Mobile Home Tire Dimensions

Learn how mobile home tire dimensions work: read the sidewall numbers, separate tire diameter from rim size, confirm the load rating, and measure before you buy.

7 min read1 viewsMobile Home Tire Dimensions
— · 0 votes
Contents
  1. What the sidewall numbers tell you
  2. Tire diameter versus rim size
  3. How section width and aspect ratio work
  4. Load rating and load range
  5. Measuring the wheel on the home
  6. Comparing a replacement size
  7. Mobile home tire dimension questions
  8. Where do I find the mobile home tire dimensions?
  9. Is the last number in the tire size the tire diameter?
  10. Can I fit a different tire size on a mobile home?
  11. What does the load rating mean on a mobile home tire?
  12. How do I measure the rim size on the wheel?

Mobile home tire dimensions are read from the sidewall markings, which give the tire size, the rim diameter and the load rating. The size code describes the tire's width, profile and the wheel it mounts on, not the overall height you measure on the home. Match all three numbers to the original specification before fitting a replacement.

  • Read the sidewall code before you measure anything, because it names the tire size and the rim it fits.
  • Tire diameter and rim size are two different figures, and mixing them up leads to a wheel that will not fit.
  • The load rating must meet or exceed the original figure, since a manufactured home carries a steady load.
  • Section width and aspect ratio together set the tire diameter you can measure on the fitted wheel.

What the sidewall numbers tell you

Mobile home tire dimensions start with the code molded into the sidewall, which packs several measurements into one string. A size such as 225/75R15 splits into a section width in millimeters, an aspect ratio, a radial construction letter and a rim diameter in inches. Each sidewall number has a fixed meaning, so reading them in order gives you the tire size without a tape measure.

Manufactured home tires often carry a light truck style code rather than a plain trailer code, and the letters before the numbers can change what follows. An ST prefix marks a special trailer tire built for towed service, while an LT prefix marks a light truck tire. The prefix matters when you compare a replacement against the original specification.

Write the full code down before you shop, including the load range letter and any speed symbol at the end. A single missed character can point you to a tire with a different capacity. The sidewall also lists maximum inflation pressure, which belongs with the size when you record the original fitment.

Tire diameter versus rim size

Tire diameter and rim size are separate figures that people often swap, and each one describes a different part of the wheel. Rim size is the diameter of the metal wheel the tire mounts on, quoted in inches in the size code. Tire diameter is the height of the whole assembly from the ground to the top of the tire.

The last number in a size code such as 225/75R15 is the rim size, so that tire fits a 15 inch wheel. Tire diameter comes from the section width, the aspect ratio and the rim size combined, and it is the figure you compare when clearance is tight. Two tires with the same rim size can still differ in overall diameter.

Check both dimensions against the wheel well and the axle spacing on the home before you commit to a size. A wider or taller tire can foul the frame or the neighboring tire. Where clearance is limited, confirm the fit with the tire supplier or a trained technician rather than estimating.

How section width and aspect ratio work

Section width is the widest point of the tire from sidewall to sidewall, quoted in millimeters in a metric size code. Aspect ratio is the sidewall height expressed as a percentage of that width, so a 75 series tire has a sidewall equal to 75 percent of its section width. The pair together sets how tall the tire stands.

A lower aspect ratio gives a shorter sidewall and a wider looking tire, while a higher aspect ratio gives a taller sidewall on the same width. Mobile home axles are built around a specific overall diameter, so a change in aspect ratio shifts the ride height. Keep the combined diameter close to the original when you replace a tire.

Some older manufactured home tires use a flotation or numeric code instead of the metric format, and those codes do not split the same way. For those sizes, compare the published overall diameter and section width rather than converting the code yourself. The supplier can confirm the equivalent in a current format.

Load rating and load range

Load rating is the maximum weight a single tire can carry at its rated inflation pressure, and it is the figure that keeps a manufactured home safe on its supports. Each tire on the home shares the structure's weight, so the rating must cover that share with margin. Never fit a tire with a lower rating than the original specification.

Load range letters such as C, D or E describe a band of load capacity and correspond to a maximum inflation pressure. A higher load range carries more weight but also needs more pressure, and the wheel must be rated for that pressure. The rim and valve hardware belong in the same check as the tire.

A tire that is underrated for the load can fail while the home sits stationary, which makes the rating more important than tread appearance. Record the original load range from the sidewall and match or exceed it. A trained tire technician should confirm the rating when the home's weight is unknown.

Measuring the wheel on the home

Measuring the fitted wheel confirms what the sidewall code claims and catches any mismatch from an earlier replacement. Measure the rim diameter across the bead seat, which is the inner ledge the tire seals against, not the outer lip of the wheel. A measurement across the outer flange reads larger than the true rim size.

Measure the tire diameter with the home raised and the wheel off the ground so the tire is unloaded. A straight edge across the top of the tire and a tape to the ground gives the overall height. Compare that figure with the calculated diameter from the size code to see whether the tire matches its marking.

Check the wheel for a stamped size and load figure, which identifies the rim more reliably than a tape measure. Rust, paint and dirt can hide the stamp, so clean the wheel face first. Where the stamp is missing or unreadable, have a technician identify the wheel before you buy tires.

Comparing a replacement size

A replacement tire must match the rim diameter exactly and stay close to the original overall diameter. Section width can vary a little within the space available, but the load rating must meet or exceed the original. Use the original sidewall code as the reference for every comparison.

Fitting a different size changes the ride height, the clearance to the frame and the load carried by each tire. A taller tire lifts the home, and a shorter one lowers it, which affects how the home sits on its supports. Where the home is leveled and set, those changes matter beyond the wheel itself.

Mounting and balancing a tire on a manufactured home wheel is a job for a trained technician with the right equipment. The wheel carries a heavy, stationary load, and incorrect seating or pressure can damage the tire or injure the person fitting it. Supply the sidewall code and let the technician confirm the fitment.

Mobile home tire dimension questions

Where do I find the mobile home tire dimensions?

Mobile home tire dimensions are molded into the sidewall of each tire as a size code. The code gives section width, aspect ratio, construction type and rim diameter, and the same sidewall lists the load range. Write the full string down, including any prefix letters and the load range.

Is the last number in the tire size the tire diameter?

No, the last number in a size code is the rim size in inches, not the tire diameter. Tire diameter is the overall height of the mounted assembly, calculated from the section width, aspect ratio and rim size. Measure the fitted tire if you need the actual diameter.

Can I fit a different tire size on a mobile home?

A different mobile home tire size can fit only if the rim diameter matches and the overall diameter stays close to the original. The load rating must meet or exceed the original figure. Changes in diameter affect ride height and clearance, so confirm the fit with a technician first.

What does the load rating mean on a mobile home tire?

The load rating is the maximum weight one tire can support at its rated inflation pressure. Every tire on a manufactured home shares the structure's weight, so the rating must cover that share. Fit a tire with a rating equal to or higher than the original.

How do I measure the rim size on the wheel?

Measure the rim diameter across the bead seat, which is the inner ledge the tire seals against. Measuring across the outer flange gives a larger, incorrect figure. A size stamp on the wheel is more reliable, so check for one before trusting a tape measure.

Read next

Latest articles