# Tire Size Chart for 18-Inch Wheels

Read an 18-inch tire size chart by breaking down metric sizes, aspect ratio and sidewall height, and learn how overall diameter and rim width fit an 18-inch wheel.

A [tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) for 18-inch wheels translates the metric numbers on a sidewall into section width, aspect ratio and overall diameter. The chart helps you compare a metric tire size against the 18-inch rim it must sit on, so the tire and wheel match in width and diameter. Understanding each number lets you read a size like 245/40R18 without guessing what it means. 

## Reading a metric size on an 18-inch rim 

Each metric tire size for an 18-inch rim ends in the number 18, which states the wheel diameter the tire is built to fit. The first number gives the section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, a percentage of the section width that sets the sidewall height. A size such as 245/40R18 therefore means a 245 mm section width and a sidewall equal to 40 percent of that width, mounted on an 18-inch wheel. 

## Turning metric sizes into overall diameter 

Overall diameter combines the 18-inch wheel with two sidewalls and is the figure a chart is really helping you compare. Multiply the section width by the aspect ratio to get sidewall height, double it, then add the wheel diameter converted to the same unit. A taller sidewall raises overall diameter, while a lower aspect ratio keeps it closer to the wheel size. Checking overall diameter against the original tire keeps the speedometer and clearance in a sensible range. 

## Where low profile sizes fit the chart 

Low profile sizes use a small aspect ratio, so the sidewall is short relative to the section width on an 18-inch wheel. These sizes suit a wider rim, because section width and rim width should stay within the range the tire maker lists. A very short sidewall leaves less cushion between the road and the rim, so a rough surface can damage the wheel. A trained tire technician should confirm fitment when a low profile size is near the limits of the rim. 

## Questions about 18-inch tire sizes 

### How do I convert a tire size for 18-inch wheels? 

A tire size conversion for 18-inch wheels starts from the metric markings rather than a separate table of equivalents. Read the section width in millimeters, apply the aspect ratio to get sidewall height, and add two sidewalls to the 18-inch wheel diameter. That gives the overall diameter, which you can compare with another size in the same way. The [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) on the [tire spec sheet](/articles/actual-tire-dimensions-by-size-nominal-sizes-vs-manufacturer-specifications/) then confirms whether the size suits your wheel. 

### What are some typical tire sizes for 18-inch rims? 

Tire sizes for 18-inch rims span a wide range, and the right one depends on the vehicle and the rim width rather than a fixed list. Metric sizes for 18-inch wheels appear with section widths from narrow to wide and aspect ratios from tall to low profile. A size like 225/45R18 and a size like 275/35R18 both fit an 18-inch wheel but suit different rim widths and vehicles. Check the vehicle placard and the tire maker's rim width range before choosing. 

### What is a low profile tire size for 18-inch rims? 

A low profile tire for an 18-inch rim uses an aspect ratio small enough that the sidewall is short compared with the section width. Sizes with an aspect ratio around 35 or 40 on a wide section are the low profile options in an 18-inch chart. The exact size must fall within the rim width range the tire maker specifies for that wheel. A short sidewall protects less against road impacts, so wheel damage becomes more likely on poor surfaces. 

### Does a wider tire change the overall diameter on an 18-inch wheel? 

A wider tire changes overall diameter only through the aspect ratio, because sidewall height is a percentage of section width. Two tires on the same 18-inch wheel can share an overall diameter when the wider one uses a smaller aspect ratio. Matching overall diameter to the original tire keeps the speedometer reading close to correct. Section width and rim width must also stay compatible, which the tire maker's fitment data confirms.
