Trailer Tire Speed Rating: Chart and Meaning

Read the speed symbol on a trailer tire sidewall, use the speed rating chart for trailer tires, and see how load range and ST or LT construction change the limit.

8 min read1 views
— · 0 votes
Contents
  1. What the speed symbol tells you
  2. Speed rating chart for trailer tires
  3. ST and LT tires carry different limits
  4. Load range sets the real ceiling
  5. How to read the full sidewall
  6. Towing within the speed limit
  7. Matching a replacement tire
  8. Trailer Tire Speed Rating Questions
  9. What is the maximum speed for trailer tires?
  10. Where is the speed symbol on a trailer tire sidewall?
  11. Do ST tires have a lower speed rating than LT tires?
  12. Can I tow faster than the speed rating on the tire?
  13. Does load range change the speed rating of a trailer tire?
  14. What does a speed rating chart for trailer tires show?

A trailer tire speed rating is the maximum speed a tire is designed to carry, shown as a letter speed symbol on the sidewall. The chart below turns that symbol into a speed, so you can match tire capability to how fast your trailer is actually towed. Load range and tire construction decide how much of that rating you can use.

  • The speed symbol on a trailer tire sidewall is a single letter that stands for a maximum speed.
  • A trailer tire speed rating chart lists each symbol against the speed it allows.
  • A rating is set for a tire carrying its rated load, so a heavily loaded trailer has less margin.
  • ST tires and LT tires carry different speed symbols, so check the sidewall rather than assuming.
  • Towing at or near the maximum speed rating leaves no reserve for heat or a slow leak.

What the speed symbol tells you

A speed symbol on a trailer tire is a letter near the size code that states the maximum speed the tire is designed for. The symbol is part of the tire service description, which pairs it with a load index number. Together they describe how much weight the tire carries and how fast it can roll.

The speed symbol answers one question only: how fast the tire may be driven while carrying its rated load. It says nothing about tread life, traction or the condition of the tire on your trailer. A tire with a high symbol can still be unsafe if it is underinflated or worn.

Read the symbol from the sidewall itself, because the letter is the legal and technical statement of the tire's limit. A trailer tire speed rating chart is only a translation of that letter into a speed. If the sidewall is dirty or the letter is small, wipe it clean and read the full service description.

Speed rating chart for trailer tires

The chart below lists the speed symbols you meet on trailer tires and the maximum speed each one allows. A higher letter does not mean a better tire, it means a tire built for a higher maximum speed. Use the chart with the load index and the inflation pressure to judge whether a tire suits your towing.

Load range and speed symbol work as a pair. A tire at the top of its load range is already working hard, and the heat it builds rises with speed. The chart gives a ceiling, not a target, so a trailer tire towing at its rated load should stay below that ceiling.

Tire makers can set a lower speed limit for a specific tire than the letter suggests, especially for trailer service. The sidewall and the tire maker's published data are the final word for that tire. Where the two disagree, follow the lower figure.

Speed symbolMaximum speedTypical trailer use
J62 mphLow-speed utility and stock trailers
K68 mphGeneral highway trailer service
L75 mphHigher-speed highway towing
M81 mphFast highway towing with a light load
N87 mphSpecialty trailers with a high-speed build

ST and LT tires carry different limits

ST and LT trailer tires are built for different jobs, and their speed symbols reflect that. ST stands for special trailer, a tire designed for trailer axle loads and the scrub of tandem axles. LT stands for light truck, a tire designed first for a driven vehicle.

Many ST tires carry a speed symbol of L or lower, while LT tires often reach a higher letter. Fitting an LT tire to a trailer changes the load and speed picture, because the tire was not designed around trailer service. Compare the load index of the two tires before you swap one for the other.

Never mix the two constructions on one axle, because they flex and carry load differently. A mismatched pair puts unequal load on the tires and can affect trailer stability. Keep ST with ST and LT with LT across an axle.

Load range sets the real ceiling

Trailer tire load range is a letter that shows how much load a tire can carry at a stated inflation pressure. Load range is not the same as load index, though the two are linked on a given tire. A higher load range tire carries more weight at its rated pressure.

