Used Tire Size 215/55R17

Read the 215/55R17 tire size from the sidewall, work out its overall diameter and width, and check a used tire for fitment before you mount it.

3 min read3 viewsUsed Tire Size 215/55R17
— · 0 votes
Contents
  1. Reading the 215/55R17 sidewall markings
  2. Working out the overall diameter
  3. Checking a used tire for fitment
  4. Questions about 215/55R17 tires
  5. What does 215/55R17 mean on a tire?
  6. What is the overall diameter of a 215/55R17 tire?
  7. Can I use a used 215/55R17 tire on my car?
  8. Does a used tire keep the same size as a new one?

Used tire size 215/55R17 is a metric size whose three numbers describe tread width, sidewall height as a share of that width, and wheel diameter. This page explains what each figure means, how the geometry adds up, and what to inspect on a used tire before you fit it to your wheel.

Reading the 215/55R17 sidewall markings

The 215 in 215/55R17 is the tire width in millimeters, measured across the tread section. The 55 is the aspect ratio, the sidewall height expressed as a percentage of that width. The R stands for radial construction, and 17 is the wheel diameter in inches that the tire is built to seat on.

Working out the overall diameter

The overall diameter of 215/55R17 comes from the wheel plus two sidewalls, so the metric and inch units have to be reconciled. A 55 aspect ratio on a 215 mm width gives a sidewall height of about 118 mm, and a 17 inch wheel is roughly 432 mm. Adding two sidewalls to the wheel gives the diameter, which matters when you compare against the size the vehicle expects.

Checking a used tire for fitment

A used tire fitment check starts with the size on the sidewall matching the size your wheel and vehicle call for. Inspect the bead area for damage, look for cracks or bulges in the sidewall, and check the tread depth across the width. A trained tire specialist should mount and balance the tire, because a damaged bead or hidden sidewall injury can fail under load.

Questions about 215/55R17 tires

What does 215/55R17 mean on a tire?

The 215/55R17 marking gives the tire width in millimeters, the aspect ratio, and the wheel diameter. The 215 is the section width, the 55 is the sidewall height as a percentage of that width, and the 17 is the wheel size in inches. The letter R between the last two numbers indicates radial construction.

What is the overall diameter of a 215/55R17 tire?

The overall diameter of 215/55R17 works out from the sidewall height and the wheel size together. A 55 aspect ratio on a 215 mm width gives a sidewall of about 118 mm, and the 17 inch wheel is roughly 432 mm. Doubling the sidewall and adding the wheel gives a diameter in the region of 668 mm, though published figures vary slightly between tire models.

Can I use a used 215/55R17 tire on my car?

A used 215/55R17 tire fits only if your vehicle and wheel call for that size and the tire passes inspection. Check the sidewall for cracks, bulges and bead damage, and measure tread depth across the width. Have a trained specialist confirm the condition and mount it, since some damage is not visible from the outside.

Does a used tire keep the same size as a new one?

A used 215/55R17 tire keeps the size marked on its sidewall, because the size is set by the mold at manufacture. Tread wear reduces the diameter slightly as the tread depth drops, which changes the rolling circumference a little. The width and wheel diameter stay as marked.

Read next

Latest articles