Where to Buy Hub-Centric Rings Near You
Learn where to find hub-centric rings locally, how to match hub ring sizes to your wheel bore, and what to bring so the parts counter gets it right.
Contents
- What hub-centric rings do for a wheel
- Read the two sizes before you shop
- Auto parts stores that stock rings
- Wheel shops and tire dealers
- Check fitment when you buy
- Ordering a size that is not on the shelf
- Install the ring with the wheel
- Questions about buying hub-centric rings
- Does AutoZone sell hub-centric rings?
- Can I get hub-centric rings at O'Reilly Auto Parts?
- Where can I find hub-centric rings near me?
- What sizes do I need for hub-centric rings?
- Are hub-centric rings for aftermarket wheels sold in sets?
- Can I fit hub-centric rings myself?
You buy hub-centric rings wherever wheels and wheel accessories are sold: auto parts stores such as AutoZone and O'Reilly Auto Parts, dedicated wheel shops, and tire dealers that fit aftermarket wheels. Local availability depends on the ring size you need, so measure the hub and the wheel bore before you shop. A store near you may stock a size in-store or order it to the counter.
- Hub-centric rings fill the gap between the wheel bore and the car hub so the wheel centers on the hub.
- Measure the hub diameter and the wheel center bore before you ask for a ring.
- Auto parts chains can sell rings, but in-store stock depends on the individual location.
- Local wheel and tire shops fit rings with the wheels they sell and often keep sizes on hand.
- Bring both measurements to the counter so the ring matches on both sides.
What hub-centric rings do for a wheel
A hub-centric ring is a spacer ring that centers an aftermarket wheel on the car hub. Aftermarket wheels often have a larger center bore than the car hub, which leaves a gap around the hub. The ring takes up that gap so the wheel sits concentric with the hub.
Centering matters because the lug nuts hold the wheel against the hub face. A wheel that hangs off-center can vibrate and put uneven load on the studs. The ring locates the wheel before the nuts are tightened, so the studs carry clamping force rather than the weight of an offset wheel.
Rings come in metal, often aluminum, and in plastic or polycarbonate. Metal rings hold their shape through heat and repeated wheel changes. Plastic rings cost less and suit light duty use, though they can deform if a wheel is fitted hot or pressed on crooked. The ring does not change the bolt pattern or the offset.
Read the two sizes before you shop
A hub-centric ring is sized by the car hub diameter and the wheel center bore, written as hub size to wheel size. A ring for a car with a smaller hub and a wheel with a larger bore is listed with both numbers. Get both figures right, or the ring will not seat.
Measure the car hub with a caliper across the raised center section of the brake rotor or hub flange. Measure the wheel center bore across the opening in the back of the wheel. Compare the two; the difference is the wall thickness the ring must fill.
Wheel and hub sizes are often molded or stamped on the parts, and the wheel box may list the bore. Recording the figures in millimeters keeps the search simple at any counter. A ring that is too small will not slip over the hub, and one that is too large will not hold the wheel centered.
Auto parts stores that stock rings
Auto parts chains sell hub-centric rings as a wheel accessory, and AutoZone and O'Reilly Auto Parts both list them through their stores and online catalogs. Store stock varies by location, so a ring that appears online may sit on a shelf elsewhere. Calling the counter with your sizes saves a trip.
The person at the parts counter can match a ring to your car and wheel if you give both numbers. Chain stores also order rings to the store for pickup, which widens the range beyond what the shelf holds. Ask whether the ring is in stock locally or needs an order.
Some chain locations carry a general selection of rings in a few sizes. Others special-order every ring, so the answer depends on the individual store. Have the year, make and model of the car ready, plus the wheel brand and bore if you know it.
Wheel shops and tire dealers
Local wheel shops and tire dealers that fit aftermarket wheels deal with hub-centric rings as part of a wheel install. These shops keep rings in the sizes that match the wheels they sell and can match a ring to a wheel on the spot. They also have the tools to check fitment before the wheel goes on.
