# Using Discount Tire's Tire Comparison Tool

Learn how Discount Tire's tire comparison tool reads sidewall numbers, compares overall diameter and sidewall size, and helps with tire size conversion.

Discount Tire's [tire comparison tool](/articles/tire-size-calculator-diameter-comparison-material-44527/) lets you enter two tire sizes and see how their dimensions differ before you change anything on a vehicle. The tool works from the numbers molded on the sidewall, so it compares geometry rather than tread or brand. Reading those numbers correctly first makes every comparison on the page meaningful. 

## Reading the sidewall numbers first 

Each tire size on the sidewall is written as a width, an aspect ratio and a wheel diameter, such as 225/45R17. The first number is the section width in millimeters, and the second is the sidewall height as a percentage of that width. The letter gives the construction type and the final number is the wheel diameter in inches. A tire size lookup starts with these three figures, because the tool has nothing to compare without them. 

## What the comparison calculates 

The tire comparison tool turns sidewall numbers into overall diameter, sidewall height and circumference for each size. Overall diameter is the full height of the mounted tire, measured from the ground to the top of the tread. Sidewall size comparison shows how much rubber sits between the rim and the road on each option. These calculated figures come from the size code and the wheel diameter you supply. 

## Where the size calculator helps 

A tire size calculator is useful when you plan a change from the size printed on the door placard. The tool shows whether a new size keeps the overall diameter close to the original, which affects speedometer readings and clearance. It also supports tire size conversion between the metric code and inch-based flotation sizes used on light trucks. Check the result against the vehicle's placard before buying, and have a trained technician confirm fitment where clearance is tight. 

## Questions about the tire comparison tool 

### What does the Discount Tire comparison tool measure? 

The Discount Tire comparison tool measures the geometric dimensions that follow from a [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/). It reports overall diameter, sidewall height and related figures for two sizes side by side. The numbers come from the sidewall code and the wheel diameter, not from a physical measurement of a tire. Tread pattern and rubber compound are outside what a dimension comparison can show. 

### Can I use the Discount Tire size calculator for a different wheel size? 

A Discount Tire size calculator accepts the wheel diameter as part of each size code, so you can compare a tire built for one rim against a tire built for another. The result shows how the change in rim size and sidewall height shifts the overall diameter. Keeping that diameter close to the original protects speedometer accuracy and clearance. A trained technician should confirm brake and suspension clearance before you commit to a different wheel. 

### How do I do a tire size conversion with these tools? 

Tire size conversion means translating a metric size into an inch-based flotation size, or the reverse, so both can be compared. Discount Tire tools work from the same sidewall figures, so you convert the code and then compare dimensions. The conversion is approximate, because the two naming systems describe a tire in different ways. Use the calculated overall diameter as the reference point for the comparison. 

### Is the tool's result the same as measuring my tire? 

The tool's result is a calculated figure from the size code, not a measurement taken from your tire. A worn tire, inflation pressure and load all change the height you measure on the vehicle. Discount Tire measurement tools give you a reference to compare sizes, and a physical check confirms how a mounted tire actually sits. Use both when clearance is close.
