How to Measure Car Rim Size
Learn how to measure car rim size by reading the sidewall code, checking markings stamped on the wheel, and measuring bead seat diameter and rim width with a tape measure.
Contents
- Start with the tire sidewall code
- Read the stamped markings on the wheel
- Measure rim diameter at the bead seats
- Measure rim width between the flanges
- Measure tire rim size without removing the wheel
- Use a rim size checker for confirmation
- Match the measured size to a new tire
- Questions About Car Rim Size
- How do I find out my rim size without taking the wheel off?
- Do I measure a rim to the outer edge or the bead seat?
- How do I measure car rim diameter with a tape measure?
- What do the numbers on a wheel mean?
- Can I check my wheel size from the tire size?
- Does rim width change the tire size I need?
You measure car rim size by reading the numbers already on the car: the sidewall code gives rim diameter, and the markings stamped on the wheel give diameter and width. When no code is readable, a tape measure across the bead seats confirms the rim diameter. Rim width is measured between the tire bead flanges, not across the outer faces of the wheel.
- Read the tire sidewall first: the number after the slash construction code is the rim diameter in inches.
- Check the markings stamped on the wheel, which state rim diameter and rim width directly.
- Measure bead seat diameter from bead seat to bead seat, not to the outer lip of the rim.
- Measure rim width between the flanges that hold the tire bead, not across the broad outer faces.
- Match any replacement wheel to the original diameter and width before fitting a tire.
Start with the tire sidewall code
The fastest way to find your car rim size is to read the tire size code on the sidewall. A code such as 225/45R17 tells you the tire width, the aspect ratio and the rim diameter in one line. The last number in that string is the rim diameter in inches.
Break the code into its parts so each number means something. The first figure is tire width in millimeters, the middle figure is the sidewall height as a percentage of that width, and the letter is the construction type. The figure after the construction letter is the rim diameter the tire is built to sit on.
The sidewall rim code describes the wheel the tire was designed for, so it is a reliable starting point. Confirm the reading on both sides of the car when you can, because tires may be mixed. If the sidewall is damaged or the code is unclear, move on to the markings on the wheel itself.
Read the stamped markings on the wheel
Wheel markings stamped on the rim give the rim size reading without any measuring at all. Remove the wheel or look at its inner face, where the manufacturer stamps the diameter and width. These wheel size markings are the reference a tire technician uses.
A stamped size such as 17x7.5 means a 17 inch rim diameter and a 7.5 inch rim width. The first number is always the diameter and the second is the width, both in inches. Letters and extra codes on the same stamping describe offset, bolt pattern and manufacturing details.
Wheel markings can hide behind brake calipers, dirt or a layer of paint. Clean the inner face with a cloth and use a light to read the stamping clearly. A photo of the marking is useful when you order a replacement wheel or a new tire.
Measure rim diameter at the bead seats
Measuring car rim diameter by hand means measuring bead seat to bead seat, the ledge where the tire bead sits. Hook a tape measure on one bead seat and read across the center to the opposite bead seat. This gives the bead seat diameter, which is the figure the tire code states.
Do not measure to the outer lip of the rim. The outer flange sits beyond the bead seat, so a tape across the outside faces reads larger than the true rim diameter. A wheel that reads 18 inches across the outer edges may be a 17 inch rim in the bead seat diameter.
Work on a clean, flat surface with the wheel off the car for an accurate reading. Keep the tape straight through the center and read the same point on both sides. A measurement that lands between two whole inches suggests the wheel is a different diameter than expected, so repeat the check.
Measure rim width between the flanges
Rim width is the distance between the flanges that hold the tire bead, not the overall width of the wheel. Place a straight edge against each flange and measure the gap between them. The result is the rim width you compare with the tire specification.
The category point matters here: rim width affects the tire dimensions once the tire is mounted. A wider rim spreads the tire carcass and changes its section width, while a narrow rim pulls the sidewalls inward. Tire makers publish a range of approved rim widths for each tire size.
