# Wheel Terminology Glossary

A plain guide to wheel terminology: the difference between a wheel and a rim, rim width, offset, backspacing, bolt pattern, runout and other fitment terms.

This wheel terminology glossary explains the words you meet when you read a wheel size, compare a replacement rim, or check tire fitment. Each entry answers a search plainly, from what a rim is to what wheel true means. The terms are grouped so you can follow a size from the tire sidewall to the mounting face. 

## Wheel and rim are not the same 

A wheel is the whole round assembly that carries the tire and bolts to the hub. The rim is only the outer edge of that wheel, the part the tire bead sits against and seals on. People say rim when they mean the complete wheel, and that habit causes confusion in shops and listings. Use wheel for the assembly and rim for the edge, and a parts counter will understand you. 

## Rim width and rim diameter 

Rim width is the distance between the inner faces of the rim flanges, where the tire bead seats. Rim diameter is the diameter of that bead seat circle, not the outside of the wheel. Both figures appear in a size such as 17x8, where the first number is diameter and the second is width. A tire must match both, and the sidewall marking states the wheel size it is built for. 

## Offset and backspacing explained 

Wheel offset is the distance from the mounting face to the wheel centerline, measured in millimeters and signed positive or negative. Backspacing is the distance from the mounting face to the inner edge of the rim, measured in inches. Offset and backspacing describe the same position in different ways, so a change in one always moves the other. Bolt pattern and center bore must also match the hub before a wheel sits correctly. 

## Questions about wheel terms 

### Is a rim a wheel? 

A rim is not a wheel in strict terminology, because the rim is only the outer edge that holds the tire bead. The wheel is the complete assembly, and it includes the rim, the disc and the center. Many people call the whole wheel a rim, so check which meaning a seller uses. When you buy, ask for the full wheel size to avoid a mismatch. 

### What is rim width? 

Rim width is the measurement between the inner faces of the rim flanges where the tire bead sits. Rim width decides how a tire sits and how its sidewall is shaped, so it must fall within the range the tire maker lists. Width is the second number in a size such as 17x8, given in inches. Measure the bead seat, not the outer lip, for a true figure. 

### What does wheel true mean? 

Wheel true means the wheel spins without side-to-side or up-and-down wobble, so the rim runs evenly around its axis. A bent rim loses that condition and shows runout, which is measured as lateral runout across the face and radial runout around the tread. Truing a wheel corrects that deviation on the machine. A badly bent or cracked rim needs a trained specialist, not a roadside fix. 

### What are wheel covers called? 

Wheel covers are also called hubcaps, and the terms are used for the trim piece that clips over a steel wheel. A wheel cover is a full trim cover, while a hubcap can mean a smaller cap over the center hub. Both are cosmetic and do not change offset, bolt pattern or rim width. Check the wheel size and clip style before buying a replacement cover.
