Total Load Capacity of a Set of Tires

Learn how the total load capacity of a set of tires is calculated from each tire load index and why it must meet or exceed your vehicle maximum load.

3 min read1 views
— · 0 votes
Contents
  1. How the total is built
  2. Comparing totals to vehicle needs
  3. Why mismatched tires distort the total
  4. Questions on tire load capacity totals
  5. How is the total load capacity of a set of tires calculated?
  6. Does the total have to match the maximum vehicle load?
  7. What happens if one tire has a lower load index?
  8. Do I use the tire load index totals for each axle?

The total load capacity of a set of tires is the added load rating of all the tires fitted to the vehicle. Each tire carries a load index that translates to a per-tire load capacity, and the sum of four tire load capacities gives the figure for a standard four-wheel car. That total must equal or exceed the maximum vehicle load placed on the tires by the vehicle itself.

How the total is built

Tire load rating totals come from adding the capacity of each tire, not from the size of one tire. A tire load index is a code on the sidewall that maps to a load capacity in pounds or kilograms. Read the index for every tire, convert each to its capacity, and add them. The sum of four tire load capacities is the total for a car with four wheels.

Comparing totals to vehicle needs

A vehicle axle load rating describes the weight a single axle is designed to carry. The maximum vehicle load on the tires is the weight the manufacturer allows, split across the axles. The tire set total must meet or exceed that maximum vehicle load to support the vehicle safely. Check each axle against the tires on that axle as well, not only the full total.

Why mismatched tires distort the total

Tire load rating totals assume every tire in the set shares the same rating, so one lower-rated tire reduces the set total. Fitting tires with different load indexes changes the sum of four tire load capacities in a way that can hide a weak corner. Keep the per-tire load index matched across an axle at minimum. When in doubt, have a trained tire specialist confirm the figures against the vehicle plate.

Questions on tire load capacity totals

How is the total load capacity of a set of tires calculated?

Total load capacity of tires is calculated by finding the load capacity for each tire and adding them together. You read the per-tire load index on the sidewall and convert it to its capacity value. Then you add the capacities of all four tires to get the set total. The result must meet or exceed the maximum vehicle load on those tires.

Does the total have to match the maximum vehicle load?

Yes, the total load capacity of a set of tires must equal or exceed the maximum vehicle load the vehicle allows. The vehicle axle load rating sets how much weight each axle should carry, and the tires on that axle must support it. A set total below the maximum vehicle load leaves the vehicle under-supported. A trained specialist can confirm the correct rating for your vehicle.

What happens if one tire has a lower load index?

A tire with a lower per-tire load index reduces the total load capacity of the set, because the sum follows the weaker tire. The other tires cannot make up the difference on their own axle. Keep the load index matched across each axle to keep the total accurate. Replacing a single tire with a different rating alters the tire load rating totals.

Do I use the tire load index totals for each axle?

Yes, axle checks matter as much as the full set total, because the vehicle axle load rating applies to each axle separately. Add the capacities of the tires on one axle and compare that to the load that axle carries. The sum of four tire load capacities covers the vehicle as a whole. Both views together confirm the set supports the vehicle maximum load.

Latest articles