads higher. Comparing overall diameter before a swap keeps that change small.
What should I check besides width and diameter when comparing tires?
Rim width compatibility, load index and speed rating belong in the same comparison. A tire must sit within the approved rim width range and meet the vehicle's load and speed needs. A trained tire technician should confirm the fitment for your vehicle.