Side-by-Side UTV Tire Sizes by Brand: Polaris, Honda, Kawasaki and Kubota
Read UTV tire sizes by brand for Polaris, Honda, Kawasaki and Kubota. Learn how sidewall markings, overall diameter, width and rim diameter work together.
Contents
- How to read a UTV tire size
- Polaris side-by-side tire sizes
- Honda Pioneer and other Honda side-by-side sizes
- Kawasaki Teryx and Mule tire sizes
- Kubota RTV tire sizes
- Why the same brand has several sizes
- What to check before changing tire size
- UTV tire size questions by brand
- What is the Polaris side-by-side tire size?
- What is the 2010 Polaris Ranger EV tire size?
- What is the Honda side-by-side tire size?
- What is the Kawasaki side-by-side tire size?
- What is the Kubota side-by-side tire size?
- Can I fit a larger UTV tire without other changes?
Side-by-side UTV tire sizes vary by brand, by model and by the trim level of the same model. The size is printed on the sidewall as a set of numbers that describes tire width, aspect ratio and rim diameter. Polaris, Honda, Kawasaki and Kubota each publish stock sizes per machine, so you match the model, not the brand alone.
- A UTV tire size is read from three sidewall numbers: width, aspect ratio and rim diameter.
- Overall diameter is calculated from the width and aspect ratio, then doubled and added to the rim diameter.
- Polaris, Honda, Kawasaki and Kubota each list stock tire sizes by model and year.
- The Polaris Ranger EV uses a different size set than the gas Ranger models.
- Wheel width and offset must match the tire and the machine, not just the diameter.
How to read a UTV tire size
A UTV tire size on the sidewall follows the format width, aspect ratio and rim diameter, such as 27x9R14 or 26x11-12. The first number is the tire width in inches, the second is the sidewall height as a percentage of that width, and the last is the rim diameter in inches.
The letter R marks radial construction and a dash marks bias construction, which affects how the tire carries load and how the sidewall flexes. The aspect ratio is not a height in inches; it is a percentage of the tire width. A wider tire with the same aspect ratio therefore has a taller sidewall.
Overall diameter is the number that matters most for clearance. It is the width multiplied by the aspect ratio, doubled, then added to the rim diameter. A 27x9R14 and a 27x11R14 share a nominal diameter but differ in width and in how they sit on the rim.
| Size marking | Width | Aspect ratio | Rim diameter |
|---|---|---|---|
| 27x9R14 | 9 in | Not used in flotation format | 14 in |
| 26x11-12 | 11 in | Not used in flotation format | 12 in |
| 28x10R14 | 10 in | Not used in flotation format | 14 in |
Polaris side-by-side tire sizes
Polaris side-by-side tire sizes differ across the Ranger, RZR and General families, and within a family by model and trim. The Polaris RZR tire size on a trail model is narrower and smaller in diameter than the size on a wide-travel sport model. A Ranger built for cargo and towing carries a different size again.
The Polaris Ranger EV tire size is the one to check carefully, because the electric Ranger has its own stock fitment. For the 2010 Polaris Ranger EV, the size on the sidewall of the original tires is the reference, and the vehicle label or owner information repeats it. Do not assume a gas Ranger size fits the EV.
Polaris fitments often use a front and rear size pair, with a narrower front tire and a wider rear tire. Matching that pair keeps the steering feel and the load rating as designed. When you change diameter, check fender and suspension clearance on the specific model.
- Read the sidewall size on the machine you own.
- Check the vehicle label for the stock size.
- Compare front and rear sizes as a pair.
- Confirm rim width before fitting a wider tire.
- Check clearance at full steering lock and full suspension travel.
Honda Pioneer and other Honda side-by-side sizes
The Honda Pioneer tire size depends on the model, with the Pioneer 500, 700 and 1000 using different stock fitments. Honda also builds the Talon sport side-by-side, which uses a wider, larger-diameter size than the Pioneer utility models. Each model's owner information lists the stock size.
A Honda side-by-side tire size is written in the same flotation format as other UTV tires, with width and rim diameter on the sidewall. Some Honda fitments use a front and rear pair, while others use the same size at all four corners. Check both axles before you order a set.
Rim diameter and wheel width must suit the Honda model. A larger rim with a low-profile tire changes ride height and sidewall flex, which affects how the machine handles rough ground. Confirm clearance and load rating for the specific Pioneer or Talon model.
