Tire Size Guide for Enthusiasts
Read a tire size designation part by part, from section width and aspect ratio to load index and speed rating, then compare fitment using overall diameter.
Contents
- Reading the size designation
- Working out overall diameter
- Load index and speed rating
- Tire Size Questions for Enthusiasts
- How do you read tire sidewall markings?
- Does a higher aspect ratio always mean a taller tire?
- Can I fit a tire with a lower load index?
- Does overall diameter change when I move to a larger rim?
This tire size guide for enthusiasts breaks a sidewall size designation into its parts and shows how each number shapes the tire's dimensions. It covers section width, aspect ratio, rim diameter, load index and speed rating, then explains how to work out overall diameter for a fitment comparison. The aim is to let you read any sidewall marking at once and judge whether a size suits your wheel and your car.
Reading the size designation
A tire size designation such as 225/45R17 reads left to right and each part carries one meaning. The first figure is section width in millimeters, measured across the widest part of the inflated tire. The figure after the slash is the aspect ratio, the sidewall height as a percentage of section width. The letter R marks radial construction, and the last number is the rim diameter in inches that the tire mounts on.
Working out overall diameter
Overall diameter tells you how tall the tire stands once mounted on its wheel. Find it by converting section width to inches, multiplying by the aspect ratio, and adding the rim diameter twice with the sidewall height. Enthusiasts use overall diameter to keep the speedometer reading close and to check clearance in the wheel well. A change in rim diameter alone does not change overall diameter when the aspect ratio moves to compensate.
Load index and speed rating
Two extra markings sit after the size and describe what the tire can carry and how fast it may turn. The load index is a code for the maximum load a single tire supports at a stated pressure. The speed rating is a letter for the top speed the tire is built to endure under load. Both must meet or exceed the figures your vehicle maker specifies, since fitting a lower code reduces the margin.
Tire Size Questions for Enthusiasts
How do you read tire sidewall markings?
Tire sidewall markings read as a size, then a load index and a speed rating, such as 225/45R17 91V. The size gives section width, aspect ratio and rim diameter in that order. The load index code and the speed rating letter follow after a space. A fitment comparison starts by matching that size to the wheel and the vehicle.
Does a higher aspect ratio always mean a taller tire?
A higher aspect ratio does not always mean a taller tire, because the sidewall figure depends on section width as well. Aspect ratio is a percentage of section width, so a wider tire with a lower ratio can still have a tall sidewall. Compare overall diameter to judge true height. Two tires with the same rim diameter can differ in total height.
Can I fit a tire with a lower load index?
No, you should not fit a tire with a lower load index than your vehicle maker specifies. The load index is a code for the maximum load one tire supports at a stated pressure. A lower code cuts the load margin the car was built around. Match or exceed the specified load index and speed rating when changing size.
Does overall diameter change when I move to a larger rim?
Overall diameter stays the same when you move to a larger rim if the aspect ratio drops to match. Each inch added to rim diameter needs a shorter sidewall on each side to hold total height. Work the figures through before buying, since another diameter changes speedometer reading and clearance. Fitment comparison compares overall diameter, not rim size alone.