Hub-Centric Ring Sizes: Choosing Bore Diameters for Your Wheel and Hub
Learn how hub-centric ring sizes work: read inner and outer bore diameters in millimeters, match wheel center bore to hub bore, and pick the right ring.
Contents
- How hub-centric ring sizes are written
- Matching inner diameter to the hub bore
- Matching outer diameter to the wheel center bore
- Reading a hub centric ring size chart
- The three ring sizes in this topic
- Measuring hub and wheel bores yourself
- Fitting rings and checking the result
- Sizing limits and bolt pattern checks
- Hub-centric ring sizing questions
- What does a hub centric ring size like 60.1 to 73.1 mean?
- How do I choose hub centering ring sizes for my wheel and hub?
- Can a 66.6 to 57.1 ring fit the same setup as a 60.1 to 73.1 ring?
- Where can I find a hub centric ring size chart?
- What is a bore conversion when fitting a wheel?
- Does a hub-centric ring fix a wrong bolt pattern?
A hub-centric ring size is written as two bore diameters in millimeters: the inner diameter fits the hub bore and the outer diameter fits the wheel center bore. You choose a ring whose inner number matches your hub and whose outer number matches the wheel. When the two numbers match the two bores, the ring centers the wheel on the hub instead of on the studs.
- A ring size such as 60.1 to 73.1 means a 60.1 mm inner diameter and a 73.1 mm outer diameter.
- Match the inner diameter to the vehicle hub bore and the outer diameter to the wheel center bore.
- Measure both bores or read them from a bore diameter chart before ordering a ring.
- A ring fills the gap between a larger wheel bore and a smaller hub bore and must sit flush to center the wheel.
- Rings do not change bolt pattern, so the wheel still has to match the stud spacing.
How hub-centric ring sizes are written
A hub-centric ring size is written as two numbers separated by the word 'to', and each number is a bore diameter in millimeters. The first number is the inner diameter, which is the hole that fits over the vehicle hub. The second number is the outer diameter, which presses into the wheel center bore.
The order matters when you read a listing for hub-centric rings. Reading 60.1 to 73.1 as hub first and wheel second keeps the two sides of the part straight. Writing the size the other way round gives you a ring that will not fit either the hub or the wheel.
Ring sizes are quoted in millimeters because wheel and hub bores are machined in millimeters on the vehicles and wheels that use them. A hub bore diameter of 60.1 mm and a wheel center bore of 73.1 mm are two separate measurements. The ring carries both numbers so you can match each side without guessing.
Matching inner diameter to the hub bore
The inner diameter of a hub-centric ring must match the hub bore diameter of your vehicle. A ring with a 60.1 mm inner diameter slides onto a hub machined at 60.1 mm and sits flat against the hub face. Hub bore matching is the first half of hub-centric ring sizing.
Measure the hub bore with a caliper across the raised center of the hub, not across the studs. The hub is the round lip the wheel sits on, and its diameter decides which inner diameter you need. A ring that is too small will not go on, and one that is too large leaves play at the hub.
Some vehicles use a hub bore with a small step or a lip, so check the shape as well as the diameter. A ring must seat on the flat hub face and clear any raised features around the bore. Where the hub is damaged or worn, have a trained technician check the fit before you rely on a ring.
Matching outer diameter to the wheel center bore
The outer diameter of a hub-centric ring must match the wheel center bore, which is the hole in the back of the wheel. A wheel with a 73.1 mm center bore takes a ring with a 73.1 mm outer diameter. Bore conversion works only when this outer number matches the wheel exactly.
The wheel center bore is stamped or cast on the wheel, and you can also measure it with a caliper across the hole. Aftermarket wheels often use a larger center bore than the vehicle hub so one wheel casting fits several vehicles. That larger hole is exactly the gap a centering ring fills.
A ring with the wrong outer diameter either will not enter the wheel or will sit loose inside it. A loose ring cannot center the wheel, and a tight ring can stop the wheel from seating on the hub face. Check the outer diameter against the wheel before you mount anything.
Reading a hub centric ring size chart
A hub centric ring size chart pairs vehicle hub bores with wheel center bores and lists the ring that joins them. A ring sizing chart lets you look up a size such as 66.6 to 57.1 without measuring twice. Treat the chart as a starting point and confirm both numbers on your own parts.
Charts are organized by the hub bore of the vehicle and the wheel center bore of the wheel. Find your hub bore in one column and your wheel bore in another, then read the ring size where they meet. A bore diameter chart for tires and wheels uses the same millimeter units, so the numbers transfer directly.
Chart data can be wrong for a modified hub, a machined wheel or a part from a different model year. Measure the hub and the wheel when either has been changed or repaired. A chart answer is only as good as the two numbers you feed into it.
The three ring sizes in this topic
Hub centric rings 60.1 to 73.1 join a 60.1 mm hub bore to a 73.1 mm wheel center bore. Hub centric rings 66.6 to 57.1 join a 66.6 mm hub to a 57.1 mm wheel bore. Hub centric rings 73.1 to 64.1 join a 73.1 mm hub to a 64.1 mm wheel bore, which is a step down in wheel bore rather than a step up.
