GD&T Symbols: Meanings and Definitions Reference

Read the meaning of every GD&T symbol, from position and profile to runout, form and orientation, and see how each one sits in a feature control frame.

3 min read3 viewsGD&T Symbols: Meanings and Definitions Reference
— · 0 votes
Contents
  1. The main groups of symbols
  2. Reading the feature control frame
  3. Position and the U symbol
  4. GD&T symbol questions answered
  5. What does the GD&T position symbol mean?
  6. What does the U symbol mean in a GD&T callout?
  7. Where can I find a GD&T symbols chart with meanings?
  8. Can I get the GD&T symbols and definitions as a PDF?

GD&T symbols give drawing callouts a precise meaning, and this reference explains each geometric dimensioning and tolerancing symbol and what it controls. Each entry pairs the symbol with a plain definition, shows how it reads inside a feature control frame, and notes the datum reference and material condition modifiers that change the requirement. You can use it to read a print or to write a callout with confidence.

The main groups of symbols

GD&T symbols fall into groups by the kind of variation they limit. Form tolerances such as flatness, straightness, circularity and cylindricity control the shape of a surface or axis on its own, with no datum needed. Orientation tolerances such as perpendicularity, parallelism and angularity hold a feature to a datum at a set angle, and position, concentricity and symmetry locate features relative to datums. Profile of a line and profile of a surface can act as form, orientation or location controls depending on how the callout is built.

Reading the feature control frame

A feature control frame is the rectangular box that carries a GD&T callout. The first compartment holds the symbol, the second holds the tolerance zone shape and value, and later compartments name the datum reference. A diameter symbol before the value means the zone is cylindrical, while a symbol without it gives a flat zone of two parallel planes. Material condition modifiers, the circled M for maximum material and circled L for least material, adjust the tolerance when the feature departs from that size.

Position and the U symbol

The position symbol marks a zone where the center, axis or surface of a feature must lie, and that zone is centered on the true position given by the basic dimensions. A circular U symbol after the tolerance value, sometimes called the unequal tolerance or unequally disposed profile modifier, shifts a profile zone from its centered state. The number after the U states how much of the total zone is placed on one side of the true profile. This lets a designer send material allowance to the side where it protects function, rather than splitting it evenly.

GD&T symbol questions answered

What does the GD&T position symbol mean?

The GD&T position symbol defines a tolerance zone, often cylindrical, in which the axis, center plane or surface of a feature must fall. Basic dimensions locate the true position of that zone from the stated datums. Position is a location control, so it holds a feature where the design needs it rather than only limiting its shape.

What does the U symbol mean in a GD&T callout?

The U symbol in a GD&T callout indicates an unequally disposed profile tolerance zone. A value of U followed by a number tells the reader how much of the total zone lies on one side of the true profile. The remaining zone falls on the other side, so the feature has more room in the direction the design allows.

Where can I find a GD&T symbols chart with meanings?

A GD&T symbols chart groups each symbol by the control it provides, form, orientation, location, profile or runout. The chart lists the symbol name, its definition and the kind of tolerance zone it creates. The controlling standard, ASME Y14.5 or ISO 1101, fixes the exact definitions, so check which standard your drawing follows.

Can I get the GD&T symbols and definitions as a PDF?

Yes, a GD&T symbols and definitions PDF is a useful shop reference because it keeps the symbols and their meanings in one printable file. A good PDF pairs each symbol with its name, its zone shape and the modifiers that apply. Confirm the PDF follows the same standard as your drawings before you rely on it.

Read next

Latest articles