Tire Size Equivalents: Finding Equivalent Tire Sizes

Learn how to read tire size equivalents, convert flotation sizes like 33x12.50R20 to metric sizes, and match overall diameter, width, and load index.

8 min read1 views
— · 0 votes
Contents
  1. What a tire size equivalent means
  2. How flotation sizes convert to inches
  3. How metric sizes give overall diameter
  4. Building an equivalent tire size chart
  5. Matching diameter within a tolerance
  6. Plus sizing and same-diameter alternatives
  7. Load index and speed rating on a substitute
  8. Checking a candidate before you buy
  9. Tire Size Equivalent Questions
  10. What tire size is equivalent to 33x12.50R20?
  11. What tire size is equivalent to 35x12.50R17?
  12. What tire size is equivalent to 35x12.50R18?
  13. What tire size is equivalent to 35x12.50R20?
  14. Can I use a comparable tire size chart for any vehicle?
  15. Is tyre size equivalents different from tire size equivalents?

A tire size equivalent is a different size marking that gives close to the same overall diameter and section width as your original tire. You find one by converting the flotation or inch size into metric numbers, then matching the diameter and width within a small tolerance. The wheel diameter, load index, and speed rating must still suit your vehicle.

  • Flotation sizes like 33x12.50R20 state diameter, width, and wheel size in inches.
  • Metric sizes state width, aspect ratio, and wheel size in millimeters.
  • An equivalent tire keeps overall diameter and section width close to the original.
  • Aspect ratio and wheel size decide how wide the replacement can be.
  • Load index and speed rating must meet what the vehicle needs.

What a tire size equivalent means

A tire size equivalent is a replacement size that matches your original tire in overall diameter and section width closely enough to fit and roll the same way. Tire makers and shops compare sizes by these two dimensions, not by a single number on the sidewall. The wheel diameter must be identical because a tire cannot sit on a rim of another size.

Equivalent sizes come from two marking systems. Flotation sizes such as 33x12.50R20 give diameter, width, and wheel diameter in inches, which suits light truck and off-road tires. Metric sizes such as 275/60R20 give width in millimeters, aspect ratio as a percentage, and wheel diameter in inches.

The two systems describe the same physical tire in different words. A 33x12.50R20 and a metric size near 325/50R20 can both come close to the same diameter and width on a 20-inch wheel. Exact equal numbers are rare, so an equivalent is always an approximation within a tolerance.

How flotation sizes convert to inches

A flotation size reads as overall diameter, section width, and wheel diameter, separated by an X and an R. The first number is the height of the tire in inches, the second is the width in inches, and the last is the wheel size. The R means radial construction.

For 33x12.50R20, the tire is about 33 inches tall and 12.5 inches wide on a 20-inch wheel. For 35x12.50R17, the tire is about 35 inches tall and 12.5 inches wide on a 17-inch wheel. The 35x12.50R18 and 35x12.50R20 sizes share the same height and width but sit on different rims.

These markings are nominal, so the measured height can differ slightly between brands and tread patterns. Treat the number as a starting point for the diameter match. Confirm the actual specification on the tire maker's data sheet before you commit to a size.

How metric sizes give overall diameter

A metric size such as 275/60R20 states section width in millimeters, aspect ratio as a percentage of that width, and wheel diameter in inches. The aspect ratio is the sidewall height as a share of the section width. Overall diameter equals the wheel diameter plus twice the sidewall height.

For 275/60R20, the sidewall is 60 percent of 275 millimeters, or 165 millimeters, which is about 6.5 inches. Adding that twice to the 20-inch wheel gives an overall diameter of about 33 inches. This is why 275/60R20 is a close metric equivalent to a 33-inch flotation tire.

Width works the same way in reverse. A 12.5-inch section width equals about 318 millimeters, so a 325/50R20 or a 315/55R20 comes near the same footprint on a 20-inch wheel. The diameter and width both need to land close, not just one of them.

Building an equivalent tire size chart

An equivalent tire size chart lists the original size next to metric and flotation sizes that come close in diameter and width. Build the chart by converting every size into inches for both overall diameter and section width. Group the results by wheel diameter so you only compare tires that fit the same rim.

The table below shows the flotation sizes in the searches and the metric sizes that sit near them. The metric figures are approximations, and the real diameter shifts a little with brand and load range. Use the chart as a comparison tool, then check the maker's numbers.

A chart also reveals when no close match exists. If the original is a wide 35-inch tire on a 17-inch wheel, the metric equivalent may need a taller sidewall than a 20-inch version of the same height. The wheel size changes the sidewall and the aspect ratio needed to reach the same diameter.

