HKN Snow Chain Installation Instructions
Learn how HKN snow chains fit over the drive wheels, how the cross-type links sit on the tread, and how to tension and recheck the chains after driving.
Contents
- Check fit before you install
- Drape and join the chains
- Tension and recheck after driving
- HKN Snow Chain Fit Questions
- Do HKN snow chains go on the front or rear wheels?
- How tight should HKN snow chains be?
- Can I drive on HKN snow chains on dry pavement?
- What should I do if a cross link breaks on an HKN chain?
HKN snow chain installation instructions guide you through draping the chains over the drive wheels, joining the side connections, and tensioning the cross-type links before you drive. The steps follow the chain maker's manual for your size, and the fit depends on tire dimensions and clearance. Read the manual that ships with the set before you touch the wheel.
Check fit before you install
HKN snow chains must match the tire size printed on the sidewall before any fitting begins. Park on level ground, set the parking brake, and place wheel chocks so the vehicle cannot roll during the job. Check the gap between the tire and the suspension, brake calipers, and inner fender with the chain test-fitted dry. A chain that touches these parts at rest will rub once the vehicle moves, so stop and confirm the size with the manufacturer installation manual.
Drape and join the chains
Lay each HKN chain flat, untangled, with the cross links facing outward and the side chains free of twists. Pull the chain over the top of the drive tire so the cross-type links sit evenly across the tread and the side chains hang down both faces. Connect the inner and outer fasteners by hand, following the order printed in the manual for your set. Leave the tensioner loose at this stage so you can center the chain before tightening.
Tension and recheck after driving
Chain tensioning is the step that holds the cross links in place on the tread. Pull the tensioner until the side chains sit snug, then roll the vehicle forward a short distance so the chain seats on the tire. Stop and check the tension again, since seating can loosen the links, and adjust as the manual describes. Chain tightening after driving is a required recheck, because a loose chain can strike the fender or brake lines.
HKN Snow Chain Fit Questions
Do HKN snow chains go on the front or rear wheels?
HKN snow chains fit on the drive wheels of the vehicle, which are the wheels that receive engine power. On a front-wheel-drive car that means the front axle, and on a rear-wheel-drive car it means the rear axle. All-wheel-drive vehicles may need chains on both axles, so confirm the placement in the manufacturer installation manual. Chain fitting on drive wheels keeps the traction where the vehicle pushes or pulls.
How tight should HKN snow chains be?
HKN snow chains should sit snug enough that the cross links stay flat on the tread without digging into the tire sidewall. Tighten the tensioner by hand until the side chains have no slack loops, then recheck after a short drive. Over-tightening can stress the side chains and the tire, so follow the tension setting in the manual. A chain that still moves freely after tensioning needs another adjustment pass.
Can I drive on HKN snow chains on dry pavement?
HKN snow chains are made for snow and ice, and driving on dry pavement wears the links and can damage the road surface. Remove the chains once you reach clear pavement, following the manual for the removal order. Speed limits for chained driving come from the chain maker and local rules, so check both before you travel. Chain tensioning also changes on hard surfaces, which is one more reason to take them off.
What should I do if a cross link breaks on an HKN chain?
A broken cross link on an HKN chain means the set should come off the wheel before you continue driving. Stop in a safe place, remove the chain, and inspect the side chains and fasteners for further damage. Replace the damaged part with the spare or repair kit named in the manufacturer installation manual. A trained tire specialist should check the set if the break damaged the side chain.
Read next
- Installing Snow Chains on Lawn and John Deere Tractors
-
Which Tires Should You Put Snow Chains On?
-
Low-Profile Tires in Snow: How Size and Tire Type Matter
-
Snow Chain Tire Size Chart: Finding the Right Chain Size From Your Tire Sidewall
-
Are Snow Chains Hard to Install? Start With Your Tire Size and Clearance
-
Snow Chain Clearance: How to Check Tire and Wheel Fitment
-
Snow Sock Tire Size Guide: Finding the Right Fit