# Tire Size Compatibility Calculator and Checker

Use a tire size compatibility calculator to compare overall diameter, rim width range, load index and speed rating before you fit a new tire size to your vehicle.

A [tire size compatibility](/articles/tire-fitment-guide-checking-replacement-sizes-for-your-vehicle/) calculator compares the dimensions and ratings of a new tire size against the size your vehicle was built for. It takes the sidewall size markings and turns them into overall diameter, section width, [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) and rolling circumference. From those figures you can run a tire size compatibility check without guessing whether the tire clears the wheel and the body. The same tool works as a tyre size checker for anyone using British spelling. 

## Reading the sidewall size code 

Every compatibility check starts with the sidewall size code, a string such as 225/45R17 that packs several measurements together. The first number is the section width in millimeters, the second is the aspect ratio as a percentage of that width, and the letter gives the construction type. The number after the letter is the wheel rim diameter in inches. A prefix such as P-metric or LT sits in front of the code on some tires and signals the tire class the calculator should expect. 

## How the calculator works out diameter 

The calculator converts the sidewall size code into tire dimensions and then into an overall diameter. It multiplies the section width by the aspect ratio to get one sidewall height, doubles that figure and adds the wheel rim diameter. Section width is also converted so the result mixes metric and inch units correctly. Rolling circumference follows from the diameter and shows how far the tire travels in one revolution. 

## Checking rim width and ratings 

A rim width calculator compares the tire section width with the wheel width input and returns the rim width range the tire is designed for. Fitting a tire to a rim outside that range changes the shape of the sidewall and the contact patch. The checker also displays [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/), which must meet or exceed what the vehicle specs call for. A size that is geometrically close can still fail on these ratings, so read both figures. 

## Tire Size Compatibility Questions 

### What does a tire size compatibility calculator do? 

A tire size compatibility calculator converts the sidewall markings of an old and a new tire into comparable dimensions. It shows the difference in overall diameter, section width, rim width range and rolling circumference. You then judge whether the new size fits the wheel and the vehicle. It also lists load index and speed rating for a full fitment check. 

### Can I check the size of a used tire before buying it? 

A used tire size compatibility check works the same way as a new one, because the sidewall code carries every geometric figure the calculator needs. Read the code on the used tire and enter it beside the size your vehicle specifies. Confirm the load index and speed rating are still visible and adequate on the used sidewall. A worn or damaged sidewall where the markings cannot be read is a reason to walk away. 

### How do I check whether a wheel width suits my tire? 

A wheel width [tire size calculator](/articles/tire-size-calculator-diameter-comparison-material-44527/) compares the tire section width with the rim width and returns the permitted rim width range. Enter the wheel width in inches exactly as stamped on the rim, not a rounded figure. A tire mounted outside its rim width range sits distorted on the wheel. Have a trained tire technician confirm the final fitment before the wheel is mounted and balanced. 

### Will a different tire size change my speedometer reading? 

A different overall diameter changes the rolling circumference, so the speedometer error shifts with the new size. A larger diameter makes the vehicle travel farther per wheel revolution than the gauge assumes. The compatibility check reports the diameter difference so you can see the direction of the error. Only a trained specialist should recalibrate or certify the instrument after a size change.