Each of these three sizes is a different pair of diameters, and none of them substitutes for another. The 66.6 to 57.1 ring covers a wheel bore smaller than the hub, which is the opposite direction from 60.1 to 73.1. Read the direction of the size before you assume a ring will fit.
A ring can only center a wheel whose bore is larger than the hub bore, because the ring material has to fill space. When the wheel bore is smaller than the hub, no ring can make the wheel fit and the wheel is simply not compatible.
| Ring size | Inner diameter fits | Outer diameter fits |
|---|---|---|
| 60.1 to 73.1 | 60.1 mm hub bore | 73.1 mm wheel center bore |
| 66.6 to 57.1 | 66.6 mm hub bore | 57.1 mm wheel center bore |
| 73.1 to 64.1 | 73.1 mm hub bore | 64.1 mm wheel center bore |
Measuring hub and wheel bores yourself
Measuring both bores with a caliper gives you the two numbers a ring size is built from. Measure the hub bore across the center lip and the wheel center bore across the opening in the wheel. Write both numbers in millimeters and compare them to the ring listing.
Take each measurement more than once and at more than one angle, because a bore can be slightly out of round. A caliper reading to a tenth of a millimeter is enough for ring sizing. Round numbers on a listing, such as 60.1 or 73.1, reflect how the parts are machined, not a rough estimate.
Clean the hub face and the wheel bore before measuring, since dirt and corrosion change the reading. If a bore shows deep rust, cracking or damage, have a trained technician assess it. A ring cannot correct a damaged hub or a deformed wheel.
Fitting rings and checking the result
A hub-centric ring fits by pressing into the wheel center bore and sliding over the hub, so the wheel centers on the hub rather than on the studs. Clean both surfaces, seat the ring fully in the wheel, then mount the wheel and tighten the fasteners in the pattern the maker specifies. Hub-centric fit depends on the ring sitting flush with no gap.
Check that the ring does not protrude past the wheel face and that the wheel sits flat on the hub. Spin the wheel by hand after tightening and look for runout or wobble before driving. Any movement or noise means the ring or the bore is wrong and the wheel should come off.
Rings do not replace correct fastener torque, and they do not fix a bolt pattern mismatch. Where a ring is loose, cracked or deformed, replace it rather than reusing it. Have a trained technician check the installation when you are unsure about the fit.
- Clean the hub face and the wheel center bore before fitting.
- Press the ring fully into the wheel bore and check it sits flush.
- Slide the wheel onto the hub and confirm it seats on the hub face.
- Tighten the fasteners to the maker's torque in the specified pattern.
- Spin the wheel by hand and check for wobble before driving.
Sizing limits and bolt pattern checks
Hub-centric ring sizing can only center a wheel whose center bore is larger than the hub bore, and it cannot change the bolt pattern. The wheel still has to match the stud count and stud spacing of the vehicle. A correct ring on a wheel with the wrong bolt pattern is not a safe fit.
Check the bolt pattern before you order any ring, because the two fitment numbers are separate. A wheel that matches the hub bore but not the bolt pattern will not mount correctly. Rings address the bore gap only and leave the stud geometry unchanged.
Where the wheel bore is smaller than the hub bore, the wheel cannot seat and no ring resolves it. Where a vehicle has been modified with a different hub, measure the new hub rather than trusting the original chart. A trained technician can confirm both the bore and the bolt pattern before the wheel goes on.
Hub-centric ring sizing questions
What does a hub centric ring size like 60.1 to 73.1 mean?
A 60.1 to 73.1 hub centric ring size means a 60.1 mm inner diameter and a 73.1 mm outer diameter. The inner diameter fits a 60.1 mm hub bore, and the outer diameter fits a 73.1 mm wheel center bore. Both numbers must match your parts for the ring to center the wheel.
How do I choose hub centering ring sizes for my wheel and hub?
Measure the hub bore and the wheel center bore in millimeters, then pick a ring whose inner diameter equals the hub and whose outer diameter equals the wheel. Hub centering ring sizes are always written as inner first and outer second. Confirm the bolt pattern separately, since a ring does not change it.
Can a 66.6 to 57.1 ring fit the same setup as a 60.1 to 73.1 ring?
No, a 66.6 to 57.1 ring and a 60.1 to 73.1 ring serve different bore pairs and do not interchange. The 66.6 to 57.1 ring has a larger inner diameter and a smaller outer diameter than the 60.1 to 73.1 ring. Each size matches only the hub and wheel bores it was made for.
Where can I find a hub centric ring size chart?
A hub centric ring size chart is available from wheel and ring suppliers and lists hub bores against wheel center bores. Use the chart to find a candidate ring, then measure your own hub and wheel to confirm. Chart values can be wrong for modified or damaged parts.
What is a bore conversion when fitting a wheel?
A bore conversion uses a ring to adapt a wheel center bore to a different hub bore. The ring fills the gap between the larger wheel bore and the smaller hub bore so the wheel centers on the hub. A bore conversion cannot make a wheel with a smaller bore fit a larger hub.
Does a hub-centric ring fix a wrong bolt pattern?
No, a hub-centric ring does not fix a wrong bolt pattern, because it only fills the bore gap. The wheel must still match the stud count and stud spacing of the vehicle. Check the bolt pattern before ordering a ring, and have a trained technician confirm fitment when unsure.