Kawasaki Teryx and Mule tire sizes
The Kawasaki Teryx tire size and the Kawasaki Mule tire size are separate fitments, so the brand name alone does not answer the question. The Teryx is a sport-leaning side-by-side with a wider track, and the Mule is a utility machine with its own wheel and tire set. Model and year decide the size.
Kawasaki fitments sometimes pair a narrower front tire with a wider rear, as many side-by-side vehicles do. That pairing supports steering response at the front and traction at the rear. Replacing all four with one size changes the balance the machine was built around.
Before fitting a different diameter, check clearance at the fenders and at the suspension. A taller tire raises the machine and can bring the tire close to bodywork at full compression. The wheel offset also has to keep the tire inside the bodywork and clear of the frame.
Kubota RTV tire sizes
The Kubota RTV tire size follows the utility focus of the RTV line, with sizes chosen for load carrying and ground clearance. Kubota RTV models include the RTV500, RTV900 and RTV-X series, and each has its own stock fitment. The sidewall of the original tire and the owner information give the reference size.
Kubota side-by-side tire size questions often come from owners adding a plow, a bed load or a trailer. A heavier load calls for a tire and wheel rated for it, and the size alone does not tell you the load rating. Check the load index or the rated capacity marked on the tire.
The RTV line uses wheels and tires sized for work at low speed on rough ground. Changing to a larger diameter or a different rim changes the gearing effect and the clearance. Confirm that the new size fits the wheel width and does not rub under load.
Why the same brand has several sizes
A single UTV brand builds several platforms, and each platform carries its own tire size. Polaris, Honda, Kawasaki and Kubota all sell machines with different wheelbases, suspension travel and cargo capacity. The tire size follows the platform and the job the machine does.
Trim level also matters. A base model and a deluxe trim of the same name can leave the factory on different wheels and tires. Model year adds another change, because makers revise fitments between years. The stock tire size by model and year is the reliable reference.
Aftermarket wheels change what fits. A wheel with more offset pushes the tire outward and can create rubbing at the fender. A wider wheel stretches the tire and changes its overall diameter and sidewall shape. Match the wheel width and offset to the tire and the machine.
What to check before changing tire size
Tire width, overall diameter, rim diameter and wheel width work as a set, and changing one affects the others. A wider tire on the same rim can bulge and lose sidewall support. A taller tire adds ground clearance but costs clearance to the fenders and frame.
Load rating belongs in the check for any UTV that carries cargo or pulls a trailer. The tire and wheel each have a rated capacity, and the lower of the two sets the limit. A size that fits but is rated below the machine's load is not a safe fitment.
Clearance checks belong at full steering lock and at full suspension compression, not just at rest. Check the inner sidewall against the frame and suspension arms, and the outer edge against the bodywork. A trained technician can confirm fitment and torque settings where the job needs one.
UTV tire size questions by brand
What is the Polaris side-by-side tire size?
The Polaris side-by-side tire size depends on the family, model, trim and year, so Ranger, RZR and General machines each carry their own stock fitment. Read the size on the sidewall of the original tire or on the vehicle label. Polaris fitments often use a narrower front tire and a wider rear tire as a pair.
What is the 2010 Polaris Ranger EV tire size?
The 2010 Polaris Ranger EV tire size is the size marked on its original tires or listed for that model year in the vehicle information. The electric Ranger has its own fitment, so a gas Ranger size does not carry over. Confirm the front and rear sizes on the machine before ordering replacements.
What is the Honda side-by-side tire size?
The Honda side-by-side tire size differs between the Pioneer 500, Pioneer 700, Pioneer 1000 and the Talon. Each model lists its stock size in the owner information and on the original tire sidewall. Some Honda fitments use one size at all four corners while others use a front and rear pair.
What is the Kawasaki side-by-side tire size?
The Kawasaki side-by-side tire size depends on whether the machine is a Teryx or a Mule, and on the model and year. The two lines use separate wheels and tires, so a size from one does not describe the other. Check the sidewall or the owner information for the specific machine.
What is the Kubota side-by-side tire size?
The Kubota side-by-side tire size comes from the RTV model, such as the RTV500, RTV900 or RTV-X series. Each model has its own stock fitment listed in the owner information. A Kubota RTV used for heavy loads also needs a tire and wheel rated for that load.
Can I fit a larger UTV tire without other changes?
A larger UTV tire may fit, but it changes ground clearance, gearing effect and clearance to the bodywork and suspension. Check the tire at full steering lock and full suspension travel before you rely on the fit. Wheel width and offset also decide whether the larger tire clears the machine.