Flotation sizeApprox diameterApprox widthMetric size near it
33x12.50R2033 in12.5 in275/60R20 or 325/50R20
35x12.50R1735 in12.5 in315/70R17
35x12.50R1835 in12.5 in275/70R18 or 325/60R18
35x12.50R2035 in12.5 in325/60R20

Matching diameter within a tolerance

An overall diameter match keeps the speedometer, gearing, and clearance close to the original. A small difference in diameter changes the rolling circumference, which is the distance the tire travels in one turn. That change affects how the vehicle reads speed and how the drivetrain works.

A difference of a few tenths of an inch in diameter sits within normal variation between tire models. A larger jump changes the effective gear ratio and may cause a rubbing issue in the wheel well. Check clearance at full steering lock and under load before you fit a taller size.

When two candidates both match the diameter, choose the one whose section width is closest to your original. A much wider tire can contact suspension parts and the inner fender. A much narrower tire changes the contact patch and the look of the vehicle.

Plus sizing and same-diameter alternatives

Plus sizing moves to a larger wheel while keeping the overall diameter close to the original. A plus-one step adds an inch to the wheel and drops the aspect ratio to hold the diameter. Tire size alternatives with the same diameter follow the same rule for every wheel size.

The plus sizing method works because a larger rim needs a shorter sidewall to reach the same total height. A tire on a 20-inch wheel therefore needs a lower aspect ratio than the matching size on a 17-inch wheel. The section width can stay similar while the sidewall shrinks.

Same-diameter alternatives matter for winter setups, spare tires, and replacement shopping. Keep the wheel diameter the same and match the diameter and width as closely as the sizes allow. A spare that differs in diameter should only be used to reach a repair shop, not for regular driving.

Load index and speed rating on a substitute

The load index is a code for the maximum load a tire can carry at its rated pressure, and the speed rating is a letter for its maximum speed. A substitute size must carry a load index at least equal to the original for the vehicle. Lower load capacity can overload the tire and affect handling.

Load index and speed rating sit at the end of the size, such as 275/60R20 115T. Two sizes with the same diameter can have different load indexes because of their construction and load range. Compare the full service description, not only the size numbers.

For a heavy vehicle or a trailer, the load index matters as much as the diameter match. Ask a tire technician to confirm the substitute meets the vehicle's load requirement. An equivalent size that carries less load is not a safe replacement.

Checking a candidate before you buy

A candidate tire needs checks beyond the size numbers before it goes on the vehicle. Confirm the wheel width range, the load index, the speed rating, and the clearance around the tire. The tire maker's specification sheet lists these values for each size.

The wheel width must fall within the range the tire maker approves for that size. A tire that is too wide for the rim can wear unevenly and sit poorly on the bead. A tire that is too narrow for the rim can bulge and lose sidewall support.

Have a trained technician mount and balance the tire and check clearance and alignment. Do not fit a size that rubs or that changes the speedometer reading beyond what the vehicle can correct. A professional inspection protects the vehicle and the people in it.

Tire Size Equivalent Questions

What tire size is equivalent to 33x12.50R20?

A metric size near 275/60R20 or 325/50R20 comes close to 33x12.50R20 on a 20-inch wheel. The first matches the height and the second matches the width better, so neither is exact. Check the maker's diameter and width for the specific tire.

What tire size is equivalent to 35x12.50R17?

A 315/70R17 is a close metric equivalent to 35x12.50R17. The section width is about 12.4 inches and the diameter lands near 35 inches. Confirm the load index suits the vehicle before fitting it.

What tire size is equivalent to 35x12.50R18?

A 275/70R18 or a 325/60R18 comes near 35x12.50R18 in diameter on an 18-inch wheel. The 325/60R18 is wider and closer to the 12.5-inch section width. Verify the actual size on the tire maker's data sheet.

What tire size is equivalent to 35x12.50R20?

A 325/60R20 is a close metric equivalent to 35x12.50R20. The diameter is near 35 inches and the section width is about 12.8 inches. Load index and wheel width range still need a check.

Can I use a comparable tire size chart for any vehicle?

A comparable tire size chart compares dimensions only, so you still need to check load index, speed rating, and clearance for your vehicle. The chart shows candidates, not approvals. A trained technician should confirm the fit.

Is tyre size equivalents different from tire size equivalents?

Tyre and tire spell the same word, so tyre size equivalents and tire size equivalents describe the same comparison. The size markings follow the same inch and metric systems in both spellings. Use whichever spelling your region prefers and read the numbers the same way.

Read next

Latest articles