Honda Civic Hub Bore Size

Learn what the Honda Civic hub bore size is, why the wheel center bore must match it, and how hub-centric rings and wheel spacers affect fitment.

3 min read5 viewsHonda Civic Hub Bore Size
— · 0 votes
Contents
  1. What the hub bore measures
  2. Why the bore must match
  3. Measuring the bore and the hub
  4. Honda Civic Hub Bore Questions
  5. What is the hub bore size on a Honda Civic?
  6. Do I need hub-centric rings for Civic wheels?
  7. Can I fit wheels with a larger center bore?
  8. Does the hub bore differ between Civic generations?

The Honda Civic hub bore size is the diameter of the raised center hub on the car that the wheel must sit on, and it differs between Civic generations and trim levels. Matching the wheel center bore to that hub diameter keeps the wheel centered on the axle. This page explains what the bore is, how to measure it, and what happens when the two numbers do not agree.

What the hub bore measures

The Honda Civic wheel center bore is the round opening at the middle of the wheel, measured across its inside edge. The car side has a matching raised hub, and the two must register against each other for the wheel to sit true. A wheel mounts correctly when its bore is the same as or larger than the Civic hub diameter. The bore carries no load by itself on many cars, because the lug nuts clamp the wheel face to the brake rotor.

Why the bore must match

A hub-centric bore for a Civic centers the wheel on the axle instead of relying on the lug studs. When the bore is larger than the hub, the wheel can sit off center and produce vibration or uneven stud loading. A smaller bore cannot fit over the hub at all and must not be forced. The wheel and hub interface is a locating feature, so the correct fit matters more than the bolt pattern alone.

Measuring the bore and the hub

Measure the Honda Civic hub diameter with a caliper across the raised center of the brake rotor or hub flange. Measure the wheel center bore the same way across the opening at the back of the wheel. Compare the two figures before mounting, and check the bolt pattern as a separate step. A tire technician can confirm the size when a caliper reading is unclear.

Honda Civic Hub Bore Questions

What is the hub bore size on a Honda Civic?

The Honda Civic hub bore size is not one figure for all cars, because it changes with generation and trim. The value you need is the hub diameter of your specific Civic, taken from the vehicle or a reliable fitment source. Measure the hub with a caliper before ordering wheels. Do not assume a number from a different model year applies to your car.

Do I need hub-centric rings for Civic wheels?

Hub-centric rings are needed when the wheel center bore is larger than the Honda Civic hub diameter. The rings fill the gap and center the wheel on the hub rather than on the studs alone. A ring set with the correct outside and inside diameters restores hub-centric fitment. Rings do not correct a bore that is smaller than the hub, and the wheel must be replaced in that case.

Can I fit wheels with a larger center bore?

A wheel with a larger center bore can fit a Honda Civic when a hub-centric ring brings the bore down to the hub diameter. The wheel bolts and the ring must both match the car's bolt pattern and hub size. Running a larger bore without a ring leaves the wheel located by the studs, which can cause vibration. Check the fitment with the wheel off the ground before driving.

Does the hub bore differ between Civic generations?

The Honda Civic hub bore does differ between generations and some trim levels, so a wheel that fits one car may not fit another. The wheel center bore, bolt pattern and offset all change across the model's history. Confirm the figures for your own generation and trim rather than a general Civic number. A tire technician or a fitment chart for your exact model settles the question.

Read next

Latest articles