Commercial Tire Rating Chart: Reading Ratings on the Sidewall

Learn to read commercial tire sidewall codes: size, load index, load range, ply rating and speed symbol, with charts that decode each marking.

9 min read1 viewsCommercial Tire Rating Chart: Reading Ratings on the Sidewall
— · 0 votes
Contents
  1. What a commercial tire rating tells you
  2. Reading the size code on commercial tires
  3. Load index and dual load ratings explained
  4. Load range and ply rating on commercial tires
  5. Speed symbol on a commercial tire sidewall
  6. Other sidewall markings on commercial truck tires
  7. Choosing replacements using the rating chart
  8. Commercial tire rating questions
  9. What does load range E mean on a tire?
  10. What is the difference between load index and load range?
  11. Why does a commercial tire have two load numbers?
  12. What does the C after a tire size mean?
  13. Do commercial tires have a treadwear rating?
  14. Can I put passenger tires on a commercial van?

A commercial tire rating is the group of sidewall codes stating load capacity, casing strength and top speed. The key parts are size, load index, load range or ply rating, and speed symbol. Read together, these codes show what weight and speed the tire is built to handle.

  • Commercial tires can show two load indexes, one for single and one for dual mounting.
  • Load range letters describe casing strength and replace the old count of real plies.
  • The speed symbol is the top sustained speed a tire handles at its full rated load.
  • A replacement tire should match or exceed the original load and speed ratings.
  • Light truck and commercial tires carry no UTQG treadwear grade, so a missing grade is normal.

What a commercial tire rating tells you

A commercial tire rating describes how much weight a tire carries and how fast it can run. The figures sit in a fixed order on the sidewall, molded into the rubber at the factory. Commercial truck tires add markings that passenger tires lack, such as dual load figures and load range letters. Reading them correctly prevents fitting a tire that is too weak for the vehicle.

Sidewall markings on a commercial tire fall into two groups: size codes and service codes. Size codes give width, profile, construction and rim diameter, the figures that decide fitment. The service description, made of the load index and speed symbol, sets what the tire can carry. The load range or ply rating sits nearby, often printed alone as a letter or word.

Commercial tire sidewall codes follow shared industry standards, so a code means the same across brands. A load index of 120 stands for the same weight on any tire that shows it. Speed symbols and load range letters work the same way. Comparing two commercial tires therefore starts with lining up their codes side by side.

Reading the size code on commercial tires

The size code on a commercial tire comes first and gives its dimensions and construction. In LT245/75R16, LT marks a light truck tire and 245 is section width in millimeters. The 75 is the aspect ratio, meaning sidewall height as a percentage of that width. R stands for radial construction, and 16 is the rim diameter in inches.

European-style van and light commercial sizes put a C after the rim size, as in 215/65R16C. The C letter means commercial, built for higher loads than a passenger tire of the same size. Some C tires also show a rating like 8PR, which stands for an 8 ply rating. On a van or pickup, a size with neither LT nor C marks a passenger tire.

Flotation sizes and heavy truck sizes use other formats that still carry the same information. A flotation size such as 33x12.50R15LT gives overall diameter, width and rim size in inches. Heavy commercial truck tires use sizes such as 11R22.5 or 295/80R22.5, mounted on 22.5-inch rims. Whatever the format, the service description follows the size and should be read next.

Load index and dual load ratings explained

The load index is a number that stands for the maximum weight one tire can carry. The number is a code, not a weight, and a chart converts it into kilograms or pounds. A load index of 116 equals 1,250 kilograms, or 2,756 pounds, per tire. Each step up in the index adds capacity, though not by a fixed amount.

Commercial tires often show two load indexes separated by a slash, such as 120/116. The first number is the rating for single mounting, and the second is for dual mounting. In 120/116, each tire carries 1,400 kilograms alone or 1,250 kilograms in a dual pair. Dual capacity per tire is lower because paired tires share weight unevenly on cambered roads.

The maximum load figure also appears in words elsewhere on the sidewall, with the matching inflation pressure. A marking such as MAX LOAD SINGLE and MAX LOAD DUAL lists weight at a stated cold pressure. Rated capacity applies only at that pressure, and an underinflated tire carries less. Load and pressure tables from the tire maker give exact figures for lower pressures.

Load indexKilograms per tirePounds per tire
1049001,984
1091,0302,271
1121,1202,469
1161,2502,756
1201,4003,086
1211,4503,197
1261,7003,748
1463,0006,614
1523,5507,826

Load range and ply rating on commercial tires

Load range is a letter on the sidewall that shows the strength of a commercial tire casing. Older bias tires counted actual cotton plies, and more plies meant a stronger tire. Modern radial tires use steel belts with fewer layers, so the ply rating expresses equivalent strength. A tire marked as a 10 ply rating may contain far fewer real layers.