The speed rating assumes the tire is inflated to the pressure that matches its load. A tire run below that pressure flexes more, heats faster and loses speed capability. Check the pressure cold, before a trip, and add air to the figure on the sidewall or the trailer placard.

Overloading a trailer tire above its rated load takes away the speed margin the rating promises. Weigh the loaded trailer at an axle scale to know the real load on each tire. When the load is close to the tire limit, keep the towing speed well under the maximum speed rating.

How to read the full sidewall

Trailer tire markings sit in a block near the bead and repeat the size, load index, speed symbol and load range. A size such as ST225/75R15 carries the ST service type, the section width, the aspect ratio and the wheel diameter. The service description after the size holds the load index number and the speed letter.

The sidewall also states the maximum load and the inflation pressure for that load, plus a maximum speed where the maker adds one. DOT markings identify the plant and the week of manufacture. None of these markings replace the rating chart, but they give the exact input for it.

Take a photo of the sidewall and keep it with your trailer papers, so a replacement tire can be matched without guesswork. Matching the speed symbol and load index keeps the trailer at the capability it had. A tire shop can confirm the reading if a marking is hard to see.

Towing within the speed limit

The trailer tire speed limit is the lower of the tire's rating and any limit set for the trailer or the towing setup. Towing at the maximum speed rating for a long stretch leaves no reserve for heat, a soft tire or a rise in load. Plan a cruising speed below the rating on long highway runs.

Heat is the reason a speed rating matters on a trailer, because trailer tires carry load without drive torque to warm them evenly. A tire at its limit on a hot day builds more heat than the same tire on a cool morning. Check tire pressure and temperature at stops to catch a problem early.

An overloaded or underinflated trailer tire can fail at a speed below its rating. Have a trained specialist inspect tires that show cracks, bulges or uneven wear before the next trip. Trailer axle and brake service belongs with a qualified shop, not a roadside fix.

Matching a replacement tire

A replacement trailer tire should meet or exceed the speed symbol and load index of the tire it replaces. Dropping to a lower load range or speed letter reduces what the trailer can safely do. Check the new sidewall against the old one before the tire is mounted.

Replacing one tire on a tandem axle with a different size or rating puts uneven load on the pair. Fit tires of the same size, load range and speed symbol across an axle. If the old size is no longer made, change the pair rather than mixing capabilities.

A tire shop should mount and balance trailer tires and check the wheel for cracks and corrosion. Have the shop confirm the wheel's own load and speed limits, because the wheel can be the weaker part of the assembly. Record the new service description so the next purchase is simple.

Trailer Tire Speed Rating Questions

What is the maximum speed for trailer tires?

The maximum speed for trailer tires depends on the speed symbol on each tire, not on one figure for all trailers. A J symbol allows 62 mph and an L symbol allows 75 mph, so read the sidewall before you plan a towing speed. Keep a margin below the rating when the trailer is loaded near its tire limit.

Where is the speed symbol on a trailer tire sidewall?

The speed symbol on a trailer tire sidewall is a single letter at the end of the service description, right after the load index number. It sits in the same block as the size and the load range letter. Wipe the area clean and read the full line, because a small letter is easy to miss.

Do ST tires have a lower speed rating than LT tires?

ST tires often carry a lower speed symbol than LT tires of a similar size. Special trailer tires are built around trailer axle loads, and their ratings reflect that service. Compare the load index and speed letter on both tires before you change construction type.

Can I tow faster than the speed rating on the tire?

No, towing faster than the speed rating on the tire is outside what the tire is designed to do. The rating assumes the tire carries its rated load at the correct pressure. Exceeding it builds heat faster and raises the risk of a trailer tire failure.

Does load range change the speed rating of a trailer tire?

Load range does not change the speed symbol, but it sets the load the tire can carry at that speed. A higher load range tire carries more weight at its rated inflation pressure. Keep the tire at its stated pressure so the speed rating holds.

What does a speed rating chart for trailer tires show?

A speed rating chart for trailer tires shows each speed symbol against the maximum speed it allows. The chart translates the letter on the sidewall into a number you can compare with your towing speed. Use it with the load index, not on its own, to judge a tire.

Read next

Latest articles