A wheel shop can measure your hub and wheel bore if you are unsure of the figures. Shops that balance and mount wheels know the ring sizes their wheel lines need. This makes a dedicated wheel shop a strong stop when a chain store does not stock your size.
Tire dealers that sell custom wheels often include rings with a wheel purchase or sell them separately. Ask whether the ring is included before you buy a set of wheels, since the ring size must match both the car and the wheel. A shop that mounts the wheels can confirm the ring seats fully.
Check fitment when you buy
The ring must slip over the car hub and press into the wheel bore with no play. Try the ring on the hub first, then seat it in the wheel. A ring that rocks, binds or leaves a gap is the wrong size, even if the label matches your numbers.
Check that the ring sits flush against the hub face and that the wheel mounts squarely. The ring should not protrude past the wheel mounting surface, or the wheel will not sit flat. Rings are sold in pairs or sets because wheels are fitted in sets.
A ring that needs force to fit can crack or distort, so do not hammer one into place. Fit the ring by hand and stop if it does not seat. Where the wheel or hub needs work beyond a ring, a trained technician should check the fitment.
Ordering a size that is not on the shelf
When a local store lacks your ring size, the counter can order it from the supplier catalog. Auto parts chains and wheel shops both place orders against the hub and wheel measurements. Ordering takes the guesswork out of matching a size the shelf does not hold.
Order the ring by both numbers, hub size first and wheel bore second, so the supplier sends the correct part. Confirm the material and whether the price is for one ring or a set. Keep the order slip in case the ring needs an exchange.
If a shop cannot source the size, a machined adapter ring can be made to measure by a machine shop that works on wheels. That route costs more and takes longer, and it should be measured by someone who fits wheels regularly.
Install the ring with the wheel
A hub-centric ring seats on the car hub before the wheel goes on, or it clips into the back of the wheel. Either way, clean the hub face and the wheel bore first so grit does not hold the ring off-center. A dirty surface can keep a wheel from sitting flat.
Fit the ring by hand, then lift the wheel onto the hub and start the lug nuts by hand. Tighten the nuts in a cross pattern with a torque wrench to the vehicle maker's figure. The ring centers the wheel and the nuts hold it.
Metal rings stay on the hub when the wheel comes off, and plastic rings may stay in the wheel. Check the ring each time a wheel is removed and replace any that is cracked, melted or loose. A damaged ring should not go back on the car.
Questions about buying hub-centric rings
Does AutoZone sell hub-centric rings?
Yes, AutoZone sells hub-centric rings as a wheel accessory through its stores and online catalog. In-store availability depends on the individual location, so call the counter with your hub and wheel bore sizes first. The store can also order a ring to the counter if it is not on the shelf.
Can I get hub-centric rings at O'Reilly Auto Parts?
Yes, O'Reilly Auto Parts carries hub-centric rings in its catalog and through its stores. Stock at a given location varies, so give the counter the hub diameter and wheel center bore before you drive over. The store can order a size it does not keep on hand.
Where can I find hub-centric rings near me?
Look at auto parts stores, local wheel shops and tire dealers that fit aftermarket wheels. Wheel shops are the strongest stop when you need a size matched to a wheel they sell. Call ahead with your measurements to confirm the ring is in stock locally.
What sizes do I need for hub-centric rings?
You need the diameter of the car hub and the center bore of the wheel, both in millimeters. The ring is listed as hub size to wheel size, so both figures must be right. A caliper gives the most reliable reading on the hub and the wheel.
Are hub-centric rings for aftermarket wheels sold in sets?
Hub-centric rings for aftermarket wheels are sold as single rings, pairs or full sets of four. Check the listing or ask the counter how many rings the price covers. A car needs one ring per wheel, so a set of four covers all four wheels.
Can I fit hub-centric rings myself?
Yes, fitting hub-centric rings is a hand job when the ring size is correct. Clean the hub and wheel bore, seat the ring by hand and torque the lug nuts to the vehicle maker's figure. A ring that will not seat by hand is the wrong size, and a trained technician should check the fitment.