A tire sidewall rating chart pairs each load range letter with its equivalent ply rating. Higher letters allow higher inflation pressure, which lets the tire carry more weight. Load range C equals a 6 ply rating, D equals 8, and E equals 10. Heavier commercial truck tires continue up the alphabet, to load range H and beyond.

Load range and load index describe related things but are not interchangeable. The load range sets the pressure ceiling, while the load index states the weight at that ceiling. Two tires with the same load range can have different load indexes in different sizes. Compare both values when checking whether a replacement matches the original.

Load rangePly rating equivalent
B4 ply rating
C6 ply rating
D8 ply rating
E10 ply rating
F12 ply rating
G14 ply rating
H16 ply rating
J18 ply rating

Speed symbol on a commercial tire sidewall

The speed symbol is a letter setting the top sustained speed a tire handles at rated load. The letter follows the load index, as in 120/116S, and forms the end of the service description. Commercial tires often carry lower speed symbols than passenger tires because they are built for load first. A low letter does not mean a weaker tire, only a different design priority.

Speed symbols use a fixed letter scale, where L stands for 120 km/h or 75 mph. N equals 140 km/h or 87 mph, and Q equals 160 km/h or 99 mph. R equals 170 km/h or 106 mph, while S equals 180 km/h or 112 mph. T, at 190 km/h or 118 mph, sits above S on the scale.

Some commercial tires show a second, alternative service description beside the main one. A marking such as 152/148M next to 154/150L allows more load at the lower speed. Only one description applies at a time, depending on how the vehicle is loaded and driven. A tire specialist can confirm which rating fits a given axle and duty.

Other sidewall markings on commercial truck tires

Commercial truck tire markings include more than size, load and speed codes. Words like TUBELESS, RADIAL or REGROOVABLE describe construction and permitted service work. A REGROOVABLE marking means the casing has extra rubber for a trained technician to cut new grooves. Regrooving a tire that lacks that marking is unsafe and should not be attempted.

The UTQG treadwear rating is a grading scheme used in some markets for passenger tires. UTQG, short for Uniform Tire Quality Grading, rates treadwear, traction and temperature resistance. Light truck and commercial tires sit outside that scheme, so their sidewalls carry no treadwear grade. Tread life on a commercial tire depends on compound, load, pressure, alignment and road surface.

Winter traction symbols also appear on the sidewalls of many commercial tires. M+S, short for mud and snow, describes a tread pattern with open grooves for loose surfaces. The three-peak mountain snowflake symbol marks a tire that passed a standardized snow traction test. A date code near the rim gives the week and year of manufacture as four digits.

Choosing replacements using the rating chart

A replacement commercial tire should match or exceed the original load index, load range and speed symbol. The tire placard or owner's manual lists the original size, ratings and recommended inflation pressure. A tire with a lower rating can overheat under load and fail. Dual load ratings matter too, since a dual rear axle uses the second load index.

Moving to a higher load range can work, but pressure needs to change with it. A stiffer casing needs pressure set for the actual load, using the tire maker's load table. Too little pressure cuts load capacity, while too much can wear the center of the tread. Wheels must also be rated for the higher pressure and load, which the rim marking shows.

Comparing commercial tires by size also means checking overall diameter and width, not only ratings. A different size can change speedometer reading, body clearance and the gap between dual tires. Dual assemblies need enough spacing so that the sidewalls do not touch under load. A qualified tire technician should confirm fitment, mounting and inflation on commercial vehicles.

Commercial tire rating questions

What does load range E mean on a tire?

Load range E means the tire has the strength of a 10 ply rating. The letter describes casing strength and allowed inflation, not the number of real layers. The exact weight a load range E tire carries depends on its size and load index.

What is the difference between load index and load range?

Load index states the maximum weight per tire, while load range states casing strength. The load index is a number converted with a chart, whereas load range is a letter. Both values should match or exceed the original when replacing commercial tires.

Why does a commercial tire have two load numbers?

A commercial tire has two load numbers because it can run single or in a dual pair. The first number is the single rating, and the second is the per-tire dual rating. The dual figure is lower since paired tires share weight unevenly.

What does the C after a tire size mean?

The C after a tire size means commercial, marking a van or light truck tire. A size like 215/65R16C is built for heavier loads than a 215/65R16 passenger tire. A C tire also shows its own load index and may list a ply rating.

Do commercial tires have a treadwear rating?

No, commercial and light truck tires do not carry a UTQG treadwear grade. The UTQG scheme covers passenger tires, so its grades are absent from commercial sidewalls. Tread life on commercial tires depends on load, inflation, alignment and driving conditions.

Can I put passenger tires on a commercial van?

No, a passenger tire should not replace a C or LT tire specified by the vehicle maker. Passenger tires have lower load capacity and softer casings than commercial tires of the same size. The placard shows the specified size and service description for choosing replacements.

Read next

Latest articles