Measure width on the wheel you intend to fit, because two wheels of the same diameter can differ in width. Record the width in inches alongside the diameter so the pair matches the tire size code. A width outside the tire maker's approved range is a fitment question for a trained specialist.
Measure tire rim size without removing the wheel
You can check wheel size on a car with the wheel still fitted when the sidewall code is readable. Park on level ground, turn the steering so the sidewall faces you, and read the tire size code. This answers how to measure a tire rim size in most everyday cases.
The rim size stamped on wheel is not visible with the wheel mounted, so the tire sidewall is your reference in that position. A tire sidewall rim code and the stamped wheel markings should agree. A mismatch means the tire and wheel were not originally paired.
Use a tape measure around the wheel only when no code can be read, and treat that result as an estimate. A flexible tape wrapped around the outer edge measures circumference, which you can convert to a diameter figure. Measuring rim size this way is a rough check, not a substitute for the bead seat reading.
Use a rim size checker for confirmation
A car rim size checker is a reference tool that confirms what the numbers say rather than replacing them. Charts and fitment guides match a tire size code to the rim diameter and width range it needs. Use the checker after you have read the sidewall or the wheel stamping.
A wheel size checker cannot measure a physical wheel for you, so the numbers you feed it must be correct. Enter the tire size code exactly as it appears on the sidewall, including the construction letter. Compare the checker result with the stamped wheel markings before you buy anything.
Practice measuring wheel rim size on a spare wheel to build confidence with the tape. A spare off the car is easy to handle and lets you compare the tape reading with the stamping. Repeat the steps on the mounted wheels once the method feels familiar.
Match the measured size to a new tire
Match a replacement tire to the rim size you measured, starting with the diameter. A tire built for a different rim diameter will not seat on the bead, so the diameter must agree exactly. The tire size code on the new tire should carry the same diameter figure as the wheel.
Rim width decides which tire widths sit within the tire maker's approved range. A tire that is too wide for the rim bulges and wears unevenly, while a tire that is too narrow leaves the rim edge exposed. Check the approved rim width range published for the tire size.
Mounting a tire on a rim needs proper equipment and training, so leave it to a tire specialist. Report your measured diameter and width when you order, and ask the specialist to confirm the fitment. A correct measurement now prevents a damaged bead or a wheel that fouls the brakes later.
Questions About Car Rim Size
How do I find out my rim size without taking the wheel off?
You read the tire sidewall code with the wheel still on the car. The number after the construction letter in a code like 225/45R17 is the rim diameter in inches. The rim width is not shown in that code, so check the stamped wheel markings or measure the width when the wheel is off.
Do I measure a rim to the outer edge or the bead seat?
Measure the rim diameter at the bead seat, the ledge where the tire bead sits. The outer lip of the rim sits beyond the bead seat, so a tape across the outside faces reads larger than the true size. The bead seat to bead seat figure matches the diameter in the tire code.
How do I measure car rim diameter with a tape measure?
Lay the wheel flat and hook the tape on one bead seat. Pull the tape straight across the center and read the opposite bead seat. The result should match a whole inch figure, which is the rim diameter in inches.
What do the numbers on a wheel mean?
Wheel markings such as 17x7.5 state the rim diameter and rim width in inches. The first number is the diameter and the second is the width. Extra codes on the same stamping cover offset, bolt pattern and other fitment details.
Can I check my wheel size from the tire size?
Yes, the tire size code gives the rim diameter the tire was built to fit. The sidewall does not state rim width, though, so a full wheel size check needs the stamped markings or a width measurement. Confirm both numbers before ordering a replacement.
Does rim width change the tire size I need?
Rim width affects the tire dimensions once mounted, because a wider or narrower rim changes how the carcass sits. Each tire size has an approved range of rim widths published by the tire maker. A width outside that range is a fitment question for a trained specialist.