Alternate Tire Size for 205/50R17

How to pick an alternate size for 205/50R17: match tire diameter and overall height, respect rim width and load index, and use plus one sizing safely.

3 min read1 views
— · 0 votes
Contents
  1. Reading the 205/50R17 markings
  2. Matching tire diameter and height
  3. Checking rim width and ratings
  4. Questions About 205/50R17 Alternates
  5. What is an alternate tire size for 205/50R17?
  6. Does an alternate size change the speedometer reading?
  7. Can I fit a 205/50R17 on a different rim width?
  8. What is plus one sizing for a 205/50R17?

An alternate tire size for 205/50R17 is a size that keeps the same overall height and load capacity while changing width or aspect ratio, so the wheel still fits and the speedometer stays close. The numbers on the sidewall give you the tools to compare: section width, aspect ratio, rim diameter and the resulting sidewall and tire diameter. Any substitute also has to sit on a rim width the tire maker approves and carry at least the original load index and speed rating. This page shows how to work those figures out and where a trained tire specialist should confirm the fit.

Reading the 205/50R17 markings

The 205/50R17 marking states a section width of 205 millimeters, an aspect ratio of 50 and a rim diameter of 17 inches. The 205/50R17 sidewall height is half of the section width, so the sidewall measures about 102.5 millimeters. Doubling that sidewall and adding the 17 inch rim gives the tire diameter, which sets the overall height of the wheel and tire. Those figures are the starting point for any alternate size you compare.

Matching tire diameter and height

A good alternate size keeps the tire diameter and overall height close to the original, so gearing and the speedometer reading stay near their marks. Width and aspect ratio trade against each other: a wider tire needs a lower aspect ratio to hold the same diameter, and a narrower tire needs a higher one. Calculate the diameter of each candidate before you commit, because a small change in sidewall adds up over the whole wheel. The closer the overall height, the fewer adjustments the vehicle needs.

Checking rim width and ratings

Rim width limits which section widths a tire can safely sit on, and the tire maker publishes the approved range for each size. A 205/50R17 fits a narrower rim than a wider alternate, so check the range before you buy and confirm the wheel you have. The load index and speed rating of the alternate must meet or exceed the original figures for the vehicle. Plus one sizing, which moves to a larger rim with a lower aspect ratio, also depends on rim width and clearance, so treat it as a separate check.

Questions About 205/50R17 Alternates

What is an alternate tire size for 205/50R17?

An alternate tire size for 205/50R17 is one that keeps a similar tire diameter and overall height while changing width or aspect ratio. A 215/45R17 is a narrower step in sidewall with a wider tread, and a 195/55R17 is a narrower tire with a taller sidewall. Compare the calculated diameter of each option before you choose one. A tire specialist can confirm the fit on your rim and vehicle.

Does an alternate size change the speedometer reading?

An alternate size changes the speedometer reading when its tire diameter differs from the original. A taller tire rolls farther per turn and shows a lower speed than actual, while a shorter tire shows a higher speed. Keeping the overall height close to the 205/50R17 figure limits that error. Check the diameter difference before you rely on the gauge.

Can I fit a 205/50R17 on a different rim width?

A 205/50R17 fits only rim widths inside the range the tire maker approves for that size. The approved range depends on the tire model, so read the maker's specification rather than assuming a number. A rim outside the range can distort the sidewall and affect handling. Have a trained tire specialist confirm the rim width before mounting.

What is plus one sizing for a 205/50R17?

Plus one sizing for a 205/50R17 moves to a rim one inch larger and lowers the aspect ratio to keep the tire diameter near the original. The wider rim needs a matching section width and a sidewall short enough to hold the overall height. Rim width, clearance and load index all need checking at the new size. A tire specialist should verify the fit before you buy.

Read next

Latest articles