GR86 Hub-Centric Ring Size

Learn how to size a hub-centric ring for a GR86 by measuring the hub bore and wheel center bore, so the wheel centers on the hub instead of the lug studs.

3 min read0 views
— · 0 votes
Contents
  1. What the ring actually does
  2. Measuring the GR86 hub bore
  3. Matching the wheel center bore
  4. GR86 Hub-Centric Ring Questions
  5. What size hub-centric ring does a GR86 need?
  6. Can I fit a wheel with a larger center bore without a ring?
  7. Does a hub-centric ring fix wheel vibration?
  8. Should the ring be tight on the wheel or on the hub?

The GR86 hub-centric ring size is the pair of diameters that bridges the car's hub to the wheel: the ring's inner diameter matches the GR86 hub bore and its outer diameter matches the wheel center bore. A centering ring fills the gap between those two circles so the wheel sits concentric with the axle. You find the size by measuring both parts, not by copying a number from another car.

What the ring actually does

A hub-centric ring is a spacer that centers the wheel on the hub rather than on the lug studs. The GR86 hub carries the load through a raised center, and the wheel's center bore should sit on it with no play. When an aftermarket wheel has a larger center bore than the hub, a ring takes up that difference. The ring only centers the wheel; the lug nuts still clamp it to the hub face.

Measuring the GR86 hub bore

Measure the GR86 hub diameter with a caliper across the raised center ring on the brake rotor or hub flange. Take the reading at more than one angle so a burr or dirt does not skew the number. Clean the surface first, because rust or grease changes the measurement by a hair. Write the figure down as your ring's inner diameter.

Matching the wheel center bore

Measure the wheel center bore with the same caliper across the opening in the back of the wheel. The ring's outer diameter has to match this bore closely enough to press in without wobble. Check that the wheel's mounting face is flat and that the ring seats fully against it. A ring that stands proud of the wheel face will not let the wheel sit flat on the hub.

GR86 Hub-Centric Ring Questions

What size hub-centric ring does a GR86 need?

The GR86 hub-centric ring size depends on the wheel, not on the car alone. The ring's inner diameter must match the GR86 hub bore, and its outer diameter must match the center bore of the specific wheel you fit. Measure both parts with a caliper and order the ring that joins those two figures.

Can I fit a wheel with a larger center bore without a ring?

No, a wheel with a larger center bore should not be run without a centering ring if you want it centered on the hub. The lug studs locate the wheel only loosely, and the ring takes up the gap so the wheel bore rides on the hub. Fit the correct ring before the wheel goes on.

Does a hub-centric ring fix wheel vibration?

A hub-centric ring can remove vibration that comes from a wheel sitting off-center on the hub. The ring centers the wheel bore on the hub so the wheel turns true. Vibration from balance, tire damage or a bent wheel is a different problem and a ring will not correct it.

Should the ring be tight on the wheel or on the hub?

The centering ring should press snugly into the wheel center bore and slip over the GR86 hub with no play. A ring that is loose in the wheel can shift and stop centering the wheel. Have a trained technician check the fit if the ring rocks or will not seat.

Latest articles