Ram 1500 Hub Bore Size for 2016 Models

The 2016 Ram 1500 hub bore size, what the center bore measures, and how hub-centric rings keep an aftermarket wheel centered on the axle hub.

3 min read1 viewsRam 1500 Hub Bore Size for 2016 Models
— · 0 votes
Contents
  1. Reading the 2016 Ram 1500 center bore
  2. Why hub-centric rings matter
  3. Matching bore to bolt pattern
  4. Ram 1500 hub bore questions
  5. What is the hub bore size on a 2016 Ram 1500?
  6. Do I need hub-centric rings for aftermarket wheels on a Ram 1500?
  7. Can I fit a wheel with a smaller center bore than my hub?
  8. Is hub bore the same as bolt pattern?

The hub bore size on a 2016 Ram 1500 is the diameter of the hole in the center of each wheel that sits over the axle hub. For this truck the nominal figure is 77.8 mm, and you should confirm it on the vehicle or in the wheel specification before buying anything that depends on it. The number matters when you fit aftermarket wheels, because a wheel whose center bore is larger than the hub needs a centering ring to sit true.

Reading the 2016 Ram 1500 center bore

The Ram 1500 center bore is the machined opening at the middle of the wheel, measured across its inner edge. On a 2016 Ram 1500 that opening is built to a nominal 77.8 mm, which corresponds to the hub diameter the wheel must clear. Measure your own hub with a caliper if the wheels came off another truck, since a damaged or painted surface changes the reading. A wheel bore smaller than the hub will not seat at all, whatever else the bolt pattern allows.

Why hub-centric rings matter

Hub-centric rings for Ram 1500 fitments fill the gap when an aftermarket wheel has a larger center bore than the axle hub. The ring centers the wheel on the hub instead of letting the lug nuts carry that job alone. Correctly sized rings make the wheel sit concentric before the lugs are tightened, which reduces the chance of vibration at speed. A ring that does not match both diameters does nothing useful and should not be forced into place.

Matching bore to bolt pattern

Hub bore and bolt pattern are separate dimensions, and both have to match the truck before a wheel goes on. A 2016 Ram 1500 uses a five-lug pattern, and a wheel with the right bore but the wrong lug spacing still will not mount. Check the wheel's stated center bore and pattern against the vehicle rather than assuming a set fits because the diameter looks close. When a wheel needs machining or an adapter to fit, have a qualified tire or wheel specialist handle it.

Ram 1500 hub bore questions

What is the hub bore size on a 2016 Ram 1500?

The hub bore size on a 2016 Ram 1500 is nominally 77.8 mm, which is the center opening the wheel must clear over the axle hub. Treat that figure as a starting point and confirm it against your actual hub with a caliper. Trim levels and replacement parts can vary, so the physical measurement is what settles the fit.

Do I need hub-centric rings for aftermarket wheels on a Ram 1500?

Hub-centric rings are needed when an aftermarket wheel has a center bore larger than the Ram 1500 hub. The rings take up that gap so the wheel centers on the hub rather than on the lug nuts alone. Choose rings that match the wheel bore to the hub diameter on both sides for a proper fit.

Can I fit a wheel with a smaller center bore than my hub?

A wheel with a smaller center bore than the Ram 1500 hub will not seat on the axle, even if the bolt pattern matches. The bore must clear the hub diameter or the wheel stops against the hub face and sits off the mounting surface. Never grind a hub or a wheel to force a fit; use a wheel made for the truck or consult a wheel specialist.

Is hub bore the same as bolt pattern?

Hub bore and bolt pattern are different measurements and both must match the Ram 1500. The center bore is the round opening at the middle of the wheel, while the bolt pattern is the number and spacing of the lug holes. A wheel can have the correct bore yet the wrong lug spacing, so check each figure separately.

Read next

Latest articles