Yokohama Tire Replacement Age

Learn how Yokohama tire age guidance works, where the DOT date code sits on the sidewall, and what to weigh when deciding on replacement.

3 min read1 views
— · 0 votes
Contents
  1. Where the date code sits
  2. What manufacturer guidance says
  3. Checks beyond the date
  4. Yokohama Tire Age Questions
  5. How do I find the age of a Yokohama tire?
  6. Does Yokohama set a replacement age for its tires?
  7. Should an old tire with good tread be replaced?
  8. Can storage change when a Yokohama tire needs replacing?

Yokohama tire replacement age is a judgment call that starts with the date molded into the sidewall, not with the tread alone. Yokohama stamps a DOT date code on every tire it sells, and that code tells you when the tire was made. Age is one input in a retirement decision that also considers wear, damage and storage. The sections below explain the code, the manufacturer guidance and the checks a technician makes.

Where the date code sits

A DOT date code appears on the sidewall as the final group of digits in the DOT marking. The code ends with four numbers, where the first two give the week and the last two give the year of manufacture. A tire built in the tenth week of a given year shows 10 followed by that year. Read the code on the outward-facing sidewall, since some tires carry the full DOT stamp on one side only.

What manufacturer guidance says

Yokohama tire age guidance treats the date code as the starting point for retirement, not a countdown clock. Tire manufacturers generally describe a service limit measured from the date of manufacture, and that limit applies even when tread remains deep. The guidance assumes normal use and proper storage, so a tire used hard or stored poorly can reach its limit sooner. Follow the figure Yokohama publishes for its own products rather than a number from another brand.

Checks beyond the date

Tread depth, cracking and damage decide retirement alongside the build date on a Yokohama tire. Sidewall cracks, bulges, punctures that cannot be repaired and uneven wear all point to replacement regardless of age. Storage matters too, because heat, sunlight and ozone speed up rubber degradation. A trained technician should inspect any tire whose condition you doubt, and a damaged tire should come off the vehicle before it is driven.

Yokohama Tire Age Questions

How do I find the age of a Yokohama tire?

The age of a Yokohama tire comes from the DOT date code molded into its sidewall. The last four digits of that code give the week and year of manufacture, so the code itself dates the tire. Check both sidewalls if you cannot find the full stamp on the outward face.

Does Yokohama set a replacement age for its tires?

Yes, Yokohama publishes tire age guidance that sets a service limit from the date of manufacture. That limit applies even when the tread still looks deep, because rubber changes with time. Use the figure Yokohama states for the tire model you own rather than a general rule from elsewhere.

Should an old tire with good tread be replaced?

An old tire can need replacement even with tread left, because age and condition both count. Cracks, bulges and hard rubber reduce the margin of safety that tread depth alone does not show. A technician can inspect the tire and tell you whether it has reached its limit.

Can storage change when a Yokohama tire needs replacing?

Storage does change retirement timing for a Yokohama tire, since heat, sunlight and ozone age rubber faster. A tire kept cool, dry and out of direct sun degrades more slowly than one left exposed. The date code still caps the service life whatever the storage conditions.

Latest articles