# What Rim Depth Is: Definition and Explanation

Rim depth explained in plain terms: how the measurement is taken, what a shallow or deep-section rim looks like, and how the rim cross-section affects a wheel build.

Rim depth is the distance from the rim edge where the tire seats down to the deepest part of the rim well, measured across the rim profile. The number describes how tall the sidewall of the rim is, which is why a rim is called shallow-section or deep-section. This page explains how that measurement is taken and what it changes on a wheel. 

## How the measurement is taken 

Rim depth is measured from the brake track or the hook edge down to the lowest point inside the rim. A caliper or a depth gauge sits across the top of the rim and reaches down to the rim well floor. The result is a single figure in millimeters that describes the rim cross-section at that point. Measurement at one spot assumes the rim is uniform around its circumference. 

## Shallow and deep-section profiles 

A shallow-section rim has a low sidewall, so the spoke nipple sits close to the tire bed. A deep-section rim has a tall sidewall that stands well above the tire bed and adds material around the spoke holes. The rim profile also changes where the spoke attaches, which affects how the wheel is built. Depth alone does not tell you the shape of the outer surface. 

## Depth is not the same as width 

Rim depth and rim width describe two different axes of the same rim cross-section. Width is measured across the rim from bead to bead, while depth runs down from the edge to the well. Two rims can share a width and differ greatly in depth, and the reverse is also true. A tire must match the width and bead seat, not the depth figure. 

## Questions about rim depth 

### What is rim depth? 

Rim depth is the vertical distance from the rim edge down to the floor of the rim well. It is a measurement of the rim itself, taken without a tire fitted. The figure tells you whether the rim has a shallow or a tall sidewall. 

### How is rim depth explained in simple terms? 

Rim depth explained simply is the height of the rim sidewall above the tire bed. A shallow rim looks flat in profile, and a deep rim looks tall like a box section. The rim cross-section shows both the depth and the width at once. 

### Does rim depth have to match the tire? 

Rim depth does not need to match the tire, because the tire seats on the bead and the width, not on the depth. The tire must fit the bead seat diameter and the rim width for a safe fit. Depth only changes the appearance and the spoke position. 

### Where is the rim well in relation to the depth? 

The rim well is the lowest part of the rim cross-section, and the depth measurement ends at its floor. Spoke nipples sit in the well on many rims, below the tire bed. A deeper rim therefore puts more material between the tire and the spokes.
