Scale Model Car Tires by Scale: 1:8, 1:12, 1:16, 1:18, 1:24 and 1:25

How scale model car tires are sized at 1:8, 1:12, 1:16, 1:18, 1:24 and 1:25. Convert full-size tire diameter, width and sidewall into the scale you build.

3 min read1 views
— · 0 votes
Contents
  1. Dividing full-size numbers by scale
  2. Why 1:24 and 1:25 differ
  3. Sidewall and width in miniature
  4. Scale model car tire questions
  5. What are 1 12 scale model car tires?
  6. How do 1 16 scale model car tires compare with 1 18?
  7. How do I find the 1 18 or 1 24 tire size I need?
  8. Does a 1 25 tire fit where a 1 24 tire was made?

Scale model car tires by scale follow one simple rule: a real tire dimension divided by the scale number gives the miniature size. A 1:18 tire is one eighteenth of the full-size diameter and width, while a 1:24 or 1:25 tire is roughly a twenty-fourth part. The lists below explain each scale, how to convert a tire size, and where the sidewall and width cause trouble on a build.

Dividing full-size numbers by scale

Scale model tire diameter comes from dividing the real tire diameter by the scale number. A full-size tire of about 25 inches becomes roughly 3.1 inches at 1:8 and close to 1 inch at 1:24. The same division applies to tread width, so a real 9-inch width becomes a narrow strip in the smaller scales. Measure the model wheel arch before you trust a single number.

Why 1:24 and 1:25 differ

A 1:24 tire and a 1:25 tire are close but not identical, because the two scales split the same real dimension differently. A real 25-inch diameter gives about 1.04 inches at 1:24 and about 1 inch at 1:25. Mixing parts from the two scales leaves a small gap at the axle or arch. Treat 1:25 as its own scale when you match tires to a body.

Sidewall and width in miniature

Tire sidewall in miniature holds the shape of the tire even when the diameter is small, so the sidewall height must shrink with the scale. A tall sidewall on a real car becomes a thin ring at 1:16 or 1:18, and a short sidewall almost disappears at 1:24. Tire width in scale decides whether the tire sits inside the arch or rubs the body. Check both measures together rather than the diameter alone.

Scale model car tire questions

What are 1 12 scale model car tires?

A 1:12 tire is one twelfth the size of the full-size tire it copies. A real 24-inch diameter becomes about 2 inches at 1:12, and the tread width shrinks by the same twelfth. The larger scale leaves room for a detailed sidewall and tread pattern.

How do 1 16 scale model car tires compare with 1 18?

A 1:16 tire is larger than a 1:18 tire that copies the same real car. A full-size 26-inch diameter gives about 1.6 inches at 1:16 and about 1.4 inches at 1:18. The width divides in the same way, so the 1:16 tire also stands wider.

How do I find the 1 18 or 1 24 tire size I need?

A 1:18 or 1:24 tire size comes from dividing the real tire diameter and width by that scale number. Note the full-size tire dimension from the vehicle you are modeling, then divide it by 18 or 24. Compare the result with the wheel arch and rim on the kit before fitting.

Does a 1 25 tire fit where a 1 24 tire was made?

A 1:25 tire sits slightly smaller than a 1:24 tire for the same real dimension. A 25-inch real diameter is about 1 inch at 1:25 and about 1.04 inches at 1:24. Use a 1:25 tire on a 1:25 body to keep the arch and axle spacing consistent.

Read next

Latest articles