Tire Sidewall Ply Material Codes

Read the ply material codes and construction letters on a tire sidewall and learn what they say about cord fabric, plies, and the load the tire carries.

3 min read2 viewsTire Sidewall Ply Material Codes
— · 0 votes
Contents
  1. Construction letters in the size
  2. Ply material letters explained
  3. Ply rating and load range
  4. Questions about sidewall construction codes
  5. What do the tire sidewall construction codes mean?
  6. What does the R and D mean in a tire size?
  7. How do I read the ply material on a tire sidewall?
  8. Is ply rating the same as a load range?

Tire sidewall ply material codes tell you what the cords inside the tire are made of and how the layers are laid. The sidewall shows a construction letter and material letters beside the tire size, and a separate line lists the ply material and rating. This page explains each letter and number so you can read a sidewall without guessing.

Construction letters in the size

The construction code sits inside the size string and tells you how the cords run. An R marks a radial tire, where the body cords run at right angles to the tread center. A D marks a bias-ply tire with diagonal overlapping layers, and a B marks a belted bias tire with belts added over diagonal plies. The letter describes carcass construction, not the rubber compound or the tread pattern.

Ply material letters explained

Ply material codes name the cord fabric used in the carcass and belts. P stands for polyester, N for nylon, R for rayon, and S for steel, and a tire may list more than one. A marking such as 2 polyester plus 2 steel tells you how many plies of each material sit inside. Steel appears in belts of passenger tires and in the body of heavier tires.

Ply rating and load range

A ply rating is an older strength index that came from the number of cotton plies a tire once had. A load range letter, such as C, D, or E, now expresses the same strength class on light truck and trailer tires. The rating and the material codes work together to describe how much load the tire carries. Always match the load range on the sidewall to the load the vehicle needs.

Questions about sidewall construction codes

What do the tire sidewall construction codes mean?

Tire sidewall construction codes state the carcass type and the cord material in one place. The letter in the size string shows whether the tire is radial, bias-ply, or belted bias. The material letters on the ply line show whether the cords are polyester, nylon, rayon, or steel, and how many plies of each are present.

What does the R and D mean in a tire size?

The R and D in a tire size are construction letters, with R standing for radial and D standing for diagonal bias-ply. A radial tire runs its body cords straight across from bead to bead, while a bias tire lays them at an angle. A B on the sidewall marks a belted bias tire, which adds belts over the diagonal plies.

How do I read the ply material on a tire sidewall?

The ply material appears on a line that names each cord fabric, often with a number in front of it. A figure of 2 polyester means two plies of polyester cord, and steel is listed the same way. Read every material on the line to see the full belt and carcass build of the tire.

Is ply rating the same as a load range?

Ply rating and load range express the same strength class in different ways, and both appear on the sidewall. Ply rating counts the old cotton plies the tire equals, while load range uses a letter such as C, D, or E. Match the load range to the load the vehicle needs, and follow the vehicle maker's specification.

Read next

Latest articles