Measuring Bolt Pattern on Trailer Wheels and Hubs
Learn how to measure the bolt pattern on trailer wheels and hubs, count lug holes correctly, and read bolt circle diameter for odd and even lug counts.
Contents
- Counting the lugs first
- Even and odd bolt circles
- Tools and matching the hub
- Questions about trailer bolt patterns
- How do you measure the bolt pattern on a trailer?
- How do you measure the bolt pattern on a trailer hub?
- How do you measure the bolt pattern on trailer wheels?
- How do you measure trailer tire lug spacing?
Measuring the bolt pattern on trailer wheels and hubs starts with counting the lug holes or studs, then measuring across the circle they sit on. The bolt pattern, also called the bolt circle diameter, tells you whether a wheel will sit on a hub and whether the trailer wheel studs line up with the holes. This page explains how to measure the bolt pattern on a trailer hub and on a trailer wheel, and how to measure trailer tire lug spacing with simple tools.
Counting the lugs first
Counting the lug count tells you how many holes or studs the trailer hub bolt pattern has before you measure anything. Trailer wheels use an even number of lugs or an odd number, and the counting method changes with each. Count the trailer wheel studs on the hub, or the holes on the wheel, and write the number down. The lug count is the first half of a bolt pattern figure, such as a five-lug or six-lug pattern.
Even and odd bolt circles
An even lug count is measured straight across the bolt circle from the center of one hole to the center of the hole opposite it. An odd lug count has no hole directly across, so you measure from the center of one hole to the outer edge of the hole farthest from it. The bolt circle diameter is the diameter of the circle that passes through the center of every lug hole. Getting this measurement right is what makes the wheel and hub match.
Tools and matching the hub
A tape measure or a caliper works for the bolt circle measurement, and a straight edge helps you find the outer edge on odd patterns. Measure the trailer hub and the wheel separately, then compare the two results before you fit them. A hub-centric wheel centers on the hub bore rather than on the studs, so the bore matters as well as the bolt pattern. A trailer axle with a different pattern will not accept the wheel, and force will damage the studs.
Questions about trailer bolt patterns
How do you measure the bolt pattern on a trailer?
Measuring the bolt pattern on a trailer means counting the lug holes or studs and then measuring the bolt circle that runs through their centers. For an even number of lugs, measure from the center of one hole to the center of the opposite hole. For an odd number, measure from the center of one hole to the outer edge of the farthest hole. The count and the measurement together give the full pattern.
How do you measure the bolt pattern on a trailer hub?
Measuring the bolt pattern on a trailer hub starts at the studs, because the studs are what the wheel seats on. Count the trailer wheel studs, then measure the circle through their centers with a tape or caliper. Clean the hub face first, so rust or dirt does not push the tape off line. Record the lug count and the bolt circle diameter as a pair.
How do you measure the bolt pattern on trailer wheels?
Measuring the bolt pattern on trailer wheels uses the holes in the wheel face rather than the studs on the hub. Count the holes, then measure the circle through their centers the same way you would on the hub. Lay the wheel flat so the face is square to your tape. Compare the result with the hub before you mount the wheel.
How do you measure trailer tire lug spacing?
Measuring trailer tire lug spacing means measuring the distance between the lug holes that the wheel studs pass through. The spacing is shortest between neighboring holes and longest across the circle, so measure the bolt circle diameter instead for a reliable figure. Use the center of each hole, not the edge. A caliper gives a steadier reading than a tape on small wheels.