# Turo Tire Inspection Form for Rental Vehicles

What a Turo tire inspection form records, how tread depth and sidewall readings are logged, and how pre-trip and post-trip checks document tire condition.

A Turo tire inspection form is a written record of a rental vehicle's tires, completed by the host before and after each trip. It captures tire tread depth, sidewall readings and visible damage so that wear or harm can be documented against a specific rental period. The form supports damage documentation for a Turo host and gives the renter a clear picture of tire condition at handover. The numbers on the sidewall and the tread gauge reading form the core of what gets written down. 

## What the form records 

A tire inspection form records measurable tire data rather than a general impression of condition. Tread depth is noted at several points across each tire so uneven wear shows up, and sidewall readings capture the size and marking information molded into the tire. Visible issues such as cuts, bulges, embedded objects and irregular wear are described in words next to the measurement. The tire position on the vehicle is labeled so each reading can be traced back to a specific wheel. 

## Matching readings to the sidewall 

Sidewall readings link the physical tire to the size printed on it, which keeps the record consistent between checks. A tire size such as 205/55R16 tells you the width, the aspect ratio and the wheel diameter, and writing that string on the form identifies the tire beyond doubt. Load and speed markings on the sidewall belong in the record too, because a replacement tire must match them. A form that lists the sidewall size lets a later check confirm the same specification is still fitted. 

## Pre-trip and post-trip comparison 

Pre-trip and post-trip checks work as a pair, and the form is only useful when both halves are filled in. The pre-trip entry sets the baseline tread depth and condition before the renter takes the vehicle, and the post-trip entry repeats the same measurements afterward. Comparing the two entries shows whether tread loss or new damage happened during that rental period. Both entries should be signed and dated so the record stands on its own. 

## Questions about tire inspection forms 

### What is a Turo tire inspection form used for? 

A Turo tire inspection form is used to document the condition of every tire at the start and end of a rental. It records tread depth, sidewall readings and visible damage so that any change can be tied to a specific trip. The completed form supports damage documentation if a dispute arises over tire wear or harm. 

### How do I measure tread depth for the form? 

Tread depth is measured with a tread depth gauge placed in the main grooves of each tire. Take a reading at several points around the tire and across the width, then write each value on the form for that wheel position. Recording multiple values shows uneven wear that a single reading would hide. 

### Should sidewall readings go on the inspection form? 

Sidewall readings should go on the inspection form because they identify the exact tire fitted to the vehicle. Write down the size string, the load index and the speed rating as molded on the sidewall. These markings let a later check confirm that a replacement tire matches the original specification. 

### What tire damage should I document on the form? 

Any cut, bulge, crack, embedded object or exposed cord on a tire should be documented on the form. Describe where the damage sits on the tire and note it next to the tread and sidewall readings for that wheel. Damage that affects the sidewall or shows cords needs assessment by a trained tire specialist before the vehicle goes back out.
