Which Tire Is Bigger: Comparing Sidewall Numbers
Learn how to compare two tires by reading the sidewall size code, section width, aspect ratio and rim diameter to judge overall diameter.
Contents
- Decoding the sidewall size code
- Calculating overall diameter
- Comparing two sizes step by step
- Questions About Tire Size Comparison
- Which tire is bigger when the sidewall numbers differ?
- Does a higher aspect ratio always mean a taller tire?
- What does the first number on a tire sidewall mean?
- Can I compare tire sizes without special tools?
Which tire is bigger comes down to reading the sidewall size code and doing a little arithmetic on section width, aspect ratio and rim diameter. The sidewall prints a size like 225/45R17, and each part of that string feeds the overall diameter. Once you know what each number means, you can compare any two tires without special tools. This page explains the code and walks through the comparison step by step.
Decoding the sidewall size code
A sidewall size code carries three numbers that describe the tire's basic geometry. The first number is the section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, a percentage of the section width that gives the sidewall height. The letter R marks radial construction, and the last number is the rim diameter in inches.
Calculating overall diameter
Overall diameter is the figure that decides which tire is bigger, and you build it from the code. Convert the rim diameter from inches to millimeters, then add twice the sidewall height. Sidewall height equals the section width multiplied by the aspect ratio divided by one hundred. A taller sidewall or a larger rim both push the overall diameter up.
Comparing two sizes step by step
To compare two tires, calculate the overall diameter of each and set the results side by side. A wider section width adds sidewall height only in proportion to the aspect ratio, so a wide tire with a low ratio can still be shorter. Remember that the size code describes the tire, while the wheel it mounts on must match the rim diameter. Check clearance around the fender and suspension before fitting a larger overall diameter.
Questions About Tire Size Comparison
Which tire is bigger when the sidewall numbers differ?
The bigger tire is the one with the larger overall diameter, not simply the larger sidewall number. Calculate each tire's overall diameter from section width, aspect ratio and rim diameter. The tire with the greater total wins the comparison. A low aspect ratio can shrink a wide tire, so never judge by one number alone.
Does a higher aspect ratio always mean a taller tire?
A higher aspect ratio means a taller sidewall for the same section width, but the overall diameter also depends on the rim. Aspect ratio is a percentage of section width, so it scales with how wide the tire is. Compare the full size code before deciding which tire is taller. The rim diameter finishes the calculation.
What does the first number on a tire sidewall mean?
The first number in a size code is the section width in millimeters, measured across the tire's widest point. Section width feeds into sidewall height through the aspect ratio. A larger first number does not by itself make the tire bigger overall. It only sets the base for the other numbers.
Can I compare tire sizes without special tools?
Yes, you can compare tire sizes with the sidewall code and simple arithmetic. Read section width, aspect ratio and rim diameter, then compute overall diameter for each tire. No gauge or machine is needed for the comparison. A trained technician should still confirm fitment and clearance on the vehicle.