# Tire Width Chart

Read a tire width chart to compare section width in millimeters and inches, see how rim width range affects fitment, and tell section width from tread width.

A tire width chart lists the section width of each tire size, given in millimeters and often converted to inches, so you can compare sizes at a glance. The section width is the first number in a size designation such as 225/45R17, measured across the widest part of the inflated tire. A chart helps you compare that number across sizes and check it against the [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) of your wheel. 

- The first number in a size like 225/45R17 is the section width in millimeters.
- Dividing the millimeter figure by 25.4 gives the tire width in inches.
- Section width includes the sidewall bulge and is wider than the tread width.
- Each tire size is designed for a rim width range, and the measured rim affects the real width.
- The width of the tire must fit the wheel and clear the vehicle body, so check both before buying.
 

## What a tire width chart shows 

A tire width chart is a table of tire sizes arranged so the width of each one can be compared side by side. Each row shows a section width in millimeters, and many charts add the same figure in inches for readers who work in imperial units. The chart is a reference for reading tire size designations, not a fitment guide for a specific vehicle. 

The header of a tire width chart names the dimension in each column, so you can see whether a figure is a section width or a tread width. A metric tire width is written as a whole number of millimeters, such as 195, 205 or 225. The inches column is a conversion of that metric figure, not a separate measurement. 

Use the chart to move between the two unit systems and to see how much wider one size is than another. The chart does not tell you whether a size fits your wheel or your car, because those answers depend on the rim and the vehicle. Treat the chart as a starting point for a fitment check with a tire technician. 

## Section width against tread width 

Section width is the distance across the tire from the outer edge of one sidewall to the outer edge of the other, measured on the widest point. Tread width is the distance across the part of the tire that touches the road, which is narrower than the section width. A tire width chart normally reports the section width, because that is the number printed in the size designation. 

The sidewall bulge adds to the section width without adding rubber to the contact patch. Two tires with the same tread width can have different section widths if their sidewall profiles differ. A sidewall width diagram makes this clear by showing the section line crossing the widest part of the sidewall, below the tread edge. 

Tire section width matters for clearance, because the sidewall is what comes closest to suspension parts and the fender. Tread width matters for how much rubber meets the road. When you compare a [tire width comparison](/articles/tire-size-calculator-diameter-comparison-material-44527/) chart, check which of the two measurements each column reports before you draw a conclusion. 

## Reading the numbers in millimeters and inches 

Metric tire widths are stated in millimeters, and the inch figure is found by dividing the millimeter value by 25.4. A 225 mm section width converts to about 8.86 inches, and a 195 mm section width converts to about 7.68 inches. A tire width conversion chart saves you the arithmetic when you compare several sizes. 

The size designation carries the width as its first number, so the 205 in 205/55R16 is a section width of 205 mm. The second number is the aspect ratio, which is the sidewall height as a percentage of the width. Aspect ratio changes the sidewall height but not the nominal section width. 

Rounded inch figures in a tire width table are close enough for comparison but not for a fitment decision. The actual width of a mounted tire can differ from the nominal figure on the sidewall. Confirm the measured width of the exact tire model before you commit to a wheel or a vehicle. 

## How rim width affects the measured width 

Each tire size is designed to be measured on a specified rim width, often called the measuring rim. Mounting the same tire on a wider rim stretches the sidewalls and increases the measured section width. Mounting it on a narrower rim pulls the sidewalls in and reduces the measured width. 

Tire makers publish a rim width range for each size, and the tire should only be mounted within that range. A rim narrower than the range pinches the sidewall and can damage the tire. A rim wider than the range over-stretches the sidewall and changes its shape. 

