Towing Tire Size Guide

Learn how to read tire dimensions for towing, match load rating to your tow vehicle, and judge how a change in overall diameter affects gearing and speedometer error.

3 min read1 views
— · 0 votes
Contents
  1. Reading the sidewall numbers
  2. Load rating for towing
  3. Diameter change and the drivetrain
  4. Towing Tire Size Questions
  5. What tire size should I run on a tow vehicle?
  6. Do bigger tires help when towing?
  7. How do I compare tire dimensions for towing?
  8. Does a tire size change affect the speedometer?

This towing tire size guide explains how to pick tire dimensions for towing by reading the sidewall numbers, matching load rating to the load, and checking how a change in overall diameter affects the vehicle. Tire size for a tow vehicle is a balance of load capacity, section width, and the diameter the vehicle was built around. The goal is a tire that carries the weight, fits the wheel and body, and keeps the drivetrain working as designed.

Reading the sidewall numbers

Sidewall numbers give section width, aspect ratio, and wheel diameter, and those three values set the tire dimensions for towing. Section width is the tire's widest point in millimeters, while the aspect ratio is the sidewall height as a share of that width. A size such as 275/65R18 means a 275 mm section width on a 65 percent aspect ratio, fitted to an 18 inch wheel. The load index and speed symbol after the size complete the picture, so read them before comparing anything.

Load rating for towing

Load rating for towing must meet or exceed the load the tire carries on the vehicle, including tongue weight and cargo. Load capacity by tire size changes with inflation pressure, so the same size can carry different loads at different pressures. A higher load range tire carries more at the pressure it is rated for, but the wheel must also be rated for that pressure. Check the vehicle placard and the trailer requirements, and let a trained specialist confirm the final figure.

Diameter change and the drivetrain

Overall diameter change alters effective gearing, so a larger tire makes the engine work harder to turn the wheels. Tire diameter also shifts the speedometer and odometer, because both are calibrated to the original size. A diameter change of any size adds speedometer error, and the error grows as the difference grows. On a tow vehicle, staying near the original overall diameter keeps towing behavior close to what the manufacturer designed.

Towing Tire Size Questions

What tire size should I run on a tow vehicle?

Tow vehicle tire sizing starts with the size the manufacturer specifies, then moves only for a clear reason such as more load capacity or a different wheel. Any new size must keep the load rating at or above the axle load and stay clear of the body and suspension. A trained tire specialist should confirm the fit before you commit to it.

Do bigger tires help when towing?

Bigger tires do not help towing by themselves, because a larger diameter raises the effective gearing and can make the engine work harder under load. Extra sidewall height can soften the ride and absorb rough ground, which suits some off-road towing. The trade is slower acceleration, a changed speedometer, and more strain on the drivetrain.

How do I compare tire dimensions for towing?

Tire dimensions for towing are compared by section width, aspect ratio, wheel diameter, and load index, using a tire size chart or a calculator. Overall diameter and circumference follow from those numbers, so compare the new size against the original to see the difference. Confirm that the wheel width suits the section width before buying.

Does a tire size change affect the speedometer?

A tire size change does affect the speedometer whenever the overall diameter differs from the original. The gauge is calibrated to a set number of wheel revolutions per distance, so a different diameter changes the reading. Speedometer error also shifts the odometer, and a recalibration may be needed after the change.

Latest articles