Reading Tire Specifications on the Sidewall
Learn to read tire sidewall markings: size code, load index, speed symbol, DOT date code and UTQG grades, so you can check any tire at a glance.
Contents
- Decoding the tire size code
- Load index and speed symbol
- UTQG, pressure and the DOT code
- Questions about sidewall markings
- How do I read tire sidewall information in order?
- What does the UTQG rating on a tire sidewall tell me?
- Where is the DOT date code on a tire?
- Can I fit a tire with a different load index or speed symbol?
Reading tire specifications on the sidewall means matching each molded marking to a meaning: the size code, the load index and speed symbol, the maximum pressure, the DOT code and the UTQG grades. The sidewall label packs all of these into one band of raised characters around the tire. Once you know the order and the format of each marking, you can identify a tire without any paperwork.
Decoding the tire size code
The tire size code is the first long marking you meet, written like 225/45R17, and each part of it describes a dimension. The first number is the section width in millimeters, measured across the tire body. The number after the slash is the aspect ratio, meaning the sidewall height as a percentage of that width. The letter gives the tire construction code, where R stands for radial, and the final number is the wheel diameter in inches.
Load index and speed symbol
The load index and speed symbol sit together as two characters right after the size, like 91V. The load index is a code number that maps to a maximum load per tire, so a higher number points to a stronger carcass. The speed symbol is a letter that maps to a maximum speed the tire is built to sustain. You must match both figures to what the vehicle maker specifies, and an expert can confirm the correct pair for your car.
UTQG, pressure and the DOT code
The UTQG rating appears as three separate markings: treadwear grade, traction grade and temperature grade, and each one rates a different quality of the tread. A separate line states the maximum pressure in pounds per square inch, which is a ceiling for inflation rather than a target you set every day. The DOT code is a string of characters ending in four digits, and that final group is the DOT date code showing the week and year of manufacture. Letters on the DOT line also identify the plant where the tire was built.
Questions about sidewall markings
How do I read tire sidewall information in order?
Read the tire sidewall from the largest size code outward, then pick up the load index and speed symbol. The UTQG lines, the maximum pressure line and the DOT code follow in their own separate bands. Reading in that order keeps the tire specification help logical, because the size comes first and the ratings come after.
What does the UTQG rating on a tire sidewall tell me?
The tire sidewall UTQG rating covers treadwear grade, traction grade and temperature grade as three independent scores. Treadwear grade compares wear rate against a reference tire, traction grade rates wet braking on a test surface, and temperature grade rates heat resistance at speed. Grading rules are set per market, so the scores are not identical everywhere.
Where is the DOT date code on a tire?
The DOT date code is the last group of digits on the DOT code line, and it is often molded on one side of the tire only. The four digits give the week and the year of manufacture in that order. Check both sidewalls if you cannot find the full code on the outer face.
Can I fit a tire with a different load index or speed symbol?
A load index or speed symbol below the vehicle maker's specification should not be fitted, because the tire is not rated for that duty. A higher load index changes the ride and the way the tire handles heat, so it is not a free upgrade either. Ask a tire technician to confirm any change against the vehicle plate before you buy.