The rim width range appears in the tire maker's specification sheet rather than in a simple tire size width chart. Use the chart to compare nominal widths, then check the spec sheet for the rim range of the size you want. A trained tire technician can confirm whether a wheel and tire pair is safe to mount. 
| Tire size example | Section width | Width in inches (approx.) | 
| 185/65R15 | 185 mm | 7.28 in | 
| 195/65R15 | 195 mm | 7.68 in | 
| 205/55R16 | 205 mm | 8.07 in | 
| 215/55R17 | 215 mm | 8.46 in | 
| 225/45R17 | 225 mm | 8.86 in | 
| 245/40R18 | 245 mm | 9.65 in |  

## Comparing widths across a size chart 

A tire size width comparison works by holding other dimensions steady where you can and reading the width column alone. Going from 205 to 225 adds 20 mm of nominal section width, which is about 0.79 inches. That extra width affects clearance and the rim width the tire needs. 

Changing the width often means changing the aspect ratio to keep the overall diameter close to the original. A wider tire with a lower aspect ratio can keep a similar rolling diameter while adding width. The chart shows the width change, and the size designation shows the aspect ratio that goes with it. 

Compare more than the width when you move between sizes, because a wider tire needs a wider rim to sit correctly. Clearance to suspension, brakes and the fender is tight on many vehicles. Have a technician check the proposed size against the vehicle before you buy. 

## Where the width sits in the designation 

The tire size designation puts the section width first, before the slash, and that placement is the same across metric sizes. In 225/45R17, the 225 is the section width in millimeters, the 45 is the aspect ratio and the 17 is the rim diameter in inches. The chart and the sidewall use the same order. 

Some tires use a different marking system, such as flotation sizes for light trucks written in inches throughout. Those sizes state the width in inches as part of the overall measurement, so a tire width chart for metric sizes does not apply directly. Read the full marking before you compare it with a metric row. 

The width figure in the designation is nominal, which means it describes the size class rather than a precise measurement of every tire. Two tires in the same size from different makers can measure slightly differently. The nominal figure is still the basis for comparing sizes on a chart. 

## Checking width against the wheel and the car 

A tire width chart answers size questions, but fitment needs the actual dimensions of the wheel and the space around it. The rim width must fall inside the tire maker's range, and the mounted width must clear the vehicle. Measuring the existing clearance and the existing tire gives a useful baseline for a comparison. 

Width changes also affect speedometer accuracy when the overall diameter changes with the new size. A wider tire with a taller overall diameter turns fewer times per distance, and the speedometer reads low. Keep the overall diameter close to the original to limit that effect. 

Mounting a tire outside the rim width range or fitting a size that rubs is a safety risk, and a trained specialist should confirm the fit. Ask a tire technician to check the wheel width, the offset and the clearance before the tires are installed. A chart cannot see those details on your car. 

## Tire Width Chart Questions 

### What is tire section width? 

Tire section width is the measurement across the tire from the outer edge of one sidewall to the outer edge of the other. It is taken at the widest part of the inflated tire on its measuring rim. The section width is the first number in a size designation and is written in millimeters for metric tires. 

### How do I convert tire width from millimeters to inches? 

Divide the millimeter figure by 25.4 to get the tire width in inches. A 205 mm section width is about 8.07 inches, and a 245 mm section width is about 9.65 inches. A tire width conversion chart gives the same result without the arithmetic. 

### Is section width the same as tread width? 

No, section width and tread width are different measurements of the same tire. Section width spans the widest part of the sidewalls, while tread width spans the part that contacts the road. Section width is always the larger of the two, and the tire width chart normally lists section width. 

### Does a wider tire need a wider rim? 

Yes, a wider tire needs a rim that falls inside the tire maker's rim width range for that size. Mounting a wide tire on a narrow rim pinches the sidewall, and mounting it on an overly wide rim over-stretches it. The rim width range is published in the tire maker's specification sheet. 

### Why does the measured width differ from the sidewall number? 

The sidewall number is a nominal section width for the size class, not a precise measurement of every tire. The rim width the tire is mounted on changes the measured width, because a wider rim stretches the sidewalls. Makers list the measuring rim so the reference width can be reproduced. 

### Can I use a tire width chart to pick a tire for my car? 

A chart helps you compare sizes, but it does not confirm fitment for your vehicle. The wheel width, offset and clearance around the tire all affect whether a size works. Have a tire technician verify the size against your car before you buy.
