TPMS Warning Light

Learn what the TPMS warning light on your dashboard means, why the tire icon flashes then stays steady, and how to check tire pressure before you reset it.

3 min read1 views
— · 0 votes
Contents
  1. Reading a steady tire icon
  2. When the light flashes then stays on
  3. Direct and indirect monitoring systems
  4. Questions About the TPMS Light
  5. What does the tire pressure monitoring system warning light mean?
  6. Why is my TPMS light flashing then steady?
  7. Can I drive with the low tire pressure light on?
  8. Does the TPMS light reset by itself after I add air?

The TPMS warning light is the dashboard tire icon that tells you the tire pressure monitoring system has detected a pressure problem in one or more tires. A steady glow points to low pressure, while a flash followed by a steady light points to a system fault. The page explains what the tire pressure monitoring system light reports, how to read a flashing icon, and what to check before you reset it.

Reading a steady tire icon

A steady low tire pressure light means the system sees pressure below the level the vehicle maker set. One or more tires may have lost air through a slow leak, a valve, or a temperature drop. A gauge check on each tire shows which one is low and how far it has drifted from the door placard value. Correct the pressure cold, then drive so the sensors can report again.

When the light flashes then stays on

A light that flashes then steady shows the monitoring system cannot read a sensor. The cause can be a dead sensor battery, a damaged sensor, or a signal problem after a wheel swap or rotation. This pattern is not a pressure reading, so the tire may still be at the right inflation. A tire shop with a scan tool can identify the sensor that stopped reporting.

Direct and indirect monitoring systems

A direct TPMS uses a pressure sensor inside each wheel and sends readings to the dashboard. An indirect system compares wheel speed and infers a low tire from a rolling difference. A direct system names the affected tire, while an indirect system often lights a single icon without saying which wheel. Knowing which type your vehicle uses tells you how much detail the light can give.

Questions About the TPMS Light

What does the tire pressure monitoring system warning light mean?

The tire pressure monitoring system warning light means the vehicle has detected a pressure issue or a sensor fault. A steady icon points to low pressure in at least one tire. A flash followed by a steady icon points to a sensor or signal problem instead. The light does not replace a gauge check.

Why is my TPMS light flashing then steady?

A TPMS light that flashes then stays steady signals a system fault rather than a simple low tire. The monitor cannot get a reading from a sensor, often after a battery dies or a wheel is replaced. The tire pressure itself may be correct. A scan tool identifies the sensor that stopped reporting.

Can I drive with the low tire pressure light on?

You can drive to a safe place to check pressure, but treat the low tire pressure light as a prompt to stop and inspect. A soft tire can overheat and lose grip, and a slow leak can worsen. Check each tire with a gauge and add air to the placard value. Have a trained technician inspect a tire that keeps losing pressure.

Does the TPMS light reset by itself after I add air?

The TPMS light resets by itself on many vehicles once pressure returns to the correct level and you drive. Some vehicles need a reset through a dash menu or a relearn procedure with a tool. Check the owner manual for your model. A light that stays on after correct pressure points to a sensor issue.

Read next

Latest articles