# Tire Size for Wheelchair Accessible Vehicles

Read the sidewall code of a wheelchair accessible vehicle, confirm load index and diameter, and check tire fitment against ramp and lift clearance.

The tire size for a wheelchair accessible vehicle is the size printed on the driver's door jamb label or in the owner's manual, matched to the wheel the van was built with. That original equipment size gives you the width, aspect ratio, wheel diameter, [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) the vehicle needs. Changing any of those numbers alters tire diameter, which can affect ramp clearance, lift clearance and speedometer readings. 

- Use the door jamb label or owner's manual as the source for the original equipment tire size.
- A sidewall code such as 225/75R16 121R gives width, aspect ratio, wheel diameter, load index and speed rating.
- Lowered floor and ramp vans carry extra weight, so the load index matters as much as the dimensions.
- A different overall diameter changes ride height and can affect ramp and lift clearance.
- Any size change should keep the load capacity at or above the original figure for the axle.
 

## Where the original tire size is printed 

The original equipment tire size for a wheelchair accessible van is listed on a certification label on the driver's door jamb. That label states the tire dimensions and the inflation pressure the manufacturer specifies for the front and rear axles. The owner's manual repeats the same information and adds any notes for the specific conversion. 

Reading the label first keeps the search grounded in the vehicle you actually drive. A conversion company may change wheels, add suspension spacers or fit a different rear axle, so the label on the completed van is the reference point. Photograph the label before you shop so the numbers travel with you. 

The sidewall of each tire on the van shows the same size code, and that code confirms what is fitted now. If the sidewall disagrees with the door label, the van may carry a tire that was installed later by a previous owner. A trained tire technician can check whether that substitution is safe. 

## Reading the sidewall size code 

A sidewall tire size marking such as 225/75R16 121R packs five pieces of information into one string. The first number is the tire width in millimeters, and the second is the aspect ratio, which is the sidewall height as a percentage of that width. The letter R stands for radial construction. 

The number after the letter is the wheel diameter in inches, so a 16 there means the tire fits a 16 inch wheel. The load index follows the diameter, and the letter at the end is the speed rating. Tire dimensions on the sidewall also include the overall diameter, which you can calculate from width, aspect ratio and wheel size. 

A metric size can also appear in the light truck format, such as 235/85R16, or in the older flotation format used on some vans. The load index and speed rating are separate from the dimensions and are printed after the size. Both matter for a heavy accessible van, and both must meet or exceed the original specification. 

## Load index for accessible vans 

Load index for accessible vans deserves as much attention as tire width and diameter. A lowered floor vehicle carries a reinforced floor, a ramp or lift, a wheelchair and a passenger, so the rear axle often sees more weight than a standard van. The load rating of each tire must cover that axle weight when divided across the tires on it. 

The load index is a code number that maps to a maximum load per tire, and the door label states the figure the van was built around. Fitting a tire with a lower load index than the original reduces the margin the vehicle was designed with. A tire with a higher load index can be acceptable if the size and speed rating still match the specification. 

Load index and speed rating travel together in the sidewall code, and a tire that meets one but not the other is not a match. Tire shops can look up the load capacity for a given index and compare it with the axle rating on the label. A trained specialist should confirm the match before any tire goes on a converted van. 

## Why tire diameter affects ramp clearance 

Tire height for ramps is a practical concern on a lowered floor vehicle. The overall diameter of the tire sets the ride height at each corner, and the ramp or lift was installed to work with that height. A taller tire raises the van and can change the angle at which the ramp meets the ground. 

Ramp clearance and lift clearance are measured with the vehicle at its specified ride height. If a replacement tire is taller than the original, the deployable ramp may sit at a different angle and the lift may not stow as designed. A shorter tire lowers the body and can reduce the gap between the ground and the ramp mechanism. 

Tire diameter and width comparison between the original size and a candidate size shows the change before you buy. Width also matters because a wider tire can rub on the inner fender or on suspension parts at full steering lock. Measure both dimensions and compare them with the original before fitting anything. 

## Wheel fitment beyond the tire size 

Wheel fitment covers the bolt pattern, center bore, offset and width of the wheel itself. A tire can match the sidewall code and still sit wrong on a wheel with the wrong offset. Offset moves the tire in or out relative to the suspension, and it can change clearance to the fender and the ramp hardware. 

Accessible van tire specifications often list a wheel width range for each tire size. A tire fitted to a wheel narrower or wider than that range wears unevenly and may not seat correctly. The bolt pattern and center bore must match the hub exactly, because a wheel that does not center on the hub cannot be balanced reliably. 

Adaptive vehicle tire dimensions include the wheel as well as the rubber, so ask for the full specification when you compare options. Aftermarket wheels on a converted van also need to clear the brake calipers and any suspension modifications. A trained technician should test fit the wheel and check clearances before the vehicle returns to service. 

## Matching a replacement size safely 

A safe replacement keeps the load index, speed rating and overall diameter close to the original specification. Tire size calculators help, but the door label and the conversion company's documentation remain the authority. Any deviation from the original should be checked against the axle rating and the ramp geometry. 

Staying with the original size removes most of the risk and keeps the speedometer and odometer accurate. When the original size is no longer made, a close metric equivalent with the same load index can work if a specialist verifies the fitment. The equivalent size must clear the fenders, the suspension and the ramp or lift mechanism. 

Record the original size, the new size and the load index on the service paperwork for future reference. Keep the door label intact and legible, because the next owner and the next technician will rely on it. A tire professional should perform the final check on a converted vehicle. 

## Inspecting tires on a converted van 

Regular inspection catches wear and damage before they affect the ramp or lift system. Check tread depth across the width of each tire, because uneven wear points to an alignment or inflation problem. Look for cuts, bulges and embedded objects in the tread and sidewall. 

Check the inflation pressure against the door label when the tires are cold. Underinflation raises sidewall flex and heat, and it reduces the load the tire can carry. Overinflation wears the center of the tread and makes the ride harsher for a passenger in a wheelchair. 

Rotate the tires at the interval the owner's manual gives and have the alignment checked after any curb impact. A van with a lowered floor and a ramp has specific jacking points, so let a trained technician lift it. Jacking a converted van at the wrong point can damage the floor or the ramp mechanism. 

## Wheelchair accessible van tire questions 

### What tire size fits a wheelchair van? 

The tire size that fits a wheelchair van is the original equipment size on the driver's door jamb label or in the owner's manual. A conversion company may specify a different size for the completed vehicle, so use the label on the van rather than a generic chart. Match the load index and speed rating as well as the dimensions. 

### Can I change the tire size on an accessible van? 

Yes, a tire size change is possible if the load index, speed rating and overall diameter stay close to the original specification. A taller or shorter tire changes ride height and can affect ramp and lift clearance. Have a trained technician verify the fitment before the van goes back into service. 

### How do I read the tire dimensions on the sidewall? 

Read the sidewall code from left to right: width in millimeters, aspect ratio, construction letter, wheel diameter in inches, load index and speed rating. A code of 225/75R16 121R means a 225 mm wide tire with a 75 percent aspect ratio on a 16 inch wheel at load index 121 and speed rating R. The overall diameter follows from those numbers. 

### Does tire size affect wheelchair ramp clearance? 

Yes, tire size affects wheelchair ramp clearance because overall diameter sets the ride height of the van. A taller tire raises the body and can change the angle where the ramp meets the ground. A shorter tire lowers the body and can reduce the gap under the ramp mechanism. 

### What load rating does an accessible van need? 

An accessible van needs a load rating at least equal to the original equipment figure for each axle. A lowered floor, a ramp or lift, a wheelchair and a passenger add weight, so the rear axle carries more than a standard van. Compare the tire load index with the axle rating on the door label. 

### Do wheelchair accessible vehicles use special tires? 

Wheelchair accessible vehicles use tires that meet the load and speed specification of the converted van rather than a special tire line. The conversion adds weight, so the load index is the number to check first. Size, load index and speed rating together define the correct tire.
