What Is a Wheel Bolt Pattern

Learn what a wheel bolt pattern is, how to read numbers like 5x100 and 6x139.7, and how bolt circle diameter and lug count guide wheel fitment.

8 min read1 views
— · 0 votes
Contents
  1. The bolt pattern in plain terms
  2. How to read bolt pattern notation
  3. Lug count and what it tells you
  4. Bolt circle diameter and pitch circle diameter
  5. Stud pattern and lug pattern: the same thing
  6. Check the pattern against your hub
  7. Where bolt patterns go wrong
  8. Wheel bolt pattern questions
  9. What does a 5x100 bolt pattern mean?
  10. What do the measurements of 6x139.7 represent?
  11. Is PCD the same as bolt pattern?
  12. Do tires have a bolt pattern?
  13. Can I use an adapter to change my bolt pattern?
  14. Where do I find the bolt pattern of my wheel?

A wheel bolt pattern is the arrangement of the lug holes on a wheel, written as the number of lugs followed by the diameter of the circle they sit on. The first number counts the lug holes and the second gives that bolt circle diameter, also called pitch circle diameter or PCD. Matching the pattern to your wheel hub is what lets the wheel seat and the lug nuts or bolts tighten correctly.

  • Read a bolt pattern as lug count first, then bolt circle diameter, as in 5x100 or 6x139.7.
  • The number after the x is the diameter of the circle through the lug hole centers, not the spacing between two holes.
  • Two wheels can share a lug count but still differ in bolt circle diameter, so both numbers must match.
  • PCD, pitch circle diameter, bolt circle diameter and stud pattern all describe the same measurement.
  • A pattern that does not match the hub cannot be fixed by tightening the lugs harder.

The bolt pattern in plain terms

A wheel bolt pattern describes where the lug holes sit on the wheel face, measured from the wheel hub mounting surface. Each hole is drilled at the same distance from the center of the wheel, so the hole centers form a circle. The pattern tells a buyer or technician whether a wheel can be mounted on a given hub.

The bolt pattern is one part of fitment, not the whole of it. Center bore, offset, width and diameter also decide whether a wheel sits correctly on the car. A wheel can share a bolt pattern with another and still fail to fit because one of those other dimensions is wrong.

The pattern is stamped on the wheel, printed on a label or listed in a wheel specification. Checking the pattern on the wheel hub of the vehicle gives the reference figure for any replacement wheel. A wheel with the wrong pattern does not seat on the hub, so the studs or bolts cannot clamp it evenly.

How to read bolt pattern notation

Bolt pattern notation puts the lug count first and the bolt circle diameter second, separated by an x. A 5x100 bolt pattern meaning is five lug holes on a circle with a diameter of 100 millimeters. The same reading applies to a 6x139.7 notation, which is six holes on a 139.7 millimeter circle.

The number after the x is a diameter, so it passes through the center of the circle rather than from hole to hole. Metric patterns give this diameter in millimeters, and inch-based patterns give it in inches. Both forms describe the same geometry, and a conversion may be needed when comparing the two.

Lug count and bolt circle diameter must both match the hub. A five-lug wheel and a six-lug hub cannot be interchanged at all, and two five-lug wheels can still differ if their circles are sized differently. The notation is complete only when both figures are read together.

NotationLug countBolt circle diameter
5x1005100 mm
5x114.35114.3 mm
6x139.76139.7 mm
4x1004100 mm

Lug count and what it tells you

Lug count is the number of bolts or studs that hold the wheel to the hub, and it appears as the first digit of the pattern. A five-lug wheel has five lug holes and needs five matching fasteners on the hub. Lug count sets the clamping layout that keeps the wheel seated under load.

A higher lug count spreads the clamping force over more fasteners, which suits heavier vehicles and larger wheels. A lower count keeps the wheel lighter and simpler, which suits smaller cars. The right count for a vehicle is set by its hub design, not by preference.

Count the lug holes on the wheel and the studs or bolt holes on the hub before ordering anything. A mismatch in lug count is visible at a glance once the wheel is off the car. Reading the count first narrows the search before the diameter is checked.

Bolt circle diameter and pitch circle diameter

Bolt circle diameter is the diameter of the circle that passes through the center of every lug hole. Pitch circle diameter, shortened to PCD, is another name for the same measurement. What is PCD bolt pattern is a question with a short answer: it is the second number in the pattern and the size of that circle.

Measuring PCD on a wheel with an even number of holes is simple, because opposite holes sit across the circle. With an odd number of holes, no two holes sit directly opposite, so the diameter is found from the distance between adjacent holes and the lug count. A caliper and a little geometry settle the figure.

A PCD that is slightly too small or too large stops the wheel from sitting flat on the hub. Forcing a wheel onto a hub with a different PCD damages the studs, the hub face or both. The measurement has to match the hub exactly, with no allowance for tightening.

Stud pattern and lug pattern: the same thing

Stud pattern and lug pattern are names for the wheel bolt pattern, and they read the same way. A wheels stud pattern guide and a wheel lug pattern guide describe the lug count and bolt circle diameter of a wheel. The wheel pattern meaning does not change with the name used.

Regional wording shifts the label, and metric and inch notation shifts the units. A stud pattern reference guide lists vehicles by both figures, so the reader can compare without converting by hand. What is a bolt pattern on tires is really a question about the wheel, since the tire itself carries no lug holes.

Use one name consistently when comparing wheels and hubs, so a figure is not read twice by mistake. Write the pattern as lug count and diameter together, for example 5x114.3. Store that figure with the vehicle details for the next wheel purchase.

Check the pattern against your hub

A wheel bolt pattern guide answers one question: which pattern a wheel or a hub carries. Start with the vehicle, find its hub pattern, then compare the wheel you intend to fit. A printed guide and a wheel bolt pattern guide pdf work the same way, provided the figures match the hub.

Verify the pattern on the car rather than trusting a listing alone, because previous owners may have changed parts. Count the studs or bolt holes on the hub and measure the bolt circle with a caliper. Compare the result with the wheel marking before any fastener is loosened.

Where the pattern does not match, the safe answer is a different wheel rather than an adapter. Adapters and spacer plates change offset and load paths, and a poor one can fail in service. A trained tire technician should judge whether any adapter is suitable for a given vehicle.

  • Read the lug count on the hub and on the wheel.
  • Measure the bolt circle diameter with a caliper.
  • Compare both figures with the wheel specification.
  • Confirm center bore and offset as well as the pattern.
  • Have a trained technician check any adapter before use.

Where bolt patterns go wrong

The costliest bolt pattern mistake is buying a wheel with the right lug count and the wrong circle diameter. The wheel may look close enough to fit, yet the holes will not line up with the studs. Visual similarity between two five-lug wheels hides this difference.

A second mistake is reading the diameter in the wrong unit. A pattern given in inches and a pattern given in millimeters describe different circles unless converted correctly. Mixing the two units can turn a correct match into a wrong one on paper.

A third mistake is treating the pattern as the only fitment figure. Center bore, offset and wheel width still decide whether the wheel clears the brakes and sits under the body. A correct bolt pattern alone does not confirm that a wheel fits a vehicle.

Wheel bolt pattern questions

What does a 5x100 bolt pattern mean?

A 5x100 bolt pattern means five lug holes on a bolt circle with a diameter of 100 millimeters. The 5 is the lug count and the 100 is the pitch circle diameter. A wheel with this pattern fits only a hub with the same five-lug, 100 millimeter layout.

What do the measurements of 6x139.7 represent?

The measurements of a 6x139.7 pattern represent six lug holes on a bolt circle 139.7 millimeters across. The figure is common in metric notation for a six-lug hub, and 139.7 millimeters converts to 5.5 inches. The wheel fits a hub with the same six-lug circle.

Is PCD the same as bolt pattern?

Pitch circle diameter is the second half of a bolt pattern, not a separate figure. A full bolt pattern pairs the lug count with the PCD, as in 5x114.3. The term PCD wheel measurement refers to that diameter alone.

Do tires have a bolt pattern?

No, tires do not have a bolt pattern, because the lug holes sit in the wheel rather than the tire. Tire dimensions come from the sidewall markings, such as width, aspect ratio and rim diameter. The bolt pattern belongs to the wheel that carries the tire.

Can I use an adapter to change my bolt pattern?

An adapter can change the pattern in theory, but it also changes offset and adds a joint between wheel and hub. A poorly made or wrongly fitted adapter can fail and cause a wheel to come loose. A trained tire technician should decide whether any adapter is appropriate for a given vehicle.

Where do I find the bolt pattern of my wheel?

The bolt pattern of a wheel is marked on the wheel, often near the hub or on the back of a spoke. A specification sheet for the wheel lists it as well. If no marking is readable, count the lug holes and measure the bolt circle with a caliper.

Read next

Latest articles