Tread Depth Gauge for Tires: What It Is and What It Measures

A tread depth gauge measures the depth of the grooves in a tire. Learn how the tool works, how to read it in 32nds or millimeters, and how it fits tire inspection.

3 min read1 views
— · 0 votes
Contents
  1. What the gauge measures
  2. Pin-type and digital gauges
  3. Reading tread depth in 32nds and millimeters
  4. Tread depth gauge questions
  5. What can you use to test tread wear on your tires?
  6. What is a tire tread depth gauge used to measure?
  7. Is a digital tire tread gauge better than a pin-type gauge?
  8. How does a tread depth checker work on a tread groove?

A tread depth gauge for tires is a small measuring tool that reads how deep the tread grooves sit below the surface of the rubber. It tells you the remaining tread depth of a tire, not the tire size or the sidewall markings. The page explains what the tool measures, how the pin-type and digital versions work, and how a reading is taken.

What the gauge measures

A tread depth gauge measures the distance from the top of the tread block down to the bottom of the tread groove. That distance is the tread depth, and it shows how much rubber remains above the wear indicator bars. The gauge reports the groove depth only and says nothing about tire pressure, sidewall damage or tread pattern quality. Sidewall inspection is a separate check that looks at cracks, cuts and bulges on the tire side.

Pin-type and digital gauges

A pin-type tread depth gauge has a small probe that slides out of a sleeve and a scale that locks the reading in place. You press the probe into the groove until the base sits flat on the tread, and the scale shows the depth in 32nds of an inch or in millimeters. A digital tire tread gauge does the same job with an electronic display, which removes the need to read a fine scale. Both types are tire tread measurement tools that fit in a pocket.

Reading tread depth in 32nds and millimeters

Tread depth readings in 32nds of an inch are the scale that tire makers use on tread wear charts in some regions. The same gauge may show millimeters on a second scale, and the two scales describe the same groove. A tread wear indicator is a raised bar inside the groove that marks the point where the tire is worn. A gauge reading above that bar is a clearer number than a visual check alone.

Tread depth gauge questions

What can you use to test tread wear on your tires?

A tread depth gauge is the tool made for testing tread wear, because it puts a number on the groove depth. A coin test can give a rough idea, but the coin method depends on the coin and the eye of the person holding it. For a repeatable reading, a pin-type or digital gauge is the better tire inspection tool.

What is a tire tread depth gauge used to measure?

A tire tread depth gauge is used to measure the depth of the tread grooves, from the tread surface down to the groove bottom. It does not measure tire width, diameter or sidewall height, which belong to the tire size markings. The reading tells you how much tread rubber is left.

Is a digital tire tread gauge better than a pin-type gauge?

A digital tread depth gauge shows the reading on a screen, which suits anyone who finds a small scale hard to read. A pin-type gauge needs no battery and locks the probe at the depth it reached. Both measure tread depth the same way, and the choice depends on how you like to read a number.

How does a tread depth checker work on a tread groove?

A tread depth checker places its probe into a tread groove and rests the flat base on the tread surface next to it. The probe stops at the groove bottom, and the gauge converts that travel into a depth reading. Pressing the base flat against the tread keeps the reading true.

Read next